Category: Converters USB - UART / RS232

BOB-12731

USB - UART converter based on the CH9102F chip. Compatible with the voltage of 3.3 V and 5 V, it has been equipped with a USB type C connector. Adafruit 5568

USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi, RoHS

BOB-13263

The module with the converter USB-UART CP2104 dedicated for minicomputers Raspberry Pi. Adafruit 3589

USB - UART converter based on the PL2303GS chip. Compatible with 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a mini USB connector. Waveshare PL2303 USB UART Board (mini) V2

Cable with USB-UART converter dedicated to TFmini and TFmini Plus distance sensors. Ended with a USB type A plug and goldpin connectors. Benewake USB-Dupon

UART-RS232 converter module. It enables communication of Arduino boards with industrial modules. DFRobot DFR0258

USB - RS485/RS422/RS232 converter designed to convert USB signal to serial signal. It is used to connect devices with USB interface to RS485, RS422 or RS232 network. It uses ADI (Analog Devices iCoupler) galvanic isolation technology. EVC8013B

USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174

Easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH; works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers; uses the CH340G IC to quickly and easily convert serial signals to USB. DEV-14050

USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, it is equipped with a microUSB connector. Cytron UC00A

The UART-USB converter built on the FTDI FT232RL chip. Compatible with 3.3V and 5V voltages. DFRobot DFR0065

The converter enables simple connection of the project being built with the UART output to the computer via a USB interface. After connecting to a computer, a virtual COM port is created. MOD-05 / AZ

USB - RS-232 USB A (m) / D-Sub (m) cable with a length of 1 m. Akyga AK-CO-02

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets. Adafruit 954

UART converter - USB based on the FT232RL system with TX, RX, RTS and CTS lines led out to the goldpin female connector. It uses a mini USB connector. Adafruit 284

Compact programmable industrial controller Tibbo BASIC/C with Ethernet and Wi-Fi connectivity. The DS1102 is designed for Serial-over-IP and industrial automation applications. Tibbo DS1102