CT220BMV-HS5 Contactless Current Sensor - module with a non-contact current sensor ±1.5mT/15G
ID: 1199030
5902186323049
zł18.77
Tax included
zł15.26 tax excl.
A non-contact magnetic field sensor with a range of ±1.5 mT and a sensitivity of 1500 mV/mT at 5 V. It offers an analog ratiometric output and a flag signal activated when field thresholds are exceeded. It features a fast response time (20 µs) and a 30 kHz bandwidth with a built-in RC filter. Its compact design, AC/DC capability, and easy mounting make it ideal for energy-efficient and safe current monitoring systems. Pololu 5352
Description
CT220BMV-HS5 Contactless Current Sensor Carrier Module is a compact board featuring a sensor from Allegro Microsystems, based on XtremeSense™ TMR (Tunnel MagnetoResistance) technology, designed for non-contact current measurement.
This solution enables precise current measurement without breaking the circuit – the sensor detects the magnetic field generated by current flowing through a nearby conductor. TMR technology ensures high sensitivity and low power consumption, making it ideal for energy-efficient applications.
The device offers high linearity, resolution, and temperature stability, while maintaining excellent electrical isolation. The analog output, proportional to the magnetic field strength, allows for accurate current measurements after proper calibration. The sensor operates in bidirectional mode, supporting both DC and AC systems. Its compact size and mounting holes allow for easy attachment to a wire. The JST SH connector and 2.54 mm pitch through-holes provide flexible connectivity options. Additionally, the FLAG output signals when the magnetic field exceeds a specified threshold. This module is an ideal solution for projects that require safe and reliable current monitoring.
CT220BMV-HS5 supports a magnetic field range of ±1.5 mT (±15 G). It offers output sensitivity of 1500 mV/mT at 5 V supply voltage or 990 mV/mT at 3.3 V. The sensor operates at a supply voltage range of 2.7 V to 5.5 V, with a zero-output voltage of 2.5 V at 5 V supply. The actual current measurement range and sensitivity depend on the distance between the sensor and the conductor, its geometry, and orientation relative to the board. For best results, it is recommended to calibrate the sensor in the target setup, especially for varying wire diameters and insulation thicknesses.
Features
- Sensor model: Allegro CT220BMV-HS5
- Magnetic field measurement range: ±1.5 mT (±15 G)
- Sensitivity at 5 V: 1500 mV/mT
- Ratiometric analog output (centered around VDD/2)
- FLAG output active when exceeding 90% or dropping below 10% of the magnetic range
- Response time: typically 20 µs
- Bandwidth: 30 kHz (with built-in RC filter)
- Connectors: JST SH 4-pin or 0.1″ (2.54 mm) through-holes
- Supply voltage: 2.7 V to 5.5 V
- Current consumption: approx. 1.2 mA
- Operating temperature: −40 °C to 125 °C
- Dimensions: 10.2 × 15.7 × 5 mm
- Weight: 0.4 g
1199030
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±80 A
- Sposób podłączenia
- Nieinwazyjny
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with ACS724LLCTR-05AB current sensor with a measuring range of direct and alternating current from -5 to 5 A. It communicates via an analog interface. Pololu 4041
zł38.40
24h
Available quantity: 1
Available
Module with ACS724 current sensor with a measuring range of direct and alternating current from 0 to 10 A. It communicates via an analog interface. Pololu 4045
zł44.72
Delivery date unknown
No product available!
Module with ACHS-7122 current sensor with a measuring range of direct and alternating current from -20 to 20 A. It communicates via an analog interface. Pololu 4031
zł19.90
24h
Available quantity: 9
Available
Allegro\'s TMR sensor module enables precise, non-contact current measurement without breaking the circuit. It offers high sensitivity, low power consumption, an analog output proportional to the magnetic field, and a threshold detection (FLAG) function. Its compact design, AC/DC support, and easy installation make it ideal for energy-efficient and safe current monitoring systems. Pololu 5355
zł18.77
24h
Available quantity: 3
Available
Other products in the same category (16)
Module with ACHS-7123 current sensor with a measuring range of direct and alternating current from -30 to 30 A. It communicates via an analog interface. Pololu 4032
zł17.92
24h
Available quantity: 2
Available
ACS714 Current Sensor Carrier -30 to +30A
zł49.70
24h
Available quantity: 2
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5446
zł17.10
4 weeks
No product available!
The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5245
zł21.37
24h
Available quantity: 3
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and its low current path resistance (~1.6 mΩ) minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5450
zł17.99
4 weeks
No product available!
Available
Module with ACHS-7122 current sensor with a measuring range of direct and alternating current from -20 to 20 A. It communicates via an analog interface. Pololu 4031
zł19.90
24h
Available quantity: 9
Available
Precision Hall effect current sensor offering galvanic isolation, wide bandwidth of 150 kHz and the ability to measure AC and DC current with very low power loss. Thanks to differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5291
zł29.32
24h
Available quantity: 4
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5256
zł56.70
24h
Available quantity: 2
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5251
zł58.78
24h
Available quantity: 2
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±10 A range with galvanic isolation. It features an analog VOUT output with a sensitivity of 132 mV/A and a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance (~1.6 mΩ) minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5440
zł15.72
6 weeks
No product available!
Precision Hall effect current sensor, providing galvanic isolation and wide 250 kHz bandwidth. Low conductive path resistance, magnetic interference immunity and ratiometric analog output make it ideal for AC and DC current monitoring applications. Pololu 5281
zł71.46
24h
Available quantity: 2
Available
ACS724LLCTR-20AU current sensor module with a current measurement range from 0 to 20 A. It communicates via an analog interface. Pololu 4044
zł42.14
24h
Available quantity: 2
Available
A compact Hall-effect current sensor that provides accurate DC and AC current measurement within a ±30 A range with galvanic isolation. It features a high-sensitivity analog VOUT output with a 150 kHz bandwidth, enabling fast and precise readings in dynamic systems. The module operates over a wide temperature range of -40°C to 125°C, and the low current path resistance minimizes energy loss. Its small size and flexible mounting options make it ideal for prototyping, industrial systems, and space-constrained projects. Pololu 5445
zł17.10
4 weeks
No product available!
ACS724LLCTR-30AB current sensor module with a DC and AC measurement range from -30 to +30 A. It communicates via an analog interface. Pololu 4047
zł42.14
24h
Available quantity: 5
Available
The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5257
zł58.79
24h
Available quantity: 2
Available
A non-contact magnetic field sensor with a range of ±1.5 mT and a sensitivity of 1500 mV/mT at 5 V. It offers an analog ratiometric output and a flag signal activated when field thresholds are exceeded. It features a fast response time (20 µs) and a 30 kHz bandwidth with a built-in RC filter. Its compact design, AC/DC capability, and easy mounting make it ideal for energy-efficient and safe current monitoring systems. Pololu 5352