Dual TB9051FTG Motor Driver - dual DC motor driver for Raspberry Pi
ID: 572196
5906623478743
zł155.91
Tax included
zł126.76 tax excl.
Dual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Pololu 2762
Description
Universal dual DC motor controller designed for Raspberry Pi . The controller can be used for motors supplied with voltage in the range of 4.5-28 V and power consumption in continuous operation of 2.6 A (5 A in peak) of two DC motors. The controller is protected by overheating and overcurrent and has reverse voltage protection. The motors are controlled using a PWM signal with a frequency up to 20 kHz.
properties
- Two single H-bridges (TB9051FTG chip)
- Supply voltage for motors: 4.5-28 V
- Maximum power consumption: 2.6 A (5 A at peak)
- PWM signal frequency up to 20 kHz
- Protection against overheating and system overload
- Reverse protection circuit
- The automatic step-stop mode prevents the system from overheating during sudden braking
- Dimensions: 65 x 56 mm
- Weight: 28 g
Included
- Dual Extension TB9051FTG Motor Driver for Raspberry Pi
- 4 distances M2,5 (length 11 mm), 4 screws and 4 nuts
572196
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. Pololu 3119
zł245.34
24h
Available quantity: 1
Available
This compact breakout board for Maxim’s MAX14870 motor driver offers a wide operating voltage range of 4.5 V to 36 V and can deliver a continuous 1.7 A (2.5 A peak) to a single brushed DC motor. It features a simple two-pin speed/direction interface and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature.
zł42.46
24h
Available quantity: 2
Available
TB9051FTG Single Brushed The DC Motor Driver Carrier is a single DC motor driver that allows the motor to be supplied with voltage in the 4.5 ... 28V range and power consumption at a continuous 2.6 A (5A peak) operation. Pololu 2997
zł47.04
24h
Available quantity: 1
Available
Dual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Self-assembly set. Pololu 2761
zł134.54
24h
Available quantity: 1
Available
Other products in the same category (16)
The official extension module (HAT) dedicated to the Raspberry Pi. It allows you to control LEGO SPIKE Prime motors and service LEGO sensors. Raspberry Pi SC0622
zł183.42
1 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5058
zł431.43
4 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5057
zł459.97
4 weeks
No product available!
Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit (Adafruit 2327)
zł90.38
24h
Available quantity: 3
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board without connectors. Pololu 5053
zł305.06
4 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5054
zł635.79
4 weeks
No product available!
Extension module with a driver for two stepper motors based on the DRV8825 system. Dedicated for Raspberry Pi minicomputers. Waveshare Stepper Motor HAT
zł111.67
4 weeks
No product available!
The Bus Servo Driver HAT (A) with the ESP32-WROOM-32 microcontroller enables simultaneous control of up to 253 ST and RSBL servos, supporting both wired and wireless communication in robotic applications. Designed for integration with Raspberry Pi, it features 5 V power supply from a converter and full support for UART and USB-C transmission. JSON command handling and automatic WiFi network startup allow for remote control and easy integration with various development environments. Ideal for robotic arm projects, walking robots, and other constructions requiring multiple servos with closed-loop control.
zł81.03
24h
Available quantity: 1
Available
This add-on board makes it easy to control two high-power DC motors with a Raspberry Pi. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 36 Voperating range and are efficient enough to deliver a continuous 14 A without a heat sink. The drivers offer basic current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation.
zł315.67
24h
Available quantity: 2
Available
HAT module with TB6612FNG motor driver and PCA9685 PWM driver designed for Raspberry Pi minicomputers. The board is equipped with a 40-pin connector. Adafruit 4280
zł133.02
24h
Available quantity: 1
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5055
zł605.06
4 weeks
No product available!
Motor driver module for Raspberry Pi that allows simultaneous control of servos, DC and stepper motors using I2C interface, with additional UART support for external communication. With a built-in DC-DC regulator, it can power Raspberry Pi with up to 3A current, while its stackable design and spare DIP headers for camera and display increase design flexibility. The module is ideal for robotic projects, offering independent power supply for servos, adjustable PWM, and additional features such as buzzer and IR receiver. DFRobot DRI0054
zł131.46
4 weeks
No product available!
DC motor driver that allows you to control the movement of three drives using the I2C interface. Connectors for self-assembly. Pololu 5034
zł210.27
24h
Available quantity: 1
Available
Dual MAX14870 Motor Driver is a dual DC driver compatible with Raspberry Pi that allows you to control two DC motors with 4.5-36V continuous current of 1.7A. Pololu 3759
zł143.97
24h
Available quantity: 1
Available
Raspberry Pi Expansion Board, DC Motor / Stepper Motor Driver
zł115.66
24h
Available quantity: 2
Available
The core of a small robot, either as an auxiliary controller atop a Raspberry Pi base or as a complete control solution on its own. Its Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader. This version does not include any through-hole components or connectors, allowing for customized assembly or standalone use. Pololu 3118
zł197.60
24h
Available quantity: 2
Available
Dual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Pololu 2762