PP-90 - oscilloscope probe x10 600V 80MHz
ID: 1185328
zł40.32
Tax included
zł32.78 tax excl.
Universal oscilloscope probe with BNC connector and 10:1 voltage divider. It has a frequency response of 80 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-90
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Universal oscilloscope probe with BNC connector, 10:1 voltage divider and 80 MHz frequency response. It allows you to make measurements with a maximum voltage of up to 600 V. The probe is terminated with a sharp tip on which a cap with a hook can be applied, while the ground wire has a crocodile connector. It can work with analog and digital oscilloscopes with a standard BNC connector.
Features
- Bandwidth:
- x1: 6 MHz
- x10: 80 MHz
- Maximum voltage:
- x1: 200 V DC + Peak AC
- x10: 600 V DC + Peak AC
- Attenuation: x1, x10
- Input impedance: 1 MΩ, 100 MΩ
- Input capacitance:
- x1: 85pF - 115pF
- x10: 18.5pF - 22.5pF
- Compensation range: 20 pF to 40 pF
- Cable length: 120 cm
- Operating temperature: -10 to 50°C
- Operating humidity: up to 85%
Kit contains
- Oscilloscope probe with BNC connector
- Measuring cap
- Set of color markers
1185328
You might also like
Digital oscilloscope. It has two measurement channels with 100 MHz bandwidth. Hantek DSO2C10
zł1,099.01
24h
Available quantity: 4
Available
A 2-channel digital oscilloscope that connects to a computer via a USB interface. It offers a frequency bandwidth of 20 MHz and sampling up to 48 MS/s. Hantek 6022BE
Regular pricezł350.00zł320.00
24h
Available quantity: 7
Available
A 20:1 signal attenuator designed to assist in measuring automotive performance, including measuring fuel injector and primary ignition runs. Hantek HT201
zł62.00
24h
Available quantity: 3
Available
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 200 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-200
zł74.07
24h
Available quantity: 35
Available
Other products in the same category (16)
An oscilloscope probe designed to analyze signals generated by the ignition coil in car engines. It is compatible with most digital oscilloscopes. Micsig MS-A-008
zł147.80
24h
Available quantity: 2
Available
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 150 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig MDP3001
zł1,191.14
Delivery date unknown
No product available!
Probe for measuring direct and alternating current up to 100 A. It works in the 800 kHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100A
zł1,099.01
24h
Available quantity: 5
Available
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-1.0mm
zł47.90
24h
Available quantity: 3
Available
High voltage differential probe. It is characterized by good measurement parameters: with a 100 MHz band and an operating voltage up to 700 V. The probe has two attenuation factors: 10X and 100X. Micsig DP10007
zł869.00
24h
Available quantity: 1
Available
BNC connector adapter cable for mini-grabber clips. Connects to Analog Discovery 2 via a BNC adapter. Digilent 240-136
zł71.86
24h
Available quantity: 3
Available
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 800 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP08P
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł94,999.00
Delivery date unknown
No product available!
Oscilloscope probe designed for the analysis of signals generated by the ignition coil in automotive engines. It is compatible with most digital oscilloscopes. Hantek HT25
zł152.00
24h
Available quantity: 10
Available
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 1 GHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP10P
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł112,990.00
Delivery date unknown
No product available!
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 500 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP05P
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł74,999.00
Delivery date unknown
No product available!
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-1.5mm
zł47.90
24h
Available quantity: 2
Available
Test probe tip with 1000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP1000-2
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł2,600.76
Delivery date unknown
No product available!
Test probe tip with 2000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 800 MHz and 1 GHz frequency band. Micsig OP2000-1G
Product available on request. Please send your inquiry to the following address: sales@kamami.com
zł10,516.50
Delivery date unknown
No product available!
High-voltage differential probe. It has good measurement characteristics: a bandwidth of 100 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8100
zł1,399.00
24h
Available quantity: 4
Available
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 60 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-80
zł37.33
24h
Available quantity: 81
Available
A set of needle probes used for piercing wire insulation. They can be used as pin probes when working with small PCBs or connectors. Hantek HT307
zł40.00
24h
Available quantity: 16
Available
Universal oscilloscope probe with BNC connector and 10:1 voltage divider. It has a frequency response of 80 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-90