Bluetooth 4.0 HM-11 module
ID: 565013
5906623473458
zł22.63
Tax included
zł18.40 tax excl.
Bluetooth module with built-in CC2541 chip. The module is small, energy-saving and easy to use
Description
Bluetooth module with built-in CC2541 chip. The module is small, energy-saving and easy to use. It has pads for surface soldering (SMD).
properties
- Bluetooth version 4.0 BLE
- Operating frequency: 2.4 GHz
- Communication via the UART serial port
- Default data rate: 115.2 kbps
- Modulation: GFSK
- Range in the open space: 30 m
- Receiver sensitivity: -90 dBm
- Power supply range: 2.0-3.6 V
- Permissible operating temperature: -40 ~ 65 ° C
- Dimensions: 13.5 x 18.5 x 2.3 mm
565013
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The module with the HC-05 transceiver makes it easy to add Bluetooth communication to an existing project. The system is controlled by exchanging AT commands (UART bus). FC-114
zł47.05
24h
Available quantity: 20
Available
HC-08 is a module operating in the Bluetooth Low Energy 4.0 standard. The system has a built-in antenna and small dimensions, and thanks to edge joints it can be surface soldered. The module is configured via AT commands
zł48.79
24h
Available quantity: 31
Available
Bluetooth module with integrated HC-08 system. Thanks to the angular pin connector with the bus signals, it is possible to easily connect the module to the contact plate or wires
zł48.39
Delivery date unknown
No product available!
DFRobot BLE4.1 Module is a Bluetooth 4.1 module with DA14681 processor with 3.3 V power supply. It is characterized by low energy consumption and advanced energy management system (built-in charging module). DFRobot TEL0120
zł78.71
24h
Available quantity: 1
Available
Bluetooth 4.0 BLE module powered with 3.3V voltage based on SOC TI CC2541 (On Chip). The module has a range of up to 10m and communicates via the UART interface.
zł19.31
24h
Available quantity: 8
Available
Other products in the same category (16)
Bluetooth 4.0 dongle as a USB adapter. Works with bluetooth devices such as speakers, headsets, smartphones, tablets, keyboards, mice, printers, projectors etc.
zł16.78
24h
Available quantity: 9
Available
A development board that combines the u-blox NINA-B306 Bluetooth module, the ISM330DHCX 6DoF IMU sensor, and the BME280 atmospheric pressure sensor. It has a built-in Qwiic connector and LiPo battery connector as well as a charger and LiPo parameters monitor. SparkFun WRL-20854
zł499.00
3 weeks
No product available!
Evaluation Kit with Bluetooth 5.0 BT401. It is equipped with a microSD slot, microUSB connector and two audio outputs. DFRobot DFR0782
zł80.44
24h
Available quantity: 1
Available
The module is compatible with the Grove Base Shield and designed to implement a wireless serial connection. It uses BluetoothV2.0+EDR and UART communication. Seeed Studio 113020008
zł110.24
24h
Available quantity: 3
Available
Low Energy Bluetooth adapter module with USB 2.0 connector. allows communication with BLE devices
zł134.38
24h
Available quantity: 1
Available
Bluetooth 5.2 and IEEE 802.15.4 communication kit. It uses the STM32WB55RG microcontroller (1 MB Flash, 256 KB SRAM, ARM® Cortex®-M4 and Cortex®-M0 +). STMicroelectronics NUCLEO-WB55RG
zł177.44
24h
Available quantity: 4
Available
Bluetooth 4.0 BLE module powered with 3.3V voltage based on SOC TI CC2541 (On Chip). The module has a range of up to 10m and communicates via the UART interface.
zł19.31
24h
Available quantity: 8
Available
The module with the HC-05 compatible transceiver makes it easy to add Bluetooth communication to an existing project. The system is controlled by exchanging AT commands (UART bus)
zł39.90
24h
Available quantity: 40
Available
Evaluation kit with Bluetooth 5.0 Sparkfun Artemis module. Equipped with a microphone, kmaers and accelerometer. SparkFun DEV-16828
zł153.80
24h
Available quantity: 1
Available
Energy-saving Wi-Fi and Bluetooth 5.0 module compliant with the IEEE 802.11 a/b/g/n/ac standard. Ampak AP6256
zł46.83
24h
Available quantity: 2
Available
The Vtec by BLOW Bluetooth 4.0 OBD2 diagnostic interface is an advanced tool for monitoring vehicle parameters and diagnosing faults. It allows reading and deleting errors, analyzing performance and controlling engine operation in real time. Thanks to its compatibility with Android, iOS, Windows and MacOS systems and support for popular diagnostic applications, it is a convenient solution for every driver who cares about the technical condition of their vehicle. Vtec iTRON by BLOW
zł60.93
24h
Available quantity: 7
Available
The Microchip RN4020 module is an energy-saving Bluetooth v4.1 module with a built-in antenna; transmit power level + 7dBm, AES128 coding
zł99.61
24h
Available quantity: 2
Available
The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478
zł49.19
24h
Available quantity: 8
Available
ModCC2540-A1 allows the use of Bluetooth transmission features BLE 4.0 - thanks to the built-in CC2540 chip, it is possible to create complex projects without the use of an additional microcontroller. modCC2540-A1
zł30.80
24h
Available quantity: 4
Available
KAmodBT-HC05 is a Bluetooth module configured via AT commands. It has integrated LEDs indicating operating mode and connection status with the paired device, as well as a logic level translator on UART lines. KAmodBT-HC05
zł49.90
24h
Available quantity: 74
Available
Bluetooth 5 module with nRF52840 chip. It is based on the ARM Cortex-M4 core with 1 MB Flash memory and 256 KB RAM memory. It is equipped with a USB interface. SparkFun DEV-15025
zł193.64
3 weeks
No product available!
Bluetooth module with built-in CC2541 chip. The module is small, energy-saving and easy to use