BMP388 Barometric Pressure Sensor - module with BMP388 pressure sensor
ID: 1180829
zł79.37
Tax included
zł64.53 tax excl.
Module with digital barometer BMP388. It enables pressure measurement in the range from 300 to 1250 hPa and communicates via I2C or SPI. Waveshare BMP388 Barometric Pressure Sensor
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with digital barometer BMP388. It enables pressure measurement in the range from 300 to 1250 hPa with an accuracy of ± 8 Pa, which in relation to height gives an accuracy of 0.5 m. The system also allows temperature measurement in the range from -40 ℃ to 80 ℃. The BMP388 uses Bosch's piezo resistive pressure sensor technology with high accuracy, low power consumption and high resistance to electromagnetic interference. it can work with systems with a working voltage of 3.3 V or 5 V, and communication is via the I2C interface or SPI. Full documentation with examples is available on the product page.
Features
- Pressure measurement range: 300 to 1250 hPa
- Relative accuracy: ± 8 Pa (± 0.5 m at 700-900 hPa, 25 ℃ -40 ℃)
- Absolute accuracy: ± 50 Pa (0 ℃ -65 ℃ at 300-1100 hPa）
- Temperature coefficient: ± 0.75 Pa / K (-20 ℃ -65 ℃ at 700-1100 hPa)
- Temperature measurement range: -40 ℃ to 80 ℃
- Absolute accuracy of temperature measurement: ± 0.5 ℃ (at 0 ℃ -65 ℃）
- Interface: I2C or SPI
- Voltage: 3.3V or 5V
- Dimensions: 32 x 20 mm
Kit contains
- BMP388 Barometric Pressure Sensor module
- JST PH2.0 5-pin cable
1180829
Data sheet
- Interface
- SPI/I2C
- Type of sensor
- BMP388
- Power supply voltage
- 3,3 - 5 V
- Sensor type
- Ciśnienia atmosferycznego
You might also like
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.90
24h
Available quantity: 1356
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.34
24h
Available quantity: 68
Available
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.72
24h
Available quantity: 214
Available
Other products in the same category (16)
The MS5803-14BA waterproof pressure sensor module. It allows measurement from 0 to 14 bar and communicates via SPI or I2C interface. SparkFun SEN-12909
zł299.00
6 weeks
No product available!
Module with pressure and temperature sensor BMP280. It allows you to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C or SPI interface. Adafruit 2651
zł56.17
24h
Available quantity: 1
Available
Pressure sensor module with I2C interface (BMP085)
zł74.90
24h
Available quantity: 6
Available
Module with BME680 sensor for measuring environmental conditions such as concentration of volatile organic compounds (VOC), atmospheric pressure, temperature and humidity. I2C or SPI communication. SparkFun SEN-16466
zł126.62
24h
Available quantity: 4
Available
BME280 integrates onboard temperature sensor, humidity sensor and barometer. It provides both SPI and I2C interfaces; and can be widely used in environmental monitoring, story height measurement and Internet of Things (IoT) control and so on. SEN0236
zł93.69
24h
Available quantity: 4
Available
Miniature pressure measurement module equipped with a 25 psi piezoresistive pressure sensor. It allows you to perform calibrated and compensated pressure measurements from 60 mbar to 2.5 bar. SparkFun SEN-16476
zł83.66
24h
Available quantity: 1
Available
KAmodLPS25HB is a module that allows the measurement of atmospheric pressure in the range of 260-1260hPa with a resolution of 0.01hPa, and thanks to the embedded regulator and voltage translator levels, it can be successfully used in systems supplied with a voltage of 2.5 - 5.5 V.
zł29.90
24h
Available quantity: 225
Available
Water pressure sensor with 3-pin Gravity interface. It enables the measurement of liquid pressure in the range from 0 to 1.6 MPa. It is supplied with the voltage of 5 V and has a linear output voltage from 0.5 to 4.5 V. DFRobot SEN0257
zł100.66
24h
Available quantity: 1
Available
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
zł92.99
24h
Available quantity: 4
Available
Module with temperature, humidity and pressure sensor BME680 from Bosch. The module communicates via I2C or SPI interfaces.
zł50.41
6 weeks
No product available!
Module with waterproof barometer and MS5837 temperature sensor. It enables pressure measurement in the range from 300 to 1200 hPa and communicates via I2C
zł113.82
24h
Available quantity: 3
Available
Module with pressure and temperature sensor BMP280. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020192
zł60.63
24h
Available quantity: 3
Available
Multi-functional environmental sensor consisting of SHTC3 temperature and humidity sensor, BMP280 pressure sensor, VEML7700 ambient light sensor and ML8511 UV sensor. DFRobot SEN0500
zł136.78
24h
Available quantity: 1
Available
A module with a digital barometer BMP390L dedicated to industrial applications. The system measures pressure in the range from 300 to 1250 hPa and temperature from -40℃ to 85℃. DFRobot SEN0423
zł57.86
24h
Available quantity: 5
Available
KAmodLPS331 is a module that allows the measurement of atmospheric pressure in the range of 260 - 1260 hPa with a resolution of 0.02 hPa. Supply voltage 2.5 - 5.5 V,
zł19.99
24h
Available quantity: 297
Available
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C or SPI interface. Waveshare BME280 Environmental Sensor
zł44.77
Delivery date unknown
No product available!
Module with digital barometer BMP388. It enables pressure measurement in the range from 300 to 1250 hPa and communicates via I2C or SPI. Waveshare BMP388 Barometric Pressure Sensor