zł100.13 tax excl.
Multi-functional environmental sensor consisting of SHTC3 temperature and humidity sensor, BMP280 pressure sensor, VEML7700 ambient light sensor and ML8511 UV sensor. DFRobot SEN0500
Multi-functional environmental sensor consisting of SHTC3 temperature and humidity sensor, BMP280 pressure sensor, VEML7700 ambient light sensor and ML8511 UV sensor. The module has a built-in microcontroller that converts raw data from chips to values in commonly used units (℃ and ° F for temperature,% for humidity, kPa for atmospheric pressure, lx for illuminance and mw / m² for UV light). The user has two communication interfaces (UART and I2C) and complete Arduino and Python libraries at his disposal.
The BMP280 is a pressure and temperature sensor. It allows you to read the atmospheric pressure in the range from 300 to 1100 hPa with an accuracy of ± 1 hPa and the temperature in the range from -40 to 85 ℃ with an accuracy of ± 1 ° C. It is an ideal solution for home temperature measurements as well as for measuring altitude when flying at high altitudes.
The SHTC3 from Sensirion is a digital temperature and humidity sensor. It is characterized by high reliability and stability with low energy consumption, fast response and resistance to interference. It offers a high accuracy of ± 2% RH and ± 0.2 ° C.
ML8511 is a UV light sensor. Enables the measurement of the intensity of UV radiation. It is equipped with an internal amplifier. The module can measure the intensity for both the UV-A (320 - 400nm) and the UV-B (280 - 320nm) waves. It generates an analog voltage at its output that is linearly related to the measured intensity of UV radiation.
The VEML7700 is a light intensity sensor. It has a large measuring range (0-120Klx) and an accuracy of 0.0036 lx / ct.
The high accuracy and small size of the module make it suitable for indoor and outdoor environmental monitoring systems. Full documentation with examples of use is available on the product page.
BMP280
SHTC3
ML8511
VEML7700
General
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Gravity: Analog TDS Sensor / Meter is an analog water purity measurement module. It is powered by 3.3 ... 5.5V voltage and has an analogue output interface. Module compatible with Arduino. DFRobot SEN0244
No product available!
Air quality sensor module based on the SGP40 system. It communicates via the I2C interface. DFRobot SEN0392
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
No product available!
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
Module with PM2.5 dust sensor. The board is equipped with a Gravity connector and communicates via the I2C interface. DFRobot SEN0460
Module with digital barometer BMP388. The system measures pressure in the range from 300 to 1250 hPa and temperature from -40 ℃ to 80 ℃. DFRobot SEN0251
Module with temperature, humidity and pressure sensor BME680 from Bosch. The module communicates via I2C or SPI interfaces.
No product available!
Miniature pressure measurement module equipped with a 25 psi piezoresistive pressure sensor. It allows you to perform calibrated and compensated pressure measurements from 60 mbar to 2.5 bar. SparkFun SEN-16476
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
Module with sensors of environmental parameters. It allows you to measure temperature, humidity and pressure as well as CO2 and VOC concentration. DFRobot SEN0335
Module with BME680 sensor for measuring environmental conditions such as concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-16466
Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C (Qwiic). SparkFun SEN-15440
Module with a pressure sensor DPS310 with high measurement accuracy. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020812
No product available!
Kit with MPX5700AP pressure sensor, syringe and tube. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 110020248
No product available!
Module with a pressure sensor with high accuracy HP206C. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020068
Module with a BME680 sensor that allows you to measure temperature, humidity, pressure and gas detection. The board is equipped with a Grove connector and communicates via I2C and SPI. Seeed Studio 101020513
No product available!
Module with BME680 sensor for measuring the concentration of volatile organic compounds (VOC), pressure, temperature and humidity. I2C or SPI communication. DFRobot SEN0375
Integrated BME688 gas, pressure, temperature and humidity sensor in one MEMS housing. The system can be supplied with the voltage of 3.3 V and is equipped with an I2C communication interface. BME688 Breakout Board
No product available!
Module with pressure and temperature sensor BMP280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM411
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM472
Module with BME680 sensor to measure the concentration of volatile organic compounds, pressure, temperature and humidity. It communicates via the I2C interface. Pimoroni PIM357
Multi-functional environmental sensor consisting of SHTC3 temperature and humidity sensor, BMP280 pressure sensor, VEML7700 ambient light sensor and ML8511 UV sensor. DFRobot SEN0500