Category: Electronic modules

Module with DC motor driver DRV8874. It can work with motors supplied with the voltage from 4.5 to 37 V and current consumption up to 2.1 A. Pololu 4035

Pololu - 3498

Crossover for tweeters with a crossover frequency of 3400 Hz. It works with speakers with an impedance of 4 to 8 Ω and offers power up to 60 W

Force-Sensing Resistor - 1.5" Square

DC-DC Step-Up converter U3V40F7 with an output voltage of 7.5 V, an input voltage of 1.3 to 7.5 V and a maximum output current of 4 A. Pololu 4014

Industrial grade USB-UART TTL converter. Equipped with a number of security features ensuring stable and safe communication. Waveshare USB TO TTL (B)

Module with real-time clock and CR1225 battery socket for voltage backup. It communicates via the I2C interface. Seeed Studio 103030277

Expansion board with L6474 stepper motor driver. It is equipped with a connector compatible with Arduino Uno R3 and STM32 Nucleo. STMicroelectronics X-NUCLEO-IHM01A1

Module with a button and blue LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020046

Converter with a built-in microcontroller (MCU) and a CAN transceiver system. It can work with devices with an operating voltage of 3.3 V via goldpin connectors with a pitch of 2.54 mm. The converter facilitates the design and prototyping of devices based on the CAN bus. Waveshare WS-TTL-CAN

Module designed to operate four incremental encoders. It reads the encoder rotation and transmits the information via the I2C interface. Adafruit 5752

The expansion module to support two cameras is designed for Raspberry Pi minicomputers. The board allows you to connect two cameras via CSI connectors to one minicomputer connector. ArduCAM B016601

I2C multiplexer module with TCA9548A system. Allows you to connect up to 8 devices. The system works like a gateway - it transmits I2C interface data to one of the 8 main busses. This allows you to connect up to 8 devices with the same address. DFRobot DFR0576

Module with the PAM8904 controller designed specifically to control piezoelectric elements. The amplifier operates over a wide frequency range, up to 300 kHz, and allows for gain up to approximately 13 Vpp. Adafruit 5791

The transceiver module of the DP83848 Ethernet interface

Module with a bidirectional converter for the I2C bus, based on the PCA9306 system. It allows you to connect two I2C modules operating with different voltage levels. SparkFun BOB-15439

The UX-52 panel brush motor speed controller is a versatile device with speed adjustment from 90 to 1400 rpm. It offers precise control of motors with an input voltage of 220VAC, featuring a solid construction and a convenient digital display.

The Step-Up converter module converts the voltage in the range of 10-60V to 12-90V with an efficiency of 97% and operates in the temperature range of -20°C to 65°C. The maximum current is 40A at the input and 22A at the output, with a weight of 400g.

Module with TCS3200D system - sensor of RGB light components

Module with EEPROM memory, capacity 512 kbit (64kB). Communication takes place via the I2C interface. The module has 3 jumpers that enable selection of one of 8 addresses. SparkFun SPX-14764