Category: Motors
Subcategories
There are 629 products.
Motor with a diameter of 37 mm and a length of 76.5 mm, with a gearbox of 6.3:1, a working voltage of 12 V, a current consumption from 1.1 A to 6 A, a speed of 2300 RPM and a maximum torque of 2.1 kg*cm. JGB37-550
Motor with 37 mm diameter and 65 mm length, 6,3:1 metal gear, 12 V operating voltage, 0,2 A to 5,5 A power consumption, 1600 RPM speed, 3 maximum torque and 64 CPR encoder. Pololu 4757
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 30 RPM, operating voltage 6 V. GA1036-N20M-0052
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 100 RPM, operating voltage 6 V. GA1036-N20M-0055
A small motor with a metal gear ending with a shaft with M3 thread, rotation speed 60 RPM, operating voltage 6 V. GA1036-N20M-0054
170 kV brushless DC motor with Hall sensor. Powered with the voltage from 18 to 42 V, dedicated to electric skateboards and scooters
A mini water pump with a capacity of 240 l/h designed for home automatic irrigation systems. It is immersed in water, powered by 12 V and has a power of approx. 5 W
Small metal gear motor, 100 RPM speed, 3V operating voltage. GA12-N20-0005
A two-piece aluminum adapter for transmitting wheel drive to motors with a 4mm diameter shaft. Mounting screws and set screws included. Pololu 2672
Small metal gear motor, 50 RPM speed, 12V operating voltage. GA12-N20-0021
298:1 Micro Metal Gearmotor with Extended Motor Shaft
A mini water pump with an efficiency of 230 l/h designed for home automatic irrigation systems. It is immersed in water, powered with the voltage from 6 to 12 V and has a power of approx. 4.2 W
Miniature, 12 V brush DC motor with metal gear and 15.25:1 gear ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft with a length of 9 mm and a diameter of 3 mm. Pololu 4788
Miniature, 12V brush DC motor with metal gear with 15.25: 1 ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft has a length of 9 mm and a diameter of 3 mm. It also has an extended motor shaft with dimensions of 4.5 × 1 mm. Pololu 4789
Tamiya double gear dedicated to small mobile robots. It is made of plastic modes that can be adjusted to two gears: 58:1 and 203:1. Pololu 61
Solarbotics GM8 143:1 Gear Motor Offset Output
High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511
Aluminum bracket with holes for M3 screws for 37D mm gear motors. Pololu 1995
The kit uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor shaft. The sensors operate from 2.7 V to 18 V and provide digital outputs that can be connected directly to a microcontroller or other digital circuit. Compatible with all of the dual-shaft micro metal gearmotors we carry, including the HPCB versions. Pololu 3081
DC motor with 1:84 planetary gear with a supply voltage from 6 to 24 V and a rotational speed of 140 RPM. Maximum current consumption up to 1.3 A. SparkFun ROB-15277