Module with proximity and ambient light sensor based on the VCNL4020 system. It allows you to detect obstacles in the range from 0 to 20 cm and measure light intensity from 0.26 to 16,000 lux. It communicates via the I2C bus. Adafruit 5810

Module with 6 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4406

The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board.

A miniature lidar distance sensor that detects objects up to 100 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (100 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5483

Module with 7 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4447

Module for high temperature measurement with a range from -200°C to 700°C dedicated to a probe with a K-type thermocouple. Communication via SPI. SparkFun SEN-13266

Module with ACS724LLCTR-10AU current sensor with a measuring range of direct and alternating current from 0 to 10 A. It communicates via an analog interface. Pololu 4042

Module with a digital distance sensor with a range of up to 15 cm. It has a digital output that goes low when an object is detected. Pololu 4054

Module with a digital distance sensor with a range of up to 200 cm. It has a digital output that goes low when an object is detected. Pololu 4077

Compact module with three I2C sensors, enabling measurement of temperature, humidity, pressure, light, proximity and motion. It offers two Qw/ST connectors, so you can quickly connect it to Raspberry Pi, Pico or other microcontrollers. Ideal for IoT applications, home automation and environmental analysis in mobile or stationary projects. Pimoroni PIM745

Wind direction sensor with a measuring range up to 60 m/s and 360° ensures high accuracy and fast response time, thanks to the use of low-resistance bearings and precision components. It supports various output signal types, including analog (0–5 V, 4–20 mA) and digital (RS485, LoRa, GPRS, 4G), enabling broad integration in meteorological, agricultural, and industrial systems. The durable polycarbonate construction and IP65 protection rating ensure reliable operation even in harsh environmental conditions.

The module with the MCP96L01 amplifier designed to work with a thermocouple type K, J, T, N, S, E, B, or R. It has a screw connection for connecting a thermocouple and communicates via I2C. Adafruit 5165

This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals. Pololu 5411

IMU module based on the Bosch BHI385, integrating a 3-axis accelerometer, 3-axis gyroscope and a 32-bit ARC EM4 processor for sensor data processing. Bosch BSX sensor fusion provides outputs including 3D orientation, step counting, tap detection and wrist gesture recognition without requiring these calculations to be performed by the host microcontroller. Soldered 333375

A module with a temperature and humidity sensor based on the AHT20 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4566

A modern current sensor with a measurement range of -40 A to +40 A, combining the Hall effect with an inductor, allows for precise measurements of both DC and AC components up to 5 MHz. Its lightning-fast response time and low path resistance make it ideal for motor control systems, power converters, and protection systems. Pololu 5231

Compact light sensor that provides precise measurement of both illuminance (10–10000 Lux) and correlated color temperature (2700K–6500K), with low measurement errors. Thanks to I2C and UART interfaces, the sensor easily integrates with platforms such as Arduino or Raspberry Pi, making it an ideal tool for photographers, filmmakers and projects requiring lighting control. DFRobot SEN0611

Laser ToF distance sensor based on the VL53L1X, providing distance measurements up to 4 m at a ranging frequency of up to 50 Hz. Equipped with a Class 1 940 nm infrared emitter and SPAD receiver, it communicates via the I2C interface. The module operates from a 3.3 V to 5 V supply and comes with a pre-installed 200 mm GH4P cable. Designed for use with the Pixhawk 4 flight controller. Holybro ST VL53L1X Lidar

Breakout board with the Bosch BME688 sensor for measuring temperature, relative humidity and atmospheric pressure as well as monitoring gases and indoor air quality, including VOCs. It communicates via I2C, features two Qwiic connectors and supports Arduino, MicroPython and Bosch BME AI-Studio. Soldered 333203

Compact expansion with advanced data monitoring features, equipped with temperature, humidity, light sensors and RTC clock. With low power consumption, battery monitoring function and I2C protocol support, it is ideal for long-term battery-powered projects, offering precise measurements and efficient power management. Seeed Studio 114993446