Category: Motors

A small motor with a plastic gear 120:1, the output shaft at an angle of 90° with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and maximum torque 1.4 kg*cm. Pololu 1124

Adapter that allows you to easily mount the wheels on a motor with a shaft diameter of 3 mm using screws size 4-40. The hub fits both round and D-shaped shafts. Pololu 1078

Pololu Universal Aluminum Mounting Hub for 3mm Shaft Pair, 2-56 Holes

1000:1 Micro Metal Gearmotor HP

Unipolar/bipolar stepper motor. It has a resolution of 200 steps/revolution (1.8° per step), a nominal voltage of 5.7 V, and has a current consumption of 1 A per coil. Pololu 1476

Motor with 25 mm diameter and 67 mm length, 47:1 metal gear, 12 V operating voltage, 0,3 A to 5,6 A power consumption, 210 RPM speed, 12 maximum torque and 48 CPR encoder. Pololu 4845

Solarbotics GM10 81:1 Geared Pager Motor

This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 210.59:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

Hybrid bipolar stepping motor with integrated 38cm (15″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7A at 2.8V, allowing for a holding torque of 3.7kg-cm (51 oz-in). Pololu 2690

DAGU gearmotors; 4.5V with a no load current of 190mA while possessing a gearbox ratio of 48:1 and a wheel speed of 140 RPM unloaded. axis. ROB-13302

A mini water pump with an flow of 120 l/h designed for home automatic irrigation systems. It is immersed in water, powered with the voltage from 6 to 12 V and has a power of approx. 3.6 W

A mini water pump with an efficiency of 230 l/h designed for home automatic irrigation systems. It is immersed in water, powered with the voltage from 6 to 12 V and has a power of approx. 4.2 W

Miniature high-power motor from the Pololu MP series. Gear motor 250: 1, shaft speed is 90 rpm, torque is 3 kg * cm (0.3 Nm). The motor has an extended shaft which makes it easy to attach the encoder. Pololu 2384

This gearmotor is a miniature high-power, 6 V brushed DC motor with a 986.41:1 metal gearbox, making it a great choice for applications requiring fine control at very low speeds. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 4.4:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 211.2 counts per revolution of the gearbox’s output shaft.

These 17 mm long aluminum adapters convert a 3 mm diameter shaft to a 12 mm hex shaft that compatible with many common hobby RC wheels. The set includes two adapters, two M4 screws for securing wheels to the adapters, four M3 set screws for securing the adapters to motor shafts, and one 1.5 mm Allen wrench for use with the set screws.

Water pump with a capacity of 1300 l/h. It has a built-in electronic reed switch sensor and is powered by 12 or 24 V

This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

The turbo metal gear worm motor uses a metal gear box for durability and a high torque output. Due to the special mechanical structure of the worm drive the motor output shaft is self locking and can not be rotated. FIT0489-B

This gearmotor is a miniature low-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.