Hantek CC-800 - current probe for 800A oscilloscopes
ID: 1185325
5906623435210
zł635.00
Tax included
zł516.26 tax excl.
Probe for measuring direct current up to 800 A and alternating current up to 500 A. Operates at 5 kHz and can be connected to an oscilloscope via a BNC connector. Powered via USB. Hantek CC-800
Description
Probe for measuring direct current up to 800 A and alternating current up to 500 A. It uses a standard BNC interface and can be connected to an oscilloscope or multimeter. It operates at 5 kHz and has two measurement ranges: 40 and 500/800 A. It is powered by a 9 V battery. It will find applications in industry, automotive electronics, power supplies or inverters.
Features
- Bandwidth: 5 kHz
- Ranges: 40 A or 500/800 A
- Sensitivity: 10 mV/A (40A), 1 mV/A (500/800A)
- Accuracy:
- 1.5% ± 0.5 A (40A DC)
- 1,5% ± 0,5 A (800 A DC)
- 2% ± 0,5 A (40 A AC)
- 2% ± 0.5 A (500 A AC)
- Measuring range:
- 10 A to 40 A
- 1 A to 500/800 A
- Maximum cable diameter: 30 mm
- Overload indication: buzzer, lamp
- BNC connector
- Power supply: 9 V 6F22
- Dimensions: 195 x 70 x 33 mm
- Weight: 250 g
1185325
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 60 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-80
zł22.47
24h
Available quantity: 25
Available
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-150
zł28.11
24h
Available quantity: 18
Available
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 200 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-200
zł73.82
24h
Available quantity: 5
Available
Oscilloscope probe designed for the analysis of signals generated by the ignition coil in automotive engines. It is compatible with most digital oscilloscopes. Hantek HT25
zł133.54
24h
Available quantity: 10
Available
Other products in the same category (16)
The P2150 oscilloscope probe with a 150 MHz bandwidth and BNC connector ensures high signal integrity and wide bandwidth, featuring switchable attenuation of 1X/10X and an input resistance of 1 MΩ/10 MΩ ±2%. The set includes accessories such as a compensation tool, identification rings, and a hook clip for easier use.
zł134.08
24h
Available quantity: 1
Available
The housing for the DSO138 oscilloscope allows for easy storage and mobile use of the device. It protects the PCB and any microcircuits on it from dirt or accidental damage.
zł14.90
24h
Available quantity: 7
Available
Universal oscilloscope probe with BNC connector. It has a voltage divider of 10:1 and offers a frequency response of 100 MHz. It allows measurements with a maximum voltage of up to 600 V. P6100
zł54.16
24h
Available quantity: 16
Available
Professional oscilloscope probe, ideal for precise signal measurements. Hantek PP-150B
zł29.00
24h
Available quantity: 17
Available
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP12000XS
zł5,043.00
4 weeks
No product available!
Test probe tip with 1000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP1000-2
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł2,600.76
Delivery date unknown
No product available!
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-2.3mm
zł47.90
24h
Available quantity: 4
Available
Probe for measuring AC currents up to 1000 A. It works in the range from 10 Hz to 100 kHz, it can be connected to the oscilloscope through the BNC connector. Micsig ACP1000
zł1,199.03
24h
Available quantity: 1
Available
A 20:1 signal attenuator designed to assist in measuring automotive performance, including measuring fuel injector and primary ignition runs. Hantek HT201
zł51.99
24h
Available quantity: 3
Available
A probe with a Rogowski coil dedicated to measuring current in a wide frequency range. Measurements can be made without modifying the circuit under test. Micsig RCP500
zł999.01
4 weeks
No product available!
A probe tip with attenuation factor of 10000X. Dedicated to Micsig probes from the SigOFIT series operating in the 800 MHz and 1 GHz frequency band. Micsig OP10000-1G
zł7,629.76
4 weeks
No product available!
BNC connector cable (adapter) to the "Alligator clip" connector. It allows you to conveniently connect the device, e.g. to an oscilloscope. Digilent (240-134)
zł52.64
24h
Available quantity: 3
Available
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 200 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-200
zł73.82
24h
Available quantity: 5
Available
Probe for measuring direct and alternating current up to 30 A. Works in the band up to 50 MHz, can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP503B
zł3,431.45
4 weeks
No product available!
A set of needle probes used for piercing wire insulation. They can be used as pin probes when working with small PCBs or connectors. Hantek HT307
zł33.12
24h
Available quantity: 16
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3000
zł1,252.13
4 weeks
No product available!
Probe for measuring direct current up to 800 A and alternating current up to 500 A. Operates at 5 kHz and can be connected to an oscilloscope via a BNC connector. Powered via USB. Hantek CC-800