- Out-of-Stock
Arducam Pan Tilt Platform - 2 DOF Platform for the camera for Raspberry Pi
ID: 579818
Set with 2 DOF control platform for cameras designed for Raspberry Pi minicomputers. The platform is based on two digital servos that allow you to control the position of the camera in two dimensions. ArduCAM B0227
Description
Set with 2 DOF control platform designed for Raspberry Pi minicomputers. The control platform is based on two digital servos that allow you to control the position of the camera in two dimensions, making movements 180 degrees horizontally and 145 degrees vertically. A servo board with 12-bit PWM PCA9685 controller and a light sensor was used to control the servos.
Attention!
Minicomputer Raspberry Pi and the camera visible in the picture is not included in the set. It must be purchased separately.
The product is also available in a set with a 5 MP OV5647 camera.
Features
Digital Servo GH-S37D
- Torque: 0.6 kg/cm at 3.6V, 0.8 kg/cm at 4.8V
- Operating Speed: 0.13sec/60° at 3.6V, 0.09sec/60° at 4.8V
- Operating Voltage: 3.6v~4.8v
- Operating Current: <350mA
- Dead Band: 3 usec
- Dimension: 20 x 8.75 x 22mm
Control Board
- PWM Driver: PCA9685
- PWM resolution: 12-bit
- Ambient light sensor: TSL2581FN
- Ambient light resolution: 16-bit
- Communication interface: I2C
- Operating voltage: 3.3V/5V
- Dimension: 25 x 61mm
Kit contains
- 2 x Digital servo
- A set of bracket elements and screws
- PWM control board
- 4 x F-F connection cable
- 2 x M-F connection cable
579818
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł393.90
24h
Available quantity: 41
Available
Set with 5 MP camera and 2 DOF control platform designed for Raspberry Pi minicomputers. The camera is equipped with an OV5647 sensor, equipped with an integrated IR filter. The control platform is based on two digital servos that allow you to control the position of the camera in two dimensions. ArduCAM B0033PT
Delivery date unknown
No product available!
Other products in the same category (16)
Fully programmable signal emulator, simulator to characterize, test and certify ISO 7816 and SWP (HCI, HDLC) implementation in mobile phones
Retired
No product available!
No product available!
Development board with ATmega328P microcontroller equipped with 14 I/O lines, 6 PWM channels, 6 analog inputs and FT231X chip. Compatible with Arduino UNO Rev3. Cytron CT-SE
Retired
No product available!
No product available!
No product available!
Touchpanel for 128x64 M-series and CG-series displays, 67.5x47.8mm, ZIFF tape
Retired
No product available!
No product available!
Permanent cylindrical neodymium magnet with a diameter of 3 mm and a height of 2 mm.
Retired
No product available!
No product available!
T. Engin Tuncer, Benjamin Friedlander
Delivery date unknown
No product available!
No product available!
No product available!
No product available!
nRF51 DK is a development board based on the nRF51422 system with Bluetooth Low Energy (BLE) and 2.4 GHz connectivity. The module has a connector compatible with Arduino shields, buttons and diodes available to the user.
Retired
No product available!
Set with a 7.5" e-Paper display with passive power via NFC, NFC module and microSD card. Waveshare 7.5inch NFC-Powered HD e-Paper Eval Kit
Retired
No product available!
No product available!
Set with 2 DOF control platform for cameras designed for Raspberry Pi minicomputers. The platform is based on two digital servos that allow you to control the position of the camera in two dimensions. ArduCAM B0227