HC-12 - 433MHz radio module
ID: 581925
5906623474011
zł23.90
Tax included
zł19.43 tax excl.
Multi-channel wireless data transmission module operating at 433 MHz. It is supplied with the voltage ranging from 3.2 V to 5.5 V and communicates via the UART interface
Description
The HC-12 module is a multi-channel wireless data transmission module. It can operate in the frequency band from 433.4 to 473.0 MHz on one of the 100 available channels with a 400 kHz step. The maximum transmitting power of the module is 100 mW (20 dBm), and the receiving sensitivity is -117 dBm at a transmission speed of 5000 bps in the air. The module can transfer data up to 1000 m in open space. There is a pin and a u.FL connector on the board for connecting an external antenna. The module is supplied with the voltage ranging from 3.2 V to 5.5 V and communicates via the UART interface.
Features
- Operating frequency range: 433.4 MHz to 473 MHz
- 100 channels (400 kHz step)
- Output power: 100 mW (20 dB)
- Interface: UART
- The pin for soldering the antenna
- U.FL connector for connecting an external antenna
- Transmission range: 1m to 1000m (below 1 meter, may not work properly)
- Supply voltage: 3.2 V to 5.5 V
- Current consumption in standby mode: 16 mA
- Module dimensions: 27.8 x 14.4 x 4 mm
Kit contains
- SI4463 HC-12 radio module
- Antenna
581925
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 3257
Available
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 145
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
24h
Available quantity: 111
Available
A set of 10 pieces of female-female connecting cables with a length of 21 cm. CAB_F-F (BK-10-25)
zł5.84
24h
Available quantity: 64
Available
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
zł4.90
24h
Available quantity: 79
Available
Other products in the same category (16)
WIFI-LPT100 Eval Kit module enables UART data transmission via WiFi, ultra low power consumption, encrypted communication
zł110.76
4 weeks
No product available!
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
zł110.65
24h
Available quantity: 1
Available
2.4 GHz RF module with nRF24L01+ chip. The module has an RP-SMA connector with reverse polarity, allowing the connection of an external antenna. The system has a built-in 3.3 V stabilizer and IO lines with a tolerance of 5 V. SparkFun WRL-00705
zł155.41
3 weeks
No product available!
Module with 2.4 GHz transceiver system (transmitter and receiver) LT892. It is powered with the voltage of 3.3 V and has a built-in antenna
zł5.67
24h
Available quantity: 9
Available
A wireless transceiver operating in the 434 MHz band based on the RFM69HCW system. Maximum power: 100mW; bit rate up to 300kbps. Range in the open space reaches up to 500m. The module communicates using the SPI bus. Compatible with Arduino
zł14.24
4 weeks
No product available!
Radio transmitter module operating at 433 MHz. It is equipped with Gravity connectors and communicates via a digital interface. DFRobot TEL0140
zł30.55
24h
Available quantity: 3
Available
The ISM radio module in the DIP housing. It operates on the 868 MHz frequency. The module complies with FCC, ETSI regulations. HOPE MICROELECTRONICS RFM12B-868DP
zł16.58
1 weeks
No product available!
Expansion board for STM32 Nucleo based on S2-LP RF transmitter operating in 868MHz band. The expansion board is compatible with ST morpho and Arduino UNO R3 connectors. STMicroelectronics X-NUCLEO-S2868A2
zł161.81
24h
Available quantity: 2
Available
The FS1000A transmitter and the MX-RM-5V receiver enable communication in the ISM band; they are easy to use, do not require advanced bus control and have very small dimensions. Especially recommended for work with Arduino and STM32
zł5.63
24h
Available quantity: 26
Available
HAT module with RFM95W 868 MHz system for LoRa/LoRaWAN communication and OLED display, designed for Raspberry Pi minicomputers. Adafruit 4074
zł197.59
24h
Available quantity: 1
Available
Wireless switch operating at 433 MHz frequency. It does not require a power supply. DFRobot TEL0146
zł44.65
24h
Available quantity: 2
Available
NRF24L01 module with USB type A connector. It has a built-in antenna and a USB converter. Allows you to design and test 2.4 GHz radio communications using a PC
zł45.25
24h
Available quantity: 3
Available
SYN115/SYN480R set enables the implementation of 433 MHz wireless communication in DIY projects and microcontroller systems. It is suitable for applications in remote control systems, home automation, and data transmission between devices.
zł6.32
24h
Available quantity: 4
Available
Available
The modRemProg remote control operating at 433 MHz enables cloning of fixed-code remote signals, supporting up to four devices. It is suitable for controlling gates, doors, and alarm systems, offering a simple programming procedure and a compact, durable design.
zł13.90
4 weeks
No product available!
Available
Multi-channel wireless data transmission module operating at 433 MHz. It is supplied with the voltage ranging from 3.2 V to 5.5 V and communicates via the UART interface