Category: Electronic modules

Analog voltage divider module. It enables a 5-times reduction of the input voltage. DFRobot DFR0051

DC-DC Step-Down converter module. It has an input voltage from 6 to 45 V, an output voltage of 6 V and a maximum output current of up to 3.3 A. Pololu 4893

Module with 16-channel PCF8575 IO expander controlled by the I2C interface. Equipped with a STEMMA QT connector. Adafruit 5611

DC-DC Step-Down converter module. It has an input voltage from 5 to 45 V, an output voltage of 5 V and a maximum output current of up to 3.4 A. Pololu 4892

4-channel PCIe port expander. It can be powered with 12 V via a PCIe connector or an external DC connector. Waveshare PCIe-Packet-Switch-4P

DC-DC Step-Down converter module. It has an input voltage from 3.3 to 45 V, an output voltage of 3.3 V and a maximum output current of up to 3.7 A. Pololu 4891

Gravity module designed based on the GP8413 system. It is a two-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with a resolution of 15-bit and an accuracy of 0.2%. It allows you to generate analog signals with a voltage range from 0 to 10 V or 0 to 5 V. DFRobot DFR1073

C-Mount lens. 8mm focal length, FoV 58.4° (H) x 44.6° (V), manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN043

Gravity module designed based on the GP8101S system. It is a single-channel DAC (analog-to-digital) converter with PWM communication that offers an output signal with 8-bit resolution and 0.2% accuracy. It allows you to generate analog signals with a voltage range from 0 to 10 V or 0 to 5 V. DFRobot DFR1036

Multifunctional lens calibration kit for M12, CS-Mount, C-Mount and DSLR lenses. It allows focus calibration, FoV measurement without the need for additional calculations and focusing. ArduCAM B0226

Universal driver for DC and LED motors. It can work with a supply voltage from 5 V to 24 V and a load up to 10 A. DFRobot DRI0050

Two-channel driver for DC motors with an operating voltage from 7 to 35 V and a continuous current up to 10 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDDS10

Module with barcode and QR scanner. It allows you to read one-dimensional and two-dimensional codes and communicates via the I2C and UART interface. DFRobot SEN0486

Converter that provides easy communication between RS485 and RJ45 Ethernet interface. Configured via a web page. Supports support for Modbus RTU and Modbus TCP protocols. ZLAN5143D

Module with LED driver. It can control LED strips with a length of 1 to 2 meters at a voltage of 9 V or from 1 to 5 meters at a voltage of 12 V. Seeed Studio 105020002

RS232 to RS485/RS422 converter designed for professional industrial applications. It is equipped with the SP3232EEN and SP485EEN chips, which ensures fast, stable and reliable communication. Communication interfaces are connected via a DB9 connector (RS232) and a screw connector (RS485/RS422). Waveshare RS232 TO RS485/422

Module with a button and re LED backlight. Controlled by the I2C interface, it has a built-in debouncing mechanism, pull-up resistors as well as interrupts and a FIFO queue. SparkFun BOB-15932

The module with 4 relays is designed to work with Arduino. It allows you to control devices with operating parameters up to 250VAC/7A or 30VDC/10A. Seeed Studio 103030009

Module with a step-up converter with an input voltage from 10 V to 32 V and an adjustable output voltage from 15 V to 32 V. It has a maximum power of 150 W

0.31 Mpx camera module with OV7251 sensor compatible with all versions of Raspberry Pi. The maximum video resolution is 640×480 pixels. ArduCAM B0161