Module with a 3-axis MMC5983MA mega-meter. Equipped with a Qwiic connector, it communicates via the I2C interface. SparkFun SEN-19921

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252

TSL2585 sensor breakout for ambient light measurement, UVA detection in the 315–400nm range and light flicker sensing. It provides Photopic, IR and UVA channels, programmable gain up to 4096×, up to 20-bit resolution and I2C communication through STEMMA QT / Qwiic connectors. Adafruit 6524

Ultrasonic distance sensor with a measuring range of 2 to 400 cm. Communicates via a standard interface (Echo, Trigger) or I2C bus. SparkFun SEN-24805

A module with a temperature and humidity sensor based on the AHT20 system. Equipped with a Gravity connector, it communicates via the I2C interface. DFRobot SEN0528

TMAG5273 Hall sensor module dedicated to detecting the presence, strength and direction of a magnetic field in three dimensions. It uses communication via the I2C interface and Qwiic connectors. SparkFun SEN-23880

Gravity: DS18B20 Temperature Sensor is a module with a temperature sensor compatible with Arduino boards. The module can be supplied with 3.3-5V voltage and measures the temperature in the range -55 ~ 125 ° C. DFRobot DFR0024

Waveshare Photo Interrupter Sensor is an IR optical sensor module with Schmitt trigger and a signaling diode allowing the construction of an incremental encoder. Waveshare Photo Interrupter Sensor

The temperature and humidity sensor with RS485 Modbus interface is a precise measuring device, ideal for industrial automation systems, easily integrated thanks to the Modbus RTU protocol. Mounted on a DIN rail, it measures temperature from -40°C to 80°C and humidity up to 100% RH, providing reliable data in harsh environmental conditions.

Suitable for outdoor applications such as car reversing sensors, security alarms, industrial inspection, etc. SEN0207

Module with 9-axis IMU ICM-20948 sensor. The system is an integrated 3-axis accelerometer, gyroscope and magnetometer and a digital motion processor DMP (Digital Motion Processor). Communication via I2C. Pimoroni PIM448

Module with PIR S16-L221D motion sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020353

A modern current sensor combining the Hall effect with an inductive coil, which allows for precise measurements of both the DC and AC components up to 5 MHz. Thanks to its lightning-fast response time and low path resistance, it is perfect for motor control systems, power converters and protection systems. Pololu 5230

Module with BME680 sensor for measuring the concentration of volatile organic compounds (VOC), pressure, temperature and humidity. I2C or SPI communication. DFRobot SEN0375

Compact module for bidirectional current measurement using the galvanically isolated Allegro ACS37200LLXTR-200B3 Hall-effect sensor. It provides a ±200 A range, 150 kHz bandwidth, response time below 4 µs, and an extra-low current path resistance of approximately 0.05 mΩ. Pololu 5782

Precise solar radiation intensity sensor in the range from 400 to 1100 nm, communicating via Modbus-RTU (RS485) and resistant to harsh conditions thanks to the aluminum housing class IP67. High accuracy (±5%), fast response time (≤10 s) and resistance to dirt make it ideal for monitoring photovoltaics, environmental research and meteorology. DFRobot SEN0640

Compact module for bidirectional current measurement using the galvanically isolated Allegro ACS37200LLXTR-100B5 Hall-effect sensor. It provides a ±100 A range, 20 mV/A sensitivity, 150 kHz bandwidth, and a response time below 4 µs. Pololu 5783

Precise sensor measuring UV radiation in the range of 240 to 370 nm, directly outputting UV index value (0-11) and hazard level (1-5). Thanks to I2C and UART interface support and compact design, it is ideal for environmental monitoring, health protection and optimization of photovoltaic installations. DFRobot SEN0636

Current measurement module with the galvanically isolated Allegro ACS37200LLXTR-200B3 Hall-effect sensor. It provides a ±200 A bidirectional range, 6.6 mV/A sensitivity, 150 kHz bandwidth, and a response time below 4 µs. The large carrier board facilitates high-current connections. Pololu 5792

Current measurement module using the galvanically isolated Allegro ACS37200LLXTR-100B5 Hall-effect sensor. It provides a ±100 A bidirectional range, 150 kHz bandwidth, response time below 4 µs, and an extra-low current path resistance of approximately 0.05 mΩ. Pololu 5793