CP2100B - current probe for Micsig oscilloscope
ID: 586606
5906623476527
zł2,143.69
Tax included
zł1,742.84 tax excl.
Probe for measuring direct and alternating current up to 100 A. It works in the 2,5 MHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100B
Description
Probe for measuring DC and AC current up to 100 A. Uses standard BNC interface and can be connected to an oscilloscope or a multimeter. It works in the 2,5 MHz band, has two measuring ranges: 10 and 100 A. The probe can work with manual or automatic regulation and is powered by the USB connector. It can be used in industry, automotive electronics, power supplies and inverters. Dedicated to Micsig devices.
Features
- Bandwidth: 2,5 MHz
- Rise Time: 140 ns
- Ranges: 10 A or 100 A.
- Sensitivity: 0.1V/A (10A), 0.01V/A (100A)
- Accuracy:
- 3% ± 50 mA (10A)
- 4% ± 50 mA (100 A, 500 mA to 40 Apk)
- 15% (100 A, 40 Apk to 100 Apk)
- Signal delay: ＜ 150 ns (10 A), ＜ 200 ns (100 A)
- Measurement range:
- 50 mA to 10 Apk (10 A)
- 1 A to 100 Apk (100 A)
- Maximum measured current:
- 100 Apk, 70.7 Arms (DC + ACpk)
- 200 Apk-pk, 70.7 Arms (AC)
- Maximum working voltage: CAT Ⅲ 300V, CAT Ⅱ 600V
- Maximum cable diameter: 13 mm
- Overload indicator: buzzer, lamp
- Power supply: USB 5V
Kit contains
- CP2100B current probe
- USB cable
586606
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A portable tablet oscilloscope with a 10.1 inch LCD display and a touch screen. It has four channels and has good measurement parameters: 300 MHz bandwidth, 2 GSa/s sampling rate and 220 Mpts memory buffer. Micsig TO3004
zł5,699.00
24h
Available quantity: 1
Available
A portable oscilloscope for automotive applications with an 8-inch LCD display and a touch screen. It has four channels and has good measurement parameters: 100 MHz bandwidth, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig SATO1004 Plus
zł3,756.17
24h
Available quantity: 1
Available
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 300 MHz band, 2 GSa/s sampling rate and 280 Mpts memory buffer. Micsig STO2302C
zł4,386.35
24h
Available quantity: 1
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP700
zł1,195.19
Delivery date unknown
No product available!
The Micsig SATO2002 is a dual-channel tablet oscilloscope with a 200 MHz bandwidth, offering a maximum sampling rate of 1 GSa/s and a memory depth of 70 Mpts. Equipped with an 8-inch touchscreen LCD, it simplifies automotive diagnostics, including testing charging systems, ignition, and CAN and LIN networks
zł3,398.93
24h
Available quantity: 1
Available
Other products in the same category (16)
Probe for measuring AC currents up to 1000 A. It works in the range from 10 Hz to 100 kHz, it can be connected to the oscilloscope through the BNC connector. Micsig ACP1000
zł1,199.03
24h
Available quantity: 1
Available
Professional oscilloscope probe, ideal for precise signal measurements. Hantek PP-150B
zł29.00
24h
Available quantity: 17
Available
Test probe tip with 2000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 800 MHz and 1 GHz frequency band. Micsig OP2000-1G
zł10,516.50
4 weeks
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1500
zł1,151.14
4 weeks
No product available!
The probe tip has a 50X attenuation factor. Designed for Micsig probes from the SigOFIT series operating in the 100MHz, 200MHz and 350MHz frequency band. Micsig OP50-3
zł1,398.90
4 weeks
No product available!
Micsig P130A is a reliable oscilloscope probe, ideal for precise measurements in high-voltage systems with a wide frequency range
zł150.05
24h
Available quantity: 2
Available
Oscilloscope probe designed for the analysis of signals generated by the ignition coil in automotive engines. It is compatible with most digital oscilloscopes. Hantek HT25
zł133.54
24h
Available quantity: 10
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3000
zł1,252.13
4 weeks
No product available!
A probe tip with attenuation factor of 100X. Dedicated to Micsig probes from the SigOFIT series operating in the 500 MHz frequency band. Micsig OP100-5
zł4,065.81
4 weeks
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a 500 MHz frequency band and the ability to measure voltages up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP705
zł4,496.14
24h
Available quantity: 1
Available
The Hantek PP-300 is an oscilloscope probe with a bandwidth of 300 MHz, designed for precise measurement of high-frequency signals. It is compatible with a wide range of digital and analog oscilloscopes and features a switchable attenuation setting between 1× and 10×, allowing flexible adaptation to various applications. Thanks to its ergonomic design and robust construction, the probe offers user comfort and durability for everyday use in laboratory environments.
zł134.54
24h
Available quantity: 10
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP700
zł1,195.19
4 weeks
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3002
zł1,902.91
4 weeks
No product available!
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-2.3mm
zł47.90
24h
Available quantity: 4
Available
A probe for measuring AC and DC currents up to 65 A. It operates in a bandwidth of up to 20 kHz and can be connected to an oscilloscope via a BNC connector. Hantek CC-65
zł357.17
4 weeks
No product available!
Test probe tip with 20X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 800 MHz and 1 GHz frequency band. Micsig OP20-1G
zł6,599.00
4 weeks
No product available!
Probe for measuring direct and alternating current up to 100 A. It works in the 2,5 MHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100B