The module with the MAX30100 chip that monitors the oxygen content in the blood and the heart rate. It consists of two LED diodes, a photodetector, optimized optics and low noise analog signal processing. modMAX30100

UV Sensor with response spectrum: 200nm-370nm

Module with a 2-channel inductive sensor LDC1612. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020599

Module with 16 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4356

Pololu - 2737

The UM7-LT orientation sensor from Redshift Labs is an Attitude and Heading Reference System (AHRS) that contains a three-axis accelerometer, rate gyro, and magnetometer. It combines this data using an Extended Kalman Filter to produce attitude and heading estimates. This LT version of the UM7 does not have an enclosure.

Module with 13 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4453

Crowtail-PIR Motion Sensor 2.0 is a digital motion sensor for use in alarm systems, building automation and interactive projects. It provides a wide detection angle and adjustable range in a compact form with easy connection through the Crowtail interface.

Matrix module of six reflection sensors for the Zumo robot. The module allows you to easily add line detection or edge detection to the robot. Pololu 1419

QTR-3A Reflectance Sensor Array

Miniature pressure measurement module equipped with a 25 psi piezoresistive pressure sensor. It allows you to perform calibrated and compensated pressure measurements from 60 mbar to 2.5 bar. SparkFun SEN-16476

The MQ-8 module allows the measurement of hydrogen concentration in the air. It has an analogue output and an output triggered by exceeding the threshold of sensitivity.

A miniature lidar proximity sensor that detects objects up to 5 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (142 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5460

Ultrasonic distance sensor with a range of up to 5m. Communication takes place via the I2C interface. The module is supplied with the voltage from 3.3 to 5.5 V. DFRobot SEN0304

A miniature lidar proximity sensor that detects objects up to 15 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (142 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5464

A miniature lidar proximity sensor that detects objects ranging from less than 1 mm to 50 cm by generating a PWM signal proportional to distance. It operates in a 3-5.5 V range, draws 30 mA, features an ENABLE pin for sleep mode, and a 3-pin JST SH connector and indicator LED. Its color, transparency, and light-sensitive nature make it ideal for robotics, automation, and contactless interfaces. Pololu 5472

A miniature lidar distance sensor that detects objects up to 10 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (142 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5552

SEN-11207 - Flexiforce Pressure Sensor - 25lbs (1" area)

Module with 25 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4325

Analog Slide Position Sensor