The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5381

Pmod I2S2 is a module with 24-bit A / C and D / C audio converters derived from standard 3,5 mm Jack connectors. Thanks to them, it is possible to send and receive stereo audio signals using the I2S protocol. Digilent 410-379

Module with a button and a cover in red

Module with a stepper motor driver based on the DRV8434 system. It allows you to power a bipolar motor with a current of up to 1.2 A per phase and a voltage from 4.5 V to 48 V. Pololu 3762

This BLDC motor controller, based on the Allegro A89301 chip, enables sensorless control over a wide voltage range from 5.5 V to 48 V and phase current up to 11 A without additional cooling. It supports four control modes: analog voltage, PWM signal, pulse frequency, and via an I²C interface with the ability to configure parameters and save settings to EEPROM. The Field-Oriented Control (FOC) algorithm ensures quiet and efficient operation, while built-in protection protects the system against short circuits, reverse polarity, and undervoltage. Pololu 5356

This industrial relay module, powered by the Raspberry Pi RP2350B microcontroller, features six 10A 250VAC/30VDC relays and an isolated RS485 interface. It ensures safe and stable operation thanks to opto-isolation, power isolation, and surge protection. It supports programming in C/C++, MicroPython, and the Arduino IDE, and the 40-pin Pico HAT connector allows for easy expansion. Its robust DIN housing and 7–36V DC power supply make it ideal for industrial automation and IoT projects. Waveshare 31790

A module that provides a regulated, galvanically isolated power supply. It allows easy changing of the output voltage from 5 V to 3.3 V using the voltage selection pin (VSEL). Galvanic isolation between input and output effectively prevents problems related to ground loops and ground currents, ensuring stability and protection of the system. Pololu 5384

USB step-up switching converter with adjustable 0.5-30V output, up to 15W output power, CC/CV operation, integrated voltage, current and power display, thermal and short-circuit protection

The module with the TPL5110 timer, which can generate a signal with an adjustable period from 100 ms to 2 h. It also works well as an external Watchdog Timer. Adafruit 3435

Efficient step-down converter that reduces the input voltage from up to 45 V to a regulated output voltage range from 1.4 to 7 V, offering high efficiency and a maximum continuous current of 3.8 A. It has built-in protection against reverse polarity, overload and short circuit, and the spread spectrum function reduces EMI interference. The module is equipped with an additional potentiometer for adjusting the cut-off voltage. Pololu 4852

The AC-DC converter module converts the voltage in the range of 90-264V AC to 12V DC with a maximum current of 600mA and a power of 3W. It is characterized by a long life (MTBF 100,000 h), a slow start of 50 ms, and a maximum input current of 0.2A.

A step-down converter module that allows you to reduce the input voltage from 9.2–36V to a stable 9V, ensuring high efficiency thanks to SMPS technology. A maximum output current of 600mA allows you to power microcontrollers, IoT modules, and other electronics. The device is equipped with short circuit and overheating protection and offers very low quiescent current. Pololu 5596

The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 30 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5380

The STEVAL-ISB043V1 is a Qi-based 2.5 W wireless power receiver evaluation board based on the STWLC33 and suitable for wearable applications. The STEVAL-ISB043V1 provides a complete kit, which includes the STWLC33 IC, firmware, layout and tools

HAT with TB6612FNG engine controller and PCA9685 PWM controller designed for Raspberry Pi minicomputers. The board is equipped with a 40-pin connector characteristic of Raspberry Pi, making it compatible with all minicomputers with this connector. Waveshare Motor Driver HAT

The SN74LVC1T45DRLR from Texas Instruments is a single-channel, bidirectional voltage level translator, covering a range from 1.65 V to 5.5 V, ideal for signal conversion in microprocessor systems and mobile devices. With automatic detection of the transmission direction and a compact SMD SOT-5X3 package, the device is easy to implement and works well in limited mounting spaces.

16-channel I/O port expander module controlled by the I2C interface. The module is based on the MCP23017-E/SS system.

Step-Down DC-DC converter module based on the D36V6F6 chip. Input voltage 6.2..50V, output voltage 6V (max. 600mA). Pololu 3793

A 16-bit DAC converter module designed to work with M5Stack sets. It enables the conversion of analog signals into a digital signal. M5Stack ADC Unit

ESC controller module for a brushless motor with a current capacity of up to 40 A. It can work with LiPo packages from 3S to 6S. Uses BLHeli_32 software. Skystars Talon32