New products
New products New products
zł259.00
Delivery date unknown
Available
zł50.18
24h
Available
Slamtec Mapper M1M1 ToF Laser Scanner Kit
ID: 577118
5902186314238
zł3,403.67
Tax included
zł2,767.21 tax excl.
A set of LIDAR laser scanner and data processing unit. It allows you to create maps of areas up to 100 000 m². Range up to 20 m and resolution up to 5 cm. It has a built-in inertial 9-DOF navigation system. Seeed Studio 114991984
Description
Slamtec Mapper is an extended set with LIDAR sensor from SLAMTEC. It consists of two key elements: a LIDAR laser scanner and a data processing unit. The processing unit has a built-in simultaneous location and mapping algorithm (SLAM), making it an excellent solution for such projects as robot navigation and positioning or environment mapping.
Slamtec Mapper allows you to easily and quickly create maps of areas up to 100 000 m². With a range of up to 20 m and a resolution of up to 5 cm, it is one of the most accurate products of this type on the market. The built-in inertial 9-DOF navigation system guarantees correct map creation even when the module is tilted relative to the ground.
Communication with the set is via a WiFi or Ethernet interface. The implementation process is greatly facilitated by the cross-platform SDK and tools for mobile devices and PCs provided by the manufacturer. The set also has support for ROS (Robot Operating System).
Block diagram
Features
- Large Scenarios and High-quality Mapping
- Tilting Compensation and fast Moving
- Indoor and Outdoor Availability
- Fully Compatible with ROS, Easy Data Analysis
- Distance Range 20m
- Sample Rate 7000 Hz
- Maximum Area 300m * 300m
- Mapping resolution 0.05m
- Maximum moving speed 1 m/s
- Accuracy < 0.02m
- Graph Optimizing Working Time About 1hr
- Maximum Inclination Angle ±3°
- Frequency of data refresh 8 Hz
- Power 5 V DC
- Demensions: 104 x 60 x 66 mm
Example using
577118
Data sheet
- Interface
- Ethernet/WiFi
- Type of sensor
- Laser
- Minimum distance
- 0 cm
- Maximum distance
- 20 m
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
360-degree laser scanner (LIDAR), with a range of up to 12 meters and measurement frequency up to 10 Hz (optimal value 5.5 Hz). DFRobot DFR0315
zł554.63
24h
Available quantity: 6
Available
RPLIDAR A2M8 R4 (LIDAR) laser scanner 360 degrees, 10 Hz, 4000 measurements / second, range up to 12 m, measurement error at the level of 0.1%, safe for eyesight. DFRobot DFR0445
zł1,124.63
24h
Available quantity: 1
Available
Laser scanner (Lidar) 360 degrees with a measurement frequency of 10 Hz and 8000 measurements / second. It reaches a range of up to 12 m and a measurement error of 1%. Sparkfun SEN14756
zł3,210.12
24h
Available quantity: 1
Available
TF Mini LiDAR is a one-way rangefinder that is based on ToF (Time of Flight) technology. It consists of high quality optical and electrical devices that provide stability, high sensitivity and precision. Sparkfun SEN-14786
zł321.17
Delivery date unknown
No product available!
Laser scanner (Lidar) 360 degrees with a measurement frequency of 10 Hz and 16,000 measurements / second. Range up to 25m, measuring error at 1%. Sparkfun SEN-15045
zł4,644.65
Delivery date unknown
No product available!
Other products in the same category (16)
Extension board with distance sensor ToF VL53L1, The sensor has a range of up to 400 cm. The kit includes 2 modules with sensors that can be connected via a 10-pin connector. The shield is compatible with STM32 Nucleo boards and has an Arduino UNO R3 connector. STMicroelectronics X-NUCLEO-53L1A2
zł202.48
24h
Available quantity: 1
Available
Module with an integrated proximity and ambient light sensor based on the VCNL4040 system. It can detect obstacles in the range of 0 to 20 cm. It communicates via the I2C bus. Adafruit 4161
zł33.90
24h
Available quantity: 3
Available
Module with ToF VL53L5CX sensor with a matrix of 64 pixels and a range of up to 4 m. It is equipped with a Qwiic connector and communicates via the I2C interface. SparkFun SEN-18642
zł170.32
3 weeks
No product available!
Ultrasonic distance sensor module with a range of up to 4.5m enclosed in a waterproof and dustproof housing. It is compatible with 3.3V or 5V devices such as Arduino, Raspberry Pi DFRobot SEN0311
zł84.54
24h
Available quantity: 10
Available
Ultrasonic distance sensor MB1000 with a range from 0 to 645 cm. It has an output in the form of a serial interface, an analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 723
zł281.39
24h
Available quantity: 5
Available
Module with a digital distance sensor with a range of up to 200 cm. It has a digital output that goes low when an object is detected. Pololu 4077
zł112.26
24h
Available quantity: 2
Available
ToF distance sensor module based on the VL53L1X system. It offers a range from 4 to 400 cm and communicates via the I2C interface. TOF400C
zł49.20
24h
Available quantity: 10
Available
The set consists of the STM32 NUCLEO-F401RE board with the STM32F401RE microcontroller and the X-NUCLEO-6180A1 board with the VL6180 distance sensors operating in ToF technology. STMicroelectronics P-NUCLEO-6180A1
zł271.90
24h
Available quantity: 2
Available
ST Microelectronics\' compact Time-of-Flight (TOF) sensor uses a 940 nm laser to precisely measure distances from 1 mm to 1.2 m with a resolution of 1 mm. It supports an I²C interface, has an XSHUT input for shutdown and a GPIO1 output for object detection, and is compatible with voltages from 2.6 to 5.5 V thanks to a built-in regulator and logic level converter. Pololu 3692
zł65.46
24h
Available quantity: 2
Available
Ultrasonic obstacle sensor (vehicles) with high resolution and range up to 500cm with USB interface. It allows you to perform measurements at 4Hz. DFRobot SEN0268
zł674.19
4 weeks
No product available!
A miniature lidar distance sensor that detects objects up to 100 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (100 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5483
zł94.27
4 weeks
No product available!
Expansion board equipped with VL6180 distance sensor, based on FlightSense technology. The set is designed to measure distances and detect gestures. X-NUCLEO-6180A1
zł167.43
24h
Available quantity: 1
Available
Laser distance sensor with a measuring range from 3 cm to 400 cm based on the ToF measurement technique. Communication with the module takes place via the I2C interface. Adafruit 3967
zł78.31
4 weeks
No product available!
Module with a digital distance sensor with a range of up to 50 cm. It has a digital output that goes low when an object is detected. Pololu 4067
zł112.26
24h
Available quantity: 2
Available
Ultrasonic distance sensor with a range of up to 15m. Powered with the voltage from 9 to 24 V, it communicates via the RS485 interface. DFRobot SEN0310
zł966.85
4 weeks
No product available!
Module with an obstacle sensor operating in the infrared band. Equipped with an XH2.54 connector, it has a digital output informing about the detection of an obstacle
zł14.39
24h
Available quantity: 6
Available
A set of LIDAR laser scanner and data processing unit. It allows you to create maps of areas up to 100 000 m². Range up to 20 m and resolution up to 5 cm. It has a built-in inertial 9-DOF navigation system. Seeed Studio 114991984