.png)
- Out-of-Stock
J-Link EDU (8.08.90)
ID: 178667
JTAG/SWD Emulator with USB interface for educational use, Segger
Segger J-Link EDU
JTAG/SWD Emulator with USB interface for educational use, Segger
A package for educational pupose, which includes J-Link with a license for Flash Breakpoints.
J-Link EDU is available for everybody who does not use the software to develop a product for sale.
The offer includes free use of Flash Breakpoints. The only limitation is that it may not be used to develop a product.
The J-Link EDU is natively supported by IAR EWARM, KEIL µVision, Rowley Crossworks, and CodeSourcery G++. Via GDB-Server, the supported tool-chains also include Atollic TrueStudio, Yagarto, and other GDB based or compatible development environments.
The Flash Breakpoints option allows the user to set an unlimited number of breakpoints within a device’s internal flash memory. Debugging limitations inherited by the number of hardware breakpoints (2 on ARM7/9, 4 on Cortex-M0 and typically 6 on Cortex-M3) are completely removed.
Terms of use:
You may use the J-Link EDU for non profit educational purposes only. Non-profit educational purposes means that you may not use the J-Link EDU and its J-Link software
- direct or indirect in or for a profit organization or business purposes or other undertaking intended for profit
- direct or indirect in any other commercial environment (e.g. office)
- to develop, debug, program or manufacturer a commercial product (or parts thereof)
- to use it to either earn money or reasonably anticipate the receipt of monetary gain from it.
Any other use of the J-Link EDU is prohibited and illegal!
For clarification purposes: A student using the J-Link EDU direct or indirect in a business or profit organization (e.g. company) is considered a violation of the scope of this agreement.
Note: Before installing the J-Link EDU software package you need to accept the Terms of use as shown on the screen below:
Features
- Direct download into flash memory of most popular microcontrollers supported
- USB 2.0 interface
- Supported CPUs: Any ARM7/9/11, Cortex-A5/A8, Cortex-M0/M1/M3/M4, Cortex-R4
- Serial Wire Debug (SWD) support
- Serial Wire Viewer (SWV) support
- Automatic core recognition
- No power supply required, powered through USB
- Support for adaptive clocking
- All JTAG signals can be monitored, target voltage can be measured
- Standard 20-pin JTAG connector
- Wide target voltage range: 1.2V - 3.3V, 5V tolerant
- USB and 20-pin ribbon cable included
- optional Flash programming software (J-Flash) available
- optional Flash DLL available, which allows using flash functionality in custom applications
- optional Software Developer Kit (SDK) available
- Target power supply: J-Link can supply up to 300 mA to target with overload protection
Contents
- Segger J-Link EDU interface
- USB cable
- 20-pin ribbon cable
Download:
- J-Link EDU webpage
- J-Link Documentation
- Artykuł w portalu Mikrokontroler.pl pt. "Programatory i debuggery firmy Segger (J-Link) - przegląd możliwości"
- Artykuł w portalu Mikrokontroler.pl pt. "Obsługa interfejsu Segger J-Link w środowisku uVision (ARM/Keil)"
Code: J-Link/JLINK EDU (8.08.90)
178667
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Available
Available
No product available!
Adapter for 20/14/10-pin JTAG. It allows to connect the JTAG programmer to a evaluation boards which uses various standards of the programming connector. IDC20, IDC14, IDC10 and JST-XH sockets are available.
