DFRobot Gravity IoT starter kit for micro:bit
ID: 573808
5906623405985
zł367.36
Tax included
zł298.67 tax excl.
Starter kit for IoT projects with micro:bit modules. It contains a micro: bit plate and 7 modules with sensors, executive elements useful in projects related to the Internet of Things. DFRobot KIT0138
Description
Starter kit for IoT projects with a micro:bit module. It contains a micro:bit plate and 7 modules with sensors, executive elements useful in projects related to the Internet of Things. The kit can be easily configured in the MakeCode editor to get a WiFi connection. The manufacturer has also developed a free EasyIoT platform that allows subscribers to exchange and visualize data.
The starter kit is compatible with the DFRobot Gravity modules, offering endless possibilities of IoT applications.
Features
- ARM Cortex-M0 32-bit processor
- Flash memory with a capacity of 256 kB
- RAM memory with a capacity of 16 kB
- 5x5 LED matrix template
- Two buttons with programmable functions
- Built-in light, temperature and accelerometer sensors
- Low Energy Bluetooth antenna
- Three ports that can be used as digital / analogue inputs / outputs
- 20-pin edge connector
- MicroUSB port
- Connection for connecting the JST-PH Battery
- Reset button and status LED
- WIFi Obloq module:
- Built-in 32-bit low-power processor: it can be used as an application processor
- Built-in protocol: TCP/IP stack
- Encryption type: WPA WPA2/WPA2-PSK
- Supports connections to standard MQTT protocols and TTL serial ports with wireless applications
- Transmission speed: 9600 bps
- Wireless frequency: 2.4 GHz
- Interface type: Gravity UART 4PIN
- Wireless mode: IEEE802.11b/g/n
- SRAM: 160 KB
- External FLASH memory: 4 MB
- Additional modules (sensors, actuators):
- Micro:Mate - expansion module for micro:bit
- Analog capacitive soil humidity sensor
- Waterproof DS18B20 sensor kit
- Digital PIR sensor (Motion)
- Digital relay module 5A
- Digital speaker module
- Analog sound sensor for Arduino
- Mini servomechanism 9g
- Power supply: MicroUSB (5 V)
- Operating voltage: 5 V
- Maximum current: 1500 mA
- Working temperature: 0 ... 60 ?
- The size of the box: 250 x 190 x 57 mm
- Weight: 492 g
Included
- User's guide
- Educational module micro:bit
- Micro:Mate Expansion Board
- Wi-Fi module Obloq
- Analog capacitive soil humidity sensor
- Waterproof DS18B20 sensor kit
- Digital PIR motion sensor
- Digital relay module 5A
- Digital speaker module
- Analog sound sensor for Arduino
- Mini servomechanism 9g
573808
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Earth humidity sensor with analogue output, supplied with 3.3 to 5.5 V voltage with Gravity connector. DFRobot SEN0193
zł27.72
24h
Available quantity: 2
Available
IoT DFRobot Gravity UART OBLOQ module for working with Microsoft Azure. DFRobot TEL0118
zł55.76
24h
Available quantity: 2
Available
Module with 5 A 250 VAC relay. DFRobot DFR0017
zł12.71
24h
Available quantity: 3
Available
PIR motion sensor module for Arduino and Raspberry Pi. DFRobot SEN0018
zł19.84
24h
Available quantity: 3
Available
Micro:Mate is an expansion board for the micro: bit development module. It provides six 3-pin connectors with I/O outputs, a 3.5mm audio jack connector and is powered from a 5V microUSB connector. DFRobot DFR0518
zł30.90
Delivery date unknown
No product available!
Gravity: DS18B20 Temperature Sensor is a module with a temperature sensor compatible with Arduino boards. The module can be supplied with 3.3-5V voltage and measures the temperature in the range -55 ~ 125 ° C. DFRobot DFR0024
zł28.19
24h
Available quantity: 5
Available
Gravity: Analog Sound Sensor is a sound sensor with Gravity analogue output. The module can be supplied with 3.3 ... 5V voltage. DFRobot DFR0034
zł21.41
24h
Available quantity: 4
Available
Other products in the same category (16)
Base board for dipPLD modules with XC2C256 (CoolRunner-II by Xilinx)
zł159.00
24h
Available quantity: 29
Available
Available
Development board with Bluetooth 5.2 BGM220P module from Silicon Labs. It is equipped with a mikroBUS socket and a Qwiic connector and a 20-pin connector with peripherals such as I2C, SPI, UART and GPIO. SparkFun DEV-17588
zł132.48
3 weeks
No product available!
Evaluation kit with LittleBee GW1NR9 FPGA. It offers 8640 LUTs, 6480 Flip-Flops (FF), and has a built-in 8MB (64Mb) SDRAM. The board has 8 MB Flash, FTDI for UART, 8 LEDs and a button. TEC0117-01
zł311.95
4 weeks
No product available!
Evaluation platform with a DLP projector for a wide range of industrial applications such as 3D scanning, 3D printing and Automated Optical Inspection (AOI). EKB DPM-E4750RGBHBLC
zł13,009.02
6 weeks
No product available!
ESP32-DEVKITS-R is an advanced development board based on the ESP32 chip, integrating Wi-Fi and Bluetooth functions. Ideal for IoT applications, it offers support for various interfaces and GPIO outputs, making it easy to connect peripherals.
zł57.56
24h
Available quantity: 1
Available
Available
Silicone case for the UNIHIKER computer. Provides a comfortable grip and good protection, reducing the likelihood of accidental drops and screen damage. DFRobot FIT0936
zł29.90
24h
Available quantity: 5
Available
Love to Code Chibi Clip Mounting Accessory
zł79.03
24h
Available quantity: 1
Available
Chibitronics Circuit Stickers Effects Add-On Pack
zł163.04
24h
Available quantity: 1
Available
Advanced evaluation board designed for rapid implementation of embedded solutions. Supporting the embOS operating system and SEGGER tools such as emFile, emWin, emUSB and emNet, the board is an ideal platform for software testing and application development in an environment based on the Xilinx Zynq XC7Z007S SoC with ARM Cortex-A9 processor and Artix7 FPGA. Segger emPower Zynq (6.31.00)
zł512.87
1 weeks
No product available!
Silicone case for the UNIHIKER computer. Provides a comfortable grip and good protection, reducing the likelihood of accidental drops and screen damage. DFRobot FIT0937
zł29.90
24h
Available quantity: 5
Available
Evaluation platform with a DLP projector for a wide range of industrial applications such as 3D scanning, 3D printing and Automated Optical Inspection (AOI). EKB DPM-E4750RGBLC
zł9,527.15
6 weeks
No product available!
Love to Code Chibi Scope Display Accessory
zł270.55
24h
Available quantity: 2
Available
The EBB SB2209 CAN V1.0 (RP2040) is a compact extruder board featuring an RP2040 microcontroller and TMC2209 stepper driver, ensuring quiet and reliable motor operation via the CAN bus. Equipped with MAX31865 and ADXL345 sensors, support for BLTouch/Voron Tap, PH2.0 connectors, and fan ports with selectable voltage, it is an ideal solution for modern 3D printer toolheads.
zł136.52
24h
Available quantity: 10
Available
Love To Code Chibi Chip is an educational module for learning programming designed for beginners of all ages and levels who want to start learning programming without installing software. DEV-14591, Adafruit 3674
Regular pricezł212.57zł139.00
24h
Available quantity: 3
Available
Starter kit for IoT projects with micro:bit modules. It contains a micro: bit plate and 7 modules with sensors, executive elements useful in projects related to the Internet of Things. DFRobot KIT0138