Thing Plus - WiFi/Bluetooth module with ESP32 WROOM

Espressif ESP32-S3 WiFi module board with 32-bit dual-core Xtensa 32-bit LX7 processor. It offers 4 MB Flash memory and 512 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-S3-Zero-M

Espressif ESP32-C3 WiFi module board with RISC-V core. It offers 4 MB Flash memory and 400 kB SRAM and an RGB LED. It has a built-in ceramic WiFi/BLE antenna. Waveshare ESP32-C3-Zero-M

Development board with ESP32 module (WiFi + Bluetooth). Equipped with a 40-pin connector compatible with Raspberry Pi HAT. Waveshare ESP32 One

Development board with WiFi and Bluetooth ESP32 module. It is equipped with an IPS 1.14" LCD display, a USB-UART converter and a Li-Ion battery charging system. ModESPttgo1.14"

Development board with WiFi / Bluetooth Espressif ESP32-WROVER module. The board is equipped with numerous peripheral systems, eg SD card slot, audio codec, a series of LEDs controlled by one line and a 9-axis IMU system. TTGO TAudio V1.5 ESP32-WROVER

Espressif ESP32 is an integrated circuit that combines Wi-Fi functionality and Bluetooth 4.0 BLE. Integrated 32-bit, dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be powered by 2.2V-3.6V. The system has a housing QFN48 (6x6mm). ESP32 Chip

Evaluation kit with WiFi/Bluetooth module BLE ESP32-WROOM-32U. The board is equipped with a USB-UART converter, which through the microUSB connector allows you to power and program the board. Espressif ESP32-DevKitC-32U

Development kit from the M5Stack series equipped with the ESP32-S3 module. It will work well in projects related to IoT or in "wearable" devices. M5 Stack C124

A device with modifiable functionality that works under the control of the NodeMCU ESP32 system. It combines two wireless technologies: Bluetooth 4.1 and WiFi. iNode MCU USB

The ESP32 WiFi and Bluetooth module has a dual-core 32-bit MCU that integrates WiFi HT40 and Bluetooth / BLE 4.2 technology. Designed for mobile devices and Internet of Things (IoT) applications. DFRobot TEL0111

Pmod ESP32 is a module with the ESP-WROOM-32 system, allowing for WiFi communication, Bluetooth BLE 4.0 and Bluetooth. For communication, the SPI or UART interface is used (selected by means of the slide switch), which were output on the 12-pin Pmod connector. Digilent 410-377

Development board with ESP32-C6 Mini-1 module from Espressif. It supports WiFi 6, Bluetooth® 5.3, Zigbee and Thread (802.15.4) protocol and offers various interface options including SPI, UART, LPUART, I2C, I2S, PWM LED controller, USB Serial/JTAG, ADC. Dedicated to IoT applications and battery-powered devices. SparkFun DEV-22925

Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM. It is equipped with a USB type C connector and a WiFi/BT antenna. Seeed Studio 113991054

Module with 9-axis IMU LSM9DS1 system dedicated to ESP Thing board. Equipped with a connector for connecting GPS and a microSD slot. SparkFun DEV-14430

The SparkFun ESP32 Thing Power Control Shield enables the ESP32 Thing to switch up to 5A of a DC load, providing a wide variety of options to control your next project! With a default voltage range of 5–28VDC, power can be connected to this shield in one of two ways. DEV-14155

Expansion module with a DAC/ADC converter and a camera dedicated to FireBeetle ESP32. It allows you to create versatile IoT applications. DFRobot DFR0498