zł10.22
24h
Available quantity: 6
Available
JTAG interface galvanic separator that protects equipment against damage caused by potential differences, with a maximum clock frequency of 110 MHz, 3-5 V power supply, and isolation voltage up to 1 kVDC, equipped with multiple connectors and optical status signaling
zł399.00
24h
Available quantity: 33
Available
Segger J-Link Ultra - an ultra-fast USB JTAG/SWD debug probe for programming and debugging ARM, Cortex, Renesas RX and RISC-V microcontrollers. Supports data transfer speeds up to 4 MB/s, JTAG/SWD interface frequencies up to 50 MHz, and target power consumption measurement. Segger 8.16.28
zł4,558.98
24h
Available quantity: 1
Available
Hi-Speed JTAG/SWD Emulator with USB and Ethernet interface, Segger
zł5,787.16
24h
Available quantity: 4
Available
Standard 20-pin 0.1 male connector to provide electrical isolation, Segger
zł1,031.90
24h
Available quantity: 1
Available
JTAG/SWD Emulator for ARM7/9, Cortex and Renesas RX cores with USB interface, Segger
zł3,385.91
24h
Available quantity: 2
Available
J-Link Needle Adapter - connect J-Link to a PCB, Segger
zł521.14
24h
Available quantity: 3
Available
Available
Adafruit 2094 - JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Cable Adapter Board
zł24.83
24h
Available quantity: 60
Available
J-LINK EDU Mini is a version of the J-Link EDU (8.08.90) in a reduced form factor with identical functionality for Cortex-M based targets. It has been designed to allow students and educational facilities as well as hobbyists access to top of the line debug probe technology. Version for non-commercial use only. J-Link EDU mini
zł386.70
24h
Available quantity: 21
Available
Other products in the same category (16)
The Pmod CAN is a CAN 2.0B controller with an integrated transceiver. The embedded Microchip MCP25625 chip connects directly to the physical CAN bus and meets automotive requirements for high-speed (1 Mb/s), low quiescent current, electromagnetic compatibility, and electrostatic discharge. Digilent 410-353
Retired
No product available!
True MCU trainer board designed from the ground up around teaching embedded systems. Featuring the PIC32MX370 from Microchip plus an exhaustive set of peripherals, students gain exposure to a wide range of embedded systems related concepts while using a professional grade tool set. Digilent 410-336
Retired
No product available!
A miniature module that allows you to control devices using a button, without connecting them with wires
Retired
No product available!
μRemote Basic in a white housing is a fourth generation pilot for controlling all devices in the home and garden. Configurable from the application, loaded like a smartphone
Retired
No product available!
μRemote PRO in a black metal housing is a fourth generation pilot for controlling all devices in the home and garden. Configurable from the application, loaded like a smartphone
Retired
No product available!
500-3C soldering tip, round, 3 mm in diameter, for soldering stations, eg Zhaoxin 950, QUICK 203G, YiHua WEP 950.
Retired
No product available!
SparkFun Variable Load Kit is a self-assembly set, used to determine the current drawn from a given power source. This module can be used to test power stability at various loads, battery life tests etc. It can test voltage up to 30 V and generate load from several mA to 4 A. SparkFun KIT-14449
Retired
No product available!
Board with a 32-bit Nuvoton NUC123ZD4AN0 microcontroller with an ARM Cortex-M0 core, the user has 31 I / O lines, 6 analog inputs and UART, SPI, I2S and I2C interfaces. Compatible with Arduino. DFRobot DFR0392
Retired
No product available!
Module with 4-channel DC motor driver (2 x TB6612FNG) designed for FireBeetle boards. It communicates via the I2C interface. DFRobot DFR0508
Retired
No product available!
Development board with the PSoC5LP ARM Cortex system. Equipped with two processors: the CY8C5868LTI-LP039 debugger / programmer and the system supporting the application code CY8C5888AXI-LP096. Both processors are based on the Cortex-M3 core and have 256kB flash memory, 64kB SRAM and 2kB EEPROM. Sparkfun DEV-13714
Retired
No product available!
A single board computer based on the Intel Celeron N3160 quad-core processor. It combines the ability to run software for PCs and Arduino. SB02-3740-0000-C0
Delivery date unknown
No product available!
OpenMV M7 is a small PCB with an OV7725 camera and a STM32F765VI microcontroller. The module allows easy implementations in devices / robots where there is a need for image processing (including face detection, color recognition, or reading QR codes). SparkFun SEN-15325
Retired
No product available!
No product available!
The TBMP3902RO-KF is a 2-pole detachable terminal block with a 3.96 mm pitch, designed for mounting on printed circuit boards. It features male contacts and is made from materials that ensure durability and reliability of electrical connections. This product complies with international standards, making it suitable for use in various electronic projects. HT396R-3.96-2P
Retired
No product available!
No product available!
The official additional internet power board (PoE) for Raspberry Pi 3 B + and Raspberry Pi 4 B allows you to use the PoE interface to power Raspberry Pi via an Ethernet cable, eliminating the need for a separate power supply. RPI3-MODBP-POE
Retired
No product available!
JTAG/SWD Emulator with USB interface for educational use, Segger