STM32Butterfly2 - development kit with STM32F107 microcontroller

JTAG interface for microcontrollers with ARM core

Cables for evaluation boards, set of 10 pcs., blue colour

Cables for evaluation boards, set of 10 pcs., red colour

Cables for evaluation boards, set of 10 pcs., green colour

USB A/B cable (1.8m)

10-wire 1m IDC F/F cable

10-wire 30cm IDC F/F cable

8-bit Bidirectional Voltage Converter

SD/MMC Module with Voltage Level Translator

Module with digital thermal sensor, thermostat and I2C interface

A 30 cm long connecting cable (4 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF04S connector that KAmod modules are equipped with. cabhu04-30

A 30 cm long connecting cable (6 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF06S connector that KAmod modules are equipped with. cabhu06-30

IDC10 IDC10 Adapter/Splitter

8-position DIP-Switch Module

Programmable RGB and RGBA LED driver

Module with 8 LEDs

Cables for evaluation boards, set of 10 pcs., yellow colour

Cables for evaluation boards, set of 10 pcs., white colour

3-axis motion sensor module with digital output

Module with Nokia 6100/6610 color graphic LCD

Pressure sensor module with I2C interface (MPL115A2)

Module of a stereo 24-bit audio converter with I2S interface (TS4657).

LAN interface with DP83848 chip

Krzysztof Paprocki

Graphic LCD (Nokia 5110)

ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 microcontrollers

Marcin Peczarski

Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)

A new programmer-debugger with the USB interface. It supports the STM32 microcontrollers via SWD interface. ZL30PRGv2-1 is compatible with the STMicroelectronics ST-Link/V2-1. It also has the function of USB-UART converter, thanks to which it can successfully replace the KAmodRS module.

The BLE 4.0 Bluetooth module with the CC2541 system has an integrated PCB antenna and an extensive AES security system. Thanks to the built-in system CC2541 from Texas Instruments, it is possible to create a project without the use of an additional microcontroller. modCC2541

Arduino LCD Shield with a 4 digit 7 segment digital tube display (common cathode). DFR0382

RS-232 D-Sub (f) / D-Sub (m) cable, 2 m long. Akyga AK-CO-01

Module with a GPS PA1010D receiver with a built-in ceramic antenna. It can download data from the most popular navigation systems: GPS, GLONASS, GALILEO. Pimoroni PIM525

Keyboard module with 16 buttons in the form of a 4x4 matrix. Equipped with an 8-pin connector with 2.54 mm pitch

Module with 16-channel PCF8575 IO expander controlled by the I2C interface. Equipped with a STEMMA QT connector. Adafruit 5611

Audio amplifier module with three output channels. It can be powered from 12 to 24 V and has two 50 W outputs (left and right) and one 100 W output (bass). Equipped with Bluetooth 5.0 communication

The DS3231 RTC module for Raspberry Pi is a high-precision, battery-powered, I2C-communicating real-time clock that provides accurate timekeeping thanks to temperature compensation and a quartz resonator

The IMU Pro Mini Unit M5Stack U171 is an advanced measurement tool combining motion detection, magnetic field sensing, and atmospheric pressure measurement. Its compact design and I2C interface facilitate integration with various systems, making it widely applicable in navigation, automation, and robotics. M5Stack U171