3-axis magnetometer module BMM150 - Waveshare 24657
ID: 1185239
5906623423682
zł29.56
Tax included
zł24.03 tax excl.
Module with a 3-axis magnetometer based on the BMM150 chip. It communicates via an I2C or SPI interface. Waveshare BMM150 3-Axis Magnetometer Sensor
Description
The BMM150 3-axis magnetometer module, which allows magnetic field measurements of ±1300 μT (x- and y-axis) and ±2500 μT (z-axis) with a resolution of 0.3 μT. Based on Bosch's proprietary FlipCore technology, it provides absolute orientation information with high measurement accuracy. Thanks to its small size, it is particularly suitable for course determination in drones. The module communicates via an I2C or SPI interface and is powered by 3.3 V or 5 V. Full documentation of the module with examples of use is available on the product page.
Features
- Measurement range: ± 1300 μT (x, y axis), ± 2500 μT (z axis)
- Resolution: 0.3 μT
- Accuracy: 30 μT
- I2C or SPI interface
- Programmable interrupt
- Zero-B offset: ±40μT/±2μT
- Supply voltage: 3.3 V or 5 V
- Current consumption: up to 500 uA
- Dimensions: 29 x 2 mm
Kit contains
- BMM150 3-Axis Magnetometer Sensor
- PH2.0 5-pin connector
1185239
Data sheet
- Interface
- SPI/I2C
- Type of sensor
- BMM150
- Power supply voltage
- 3,3 V/5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
NUCLEO series starter kit equipped with STM32G474RE microcontroller (512 kB Flash, Cortex-M4), with built-in programmer-debugger ST-Link-V3E, equipped with connectors compatible with Arduino.
zł97.56
Delivery date unknown
No product available!
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
Other products in the same category (16)
Module with TLV493D 3-axis magnetic field sensor. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4366
zł35.17
4 weeks
No product available!
KAmodMAG3110FC is a module with magnetic field sensor MAG3110FC from NXP. The sensor measures the magnetic field in the range of ±1000μT, with a resolution of 0.1μT. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMAG3110FC
zł24.90
24h
Available quantity: 335
Available
The GY‑271 module with HMC5883L sensor is a precise digital compass offering three-axis magnetic field measurement, I²C communication, and 3 V–5 V operation. Suitable for robotics, navigation, and embedded systems requiring low power consumption and a compact form factor. GY‑271
zł9.70
4 weeks
No product available!
Module with 3-axis digital compass, HMC5983, I2C, SPI, RoHS
zł69.90
24h
Available quantity: 1
Available
Module with a 3-axis magnetometer based on the BMM150 system. It communicates via the I2C or SPI interface. DFRobot SEN0419
zł30.52
24h
Available quantity: 2
Available
Module with 3-axis magnetometer MAG3110, I2C, RoHS
zł54.58
24h
Available quantity: 3
Available
A sensitive sensor of the magnetic field, operating in the range of ± 50 microtesels, which generates a rectangular signal proportional to the strength of the field, which facilitates its integration with microcontrollers. It is distinguished by high temperature stability and tenderness, which makes it ideal for precise magnetic field measurements in applications requiring reliability. Sparkfun Sen-25531
zł351.76
3 weeks
No product available!
Module with a 3-axis magnetometer based on the MLX90393 system. It has a measuring range from ± 5mT to ± 50mT and a resolution of 0.161 µT. The I2C or SPI interface is used for communication. Adafruit 4022
zł54.75
24h
Available quantity: 1
Available
Advanced electronic compass module that precisely calculates direction to within a few degrees, and its tilt compensation allows operation in difficult environmental conditions. The module is easy to use and allows to obtain measurement data via I2C interface at 5 Hz. SparkFun SEN-12916
zł1,774.52
3 weeks
No product available!
Precise, 3-axis geomagnetic sensor based on FlipCore and TMR technology, offering high interference immunity and a wide measurement range of ±2000μT with a resolution of 0.1μT. Thanks to its high sampling rate (up to 400Hz) and resistance to magnetic shocks, it is ideal for AR/VR systems, AGV navigation and drone control. DFRobot SEN0622
zł30.91
24h
Available quantity: 8
Available
The Zeenko near-field probe set based on a 4-layer PCB enables precise detection of EMI sources in electronic circuits. When used with spectrum analyzers such as tinySA ULTRA, it provides effective electromagnetic diagnostics without the need for external amplifiers. An ideal solution for analyzing and eliminating interference in electronic systems.
zł45.21
24h
Available quantity: 8
Available
A module with a magnet sensor that allows you to detect the presence of an object emitting a magnetic field in the environment. The module is supplied with the voltage ranging from 3.3 V to 5 V and has a digital output. DFrobot DFR0033
zł13.74
24h
Available quantity: 1
Available
Module with a 3-axis magnetometer BMM150. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020492
zł53.46
4 weeks
No product available!
HMC5883L digital electronic compass 3-axis magnetoresistive sensor module with level converter, RoHS
zł12.87
24h
Available quantity: 2
Available
A small module with a 3-axis magnetometer based on the Melexis MLX90393 system. Its resolution is 0.161 μT. I2C or SPI interface is used for communication. The I2C interface has been derived on connectors compatible with the Qwiic standard. SparkFun SEN-14571
zł97.92
24h
Available quantity: 1
Available
A module with a 3-axis magnetometer based on the BMM150 chip. It communicates via an I2C interface. DFRobot SEN0529
zł40.47
4 weeks
No product available!
Module with a 3-axis magnetometer based on the BMM150 chip. It communicates via an I2C or SPI interface. Waveshare BMM150 3-Axis Magnetometer Sensor