Category: Electronic modules

Industrial RS232/485/422 to Ethernet converter. It has support for industrial Modbus RTU/ASCII and Modbus TCP protocols. ADM-5850G

8 Mpx camera module with IMX219 sensor with low distortion lens. The camera is intended for use as a replacement on the RPI Camera Board V2. ArduCAM B0184

8 Mpx camera module with IMX219 sensor. The camera is intended for use as a replacement on the RPI Camera Board V2. ArduCAM B0180

Set of 6 lenses with M12 mount included with adapter and accessories. Designed to work with the Raspberry Pi HQ camera. ArduCAM LK003

Gravity module designed based on the GP8503 system. It is a two-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with 12-bit resolution and 0.1% accuracy. It allows you to generate analog signals with a voltage range from 0 to 2.5 V or from 0 to VCC. DFRobot DFR1034

M12 mount lens included with adapter. 25 mm focal length and 20° FoV. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN036

LVDS to HDMI converter module with one LVDS connector

Isolated RS485 module with signal amplifier function. Designed for communication within industrial networks. YN2209

Camera module for Raspberry Pi minicomputers with IR-CUT filter. Equipped with an OV5647 (5 MPx) sensor, it supports image acquisition both during the day and at night. Waveshare 15203

CS-Mount lens. 8 mm focal length, 50° FoV, manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN039

Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-MDD10

4-channel RS485 to Ethernet converter designed for industrial environments. Connects serial server, Modbus gateway, MQTT gateway, RS485 to JSON. It has four RS485 ports and one Ethernet port. Waveshare 4-CH RS485 TO ETH (B)

DC-DC Step-Up converter U3V40F9 with an output voltage of 9 V, an input voltage of 1.3 to 9 V and a maximum output current of 4 A. Pololu 4015

Pmod PIR is a module with a PIR motion sensor (EKMC1601111), which allows you to detect motion up to 5 meters from the module. The sensor during operation is characterized by low power consumption. Digilent 410-389

Module with a precise clock RTC DS3231 dedicated to the Raspberry Pi Pico. Communication via the I2C interface. SB Components 21420

USB - UART converter based on the CH9102F chip. Compatible with the voltage of 3.3 V and 5 V, it has been equipped with a USB type C connector. Adafruit 5568

High-power dual power supply module based on LT1083CP voltage regulators. It has an adjustable output voltage from 1.25 to 48 V DC and an output current of up to 10 A. It provides power for both channels in stereo audio amplifiers

A 5-channel flame detector module for detecting a flame over a larger area. Detects fire with 5 sensors that are placed on the module every 30 degrees. It has a digital and analog output. modFLAME-5CH

DC-DC Step-Down converter module. It has an input voltage from 15 to 45 V, an output voltage of 15 V and a maximum output current of up to 2.7 A. Pololu 4897

A sound card in the form of a small device with a USB plug, designed to work with the Raspberry Pi and NVIDIA Jetson Nano minicomputer. Waveshare USB TO AUDIO