Category: Main categories

RGB LCD display module with 1.8 "diagonal, 128 x 160 pixel resolution, SPI interface, LED backlight.

E-Ink display module (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller.   Waveshare 12956

Volatile gas sensor module, including LPG, natural gas, natural gas

PLA filament in Lipstick Red color with 1,75 mm diameter and 1 kg net weight, manufactured by Prusa Research with ±0,02 mm diameter tolerance. Spool with NFC tag enables automatic material recognition in compatible 3D printers. Prusa Research

Set of two HT140-4.0KS tips compatible with the SEQURE HT140 hot tweezers for soldering and removal of SMD components. Flat chisel-shaped tips with a 4.0 mm working width provide even heating of solder pads and high precision during electronic assembly and service work. SEQURE HT140-4.0KS

OLED display 128x64 pixels, white characters / black background, 1.3-3V power supply, SSD1306 or SH1106G controller, communication via I2C and SPI interfaces, PARALLEL WHITE display color, working temperature from -40 to +70, ext. CAP

OLED display resolution 128x32 pixels, yellow letters on a black background (yellow), 3V power, SSD1306 driver, communication via SPI interface, working temperature from -40 to +70.

LoRa MESH Radio Module is a radio module with an operating frequency of 868MHz. Communication with the module takes place via the UART serial interface. It has a range up to 3km. It is supplied with voltage in the range of 3.3-5V. DFRobot TEL0117

Transparent case designed for micro:bit educational modules. Compatible with LEGO. DFRobot FIT0533

Set of 5 miniature LED Sequin modules with a Royal Blue LED in a 1206 package and a 100 Ω resistor. Designed for wearable electronics and e-textile projects, powered from 3 - 6 V and controllable via a microcontroller or directly from a battery. Adafruit 1757

Range finder with a measuring range up to 12m. The current consumption is up to 120mA and the supply voltage 4.5 ... 6V. Communication via the UART interface. DFRobot SEN0259

Euro (figure-8) power cable CEE 7/16 to IEC 320 C7, 3 m length, designed for powering RTV and IT equipment equipped with a C8 inlet. Rated current 2.5 A, 0.5 mm conductor, black plastic insulation. Lanberg CA-C7CA-10CC-0030-BK

Module with red LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0021-R

Module with blue LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0021-B

ual MAX14870 Motor Driver is a dual DC motor driver compatible with the Raspberry Pi standard that allows you to control two DC motors with 4.5 ... 36V continuous current of 1.7A. Pololu 3758

Dual MAX14870 Motor Driver is a dual DC motor controller compatible with the Arduino standard that allows you to control two DC motors with 4.5 ... 36V continuous current of 1.7A. Polol 2519

The X-NUCLEO-IHM17M1 is a low voltage three-phase brushless DC motor driver expansion board based on the STSPIN233 for STM32 Nucleo. It provides an affordable and easy-to-use solution for the implementation of portable motor driving applications such as thermal printers, robotics and toys

2x1.2A DC Motor Driver is a dual controller of DC motors powered with 2.5 ... 12V voltage with a maximum current consumption of 1.2A (3.2A peak) per channel. DFRobot DRI0044

Love to Code Chibi Scope Display Accessory

I2C BME680 Environmental Sensor is a gas, pressure, temperature and humidity sensor in one MEMS housing. The module is supplied with 3.3-5V, for communication the I2C or SPI interface is used. DFRobot SEN0248