Light & Motor Driver V1.0 - universal driver for DC motors and LED
ID: 588825
5902186314368
zł59.13
Tax included
zł48.07 tax excl.
Universal driver for DC and LED motors. It can work with a supply voltage from 5 V to 24 V and a load up to 10 A. DFRobot DRI0050
Description
Universal driver for DC and LED motors based on a MOSFET transistor. It can work with a supply voltage from 5 V to 24 V and a load up to 10 A. It offers 4 control modes: UART interface, USB, analog input or using Python code. It can be used to control a wide range of devices, including fans, pumps, DC motors, and LED strips up to 5 m in length. Full documentation and application examples are available on the product page.
Features
- Input voltage range: 5V to 24V
- Maximum control current: 10 A
- PWM duty cycle adjustment range: 0 to 255
- PWM frequency adjustment range: 183 Hz to 46 875 Hz
- Number of PWM channels: 1
- Start/Stop button
- Control Mode:
- Adjustment by means of an external potentiometer
- UART interface
- USB communication
- Control via Python code
- USB type C interface
- UART interface: PH2.0-4P
- Connector for external potentiometer
- Mounting hole: 30 x 50 mm, diameter 3.1 mm
- Dimensions: 37 x 57mm
Kit contains
- Light & Motor Driver V1.0
- Gravity cable 4-pin
588825
Data sheet
- Output current
- 10A
- Number of channels
- 1
- Supply voltage min
- 5 V
- Supply voltages max
- 24 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Motor with 20 mm diameter and 44 mm length, 100:1 metal gear, 12 V operating voltage, 0.08 A to 1.6 A power consumption, 140 RPM speed and 6.1 kg*cm maximum torque. Pololu 3490
zł202.05
Delivery date unknown
No product available!
Motor with 37 mm diameter and 57 mm length, 100:1 metal gear, 12 V operating voltage, 0,2 A to 5,5 A power consumption, 100 RPM speed and 34 maximum torque. Pololu 4745
zł249.92
Delivery date unknown
No product available!
DC motor equipped with a plastic gear 48:1 with a cut shaft on both sides and an additional shaft for connecting an encoder
zł5.14
Delivery date unknown
No product available!
Other products in the same category (16)
A two-channel DC motor controller with a UART TTL interface. It is powered from 1.8 V to 22 V and can deliver up to 1.6 A per motor. Board with connectors for assembly. Pololu 5081
zł78.95
24h
Available quantity: 2
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5052
zł332.37
4 weeks
No product available!
DC motor driver that allows you to control the movement of three drives using the I2C interface. Board with soldered connectors. Pololu 5033
zł226.36
24h
Available quantity: 1
Available
ual MAX14870 Motor Driver is a dual DC motor driver compatible with the Raspberry Pi standard that allows you to control two DC motors with 4.5 ... 36V continuous current of 1.7A. Pololu 3758
zł111.39
24h
Available quantity: 2
Available
KAmodMPC17C724 is a module with a double MP bridge bridge type MPC17C724. The system allows you to control two DC brush motors or one bipolar stepping motor. The controller operates at a voltage range of 2.7 - 5.5 V and can work with motors with power consumption up to 0.4 A.
zł19.90
24h
Available quantity: 336
Available
A single-channel DC motor controller with a UART TTL interface. It is powered from 4.5 V to 48 V and can deliver up to 2.2 A of current. Board with connectors for assembly. Pololu 5063
zł80.44
4 weeks
No product available!
This Kit with fully-dedicated PWM driver chip handles all the motor and speed controls over I2C. Only two data pins (SDA & SCL in addition to the power pins GND & 5V) are required to drive the multiple motors; you can also connect any other I2C devices or shields to the same pins. This makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3. Adafruit 1438
zł102.94
24h
Available quantity: 3
Available
Pololu Low-Voltage Dual Serial Motor Controller
zł158.61
24h
Available quantity: 1
Available
Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 1.2 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-3AMOTOR
zł111.29
24h
Available quantity: 2
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board without connectors. Pololu 5047
zł406.69
4 weeks
No product available!
Pololu G2 18v25 High Power is a miniature DC motor controller. Driver\'s power supply: 6.5 ... 30V. Current capacity of the module: 25A. The module has protection against back voltage and overvoltage. Pololu 1366
zł677.82
24h
Available quantity: 1
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5055
zł605.06
4 weeks
No product available!
DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3142
zł225.57
24h
Available quantity: 1
Available
Available
A two-channel DC motor controller with a UART TTL interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. Board with connectors for assembly. Pololu 5067
zł119.21
4 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board without connectors. Pololu 5038
zł302.09
4 weeks
No product available!
Universal driver for DC and LED motors. It can work with a supply voltage from 5 V to 24 V and a load up to 10 A. DFRobot DRI0050