Category: STARTER KITS, PROGRAMMERS, MODULES

7-segment display controller, allowing communication over the I2C bus. Allows you to limit the pins needed to control the display. Adafruit 3088

Flash Programmer for ARM7/9/11, Cortex, RX and PPC cores

MH-Z16 carbon dioxide sensor with Grove connector. It communicates via the UART interface. Seeed Studio 101020067

Ring light with 16 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-16

Ring light with 12 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-12

An expansion board designed for MicroMod main modules. It is equipped with a Qwiic connector and one place for attaching functional modules. SparkFun DEV-18575

Function module designed for MicroMod boards. It allows you to add WiFi wireless communication based on the ESP32 chip to the project. SparkFun WRL-18430

DS3231 Precision RTC FeatherWing adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensated Crystal Oscillator (TCXO) to any Feather main board. Adafruit 3028

Module of the 3-axis LIS2DH, I2C accelerometer. DFRobot SEN0224

Module with a button and red LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-R

Development kit with nRF52840 microcontroller with ARM Cortex M4F core and 2 MB external QSPI memory. It has built-in BLE communication. It can be programmed using the Arduino IDE or CircuitPython. Adafruit 45481

A module dedicated to power analysis of nRF5 series development boards. It is designed to measure and optimize power consumption in embedded device applications. Nordic Semiconductor nRF6707

WiFi module dedicated to Coral Dev Board Micro. It uses the Murata LBEE5HY1MW chip and connects to the base board via B2B connectors. Coral G650-07974-01

The Segger J-Link Supply Adapter (8.06.14) allows you to manually set the debug probe I/O voltage, preventing damage to the target board, adjustable from 1.2V to 5.0V. It can be inserted between J-Link or Flasher and the target device, reducing the number of connections needed, which is especially useful in a production environment.

A set with a radio transmitter and receiver operating at 433 MHz. The modules are equipped with Gravity connectors and communicate via a digital interface. DFRobot TEL0140-1

ESP32-S3-Touch-LCD-5B is an advanced development platform featuring a high-resolution 5" IPS display with a five-point touch panel, designed for embedded projects, HMI panels, and automation. Its high processing power, versatile interfaces, and support for programming in C/C++ and MicroPython make the module suitable for both prototyping and fully developed industrial solutions.

Module with a 4-inch touch display that uses two MCU systems (ESP32-S3 and RP2040) and supports Wi-Fi and BLE communication. The board is equipped with USB Type C, I2C (Grove) and analog inputs interfaces and can easily connect to other peripheral devices. Seeed Studio 114993068

Module with PM2.5 dust sensor. The board is equipped with a Gravity connector and communicates via the I2C interface. DFRobot SEN0460

Universal programmer for serial EEPROM and Flash memories, including AVR, STM32 and STM8 microcontrollers. It is controlled from a computer using a USB interface and software for Windows systems, but it can also operate autonomously without a computer. SkyPRO II

A compact IoT development kit based on ESP32-PICO-V3-02, supporting WiFi and equipped with numerous components such as RTC, microphone, IR transmitter, IMU and buzzer. With a larger battery capacity (200 mAh), 1.14-inch TFT screen and compatibility with UIFlow, MicroPython, Arduino and .NET nanoFramework, it is an ideal solution for IoT developers and automation projects. M5stack K016-P2