![USB-CAN-A - USB - CAN adapter](https://kamami.pl/74381-large_default/waveshare-23635-usb-to-can-adapter-model-a-stm32-chip-solution-multiple-working-modes-multi-system-compatible.jpg)
![USB-CAN-A - USB - CAN adapter](https://kamami.pl/74381-large_default/waveshare-23635-usb-to-can-adapter-model-a-stm32-chip-solution-multiple-working-modes-multi-system-compatible.jpg)
zł80.77 tax excl.
USB-CAN adapter with support for CAN2.0A and CAN2.0B standards. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers. Waveshare USB-CAN-A
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
USB-CAN adapter in the form of a small device with a USB type A connector in the shape of a flash drive. It allows communication via CAN bus between a computer and industrial equipment for testing, development or data analysis. It supports CAN2.0A (standard frame) and CAN2.0B (extended frame) standards with CAN transmission rates ranging from 5Kbps to 1Mbps. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers.
The device can operate in one of four operating modes: normal mode, loopback mode, silent mode, silent loopback mode. This provides great flexibility and versatility of operation. It supports various modes of sending and receiving data, including as a single frame, multiple frames, manual, regular and cyclic sending. It can be configured to receive data only from a specific ID or specify an ID to automatically respond to data.
The module is compact in size and easy to use. It is based on the STM32F103 microcontroller and is equipped with surge protection. It can be used for development and integration into various industrial communication and intelligent control applications that require CAN bus communication. Full documentation and usage examples are available on the product page.
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
2-channel USB-CAN adapter with CAN protocol analyzer function. Dedicated to industrial applications. Waveshare USB-CAN-B
KAmod CAN-TXRX is a CAN bus transceiver with the MCP2542FD system, compatible with the CAN 2.0 and CAN FD standards, enabling sending and reading data with the serial interface voltage level adjustable in the range of 1.7...5 V, equipped with protections and LEDs signaling action
Industrial server with a CAN, RS485 and Ethernet port that allows communication between CAN devices and the network server. It has built-in 2 CAN channels, 1 Ethernet port and a TCP/IP stack. It is enclosed in a metal housing with an industrial design. Waveshare 2-CH-CAN-TO-ETH
No product available!
An extensive CAN to Ethernet converter adapted to difficult industrial conditions. It supports two CAN interfaces, one Ethernet interface and a TCP/IP protocol stack. It also has one RS485 serial port. USR-CANET200
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
No product available!
Converter with a built-in microcontroller (MCU) and a CAN transceiver system. It can work with devices with an operating voltage of 3.3 V via goldpin connectors with a pitch of 2.54 mm. The converter facilitates the design and prototyping of devices based on the CAN bus. Waveshare WS-TTL-CAN
USB - CAN converter module. It allows the device to be connected to a computer (USB) or microcontroller (UART) via the CAN bus. USB CAN CONVERTER (UCCB)
No product available!
UART-CAN converter module based on the TJA1050 transceiver system. It allows for communication, for example, of a microcontroller via the CAN bus
CAN transceiver module based on the TJA1051T/3 chip. Allows you to connect a board with native CAN support (the transceiver will convert 3V signals into differential CAN signals) to a network of devices. Adafruit 5708
2-channel USB to CAN/CAN FD adapter with CAN protocol analyzer function. Supports decoding of CAN 2.0A, CAN 2.0B, ISO11898-1 and CAN FD V.1.0 standards. Dedicated to industrial applications. Waveshare USB-CAN-FD
I2C-CAN converter using the MCP2551 and MCP2515 systems and the ATmega168PA microcontroller. The module uses the I2C bus and the Grove connector for communication. Seeed Studio 113020111
Communication module with CAN-UART converter and USB 1.0 interface. It supports CAN 2.0 protocol and supports SLCAN. It is operated using AT commands. DFRobot TEL0150
2-channel USB-CAN adapter with CAN protocol analyzer function. Dedicated to industrial applications. Waveshare USB-CAN-B
TTL/CAN-USB converter dedicated to distance sensors TF03, TF02 and TFmini with TTL/CAN interface. Comes with a miniUSB cable. Benewake TTL/CAN to USB converter
CAN module based on the SN65HVD230 system, allows you to connect a microcontroller with a CAN bus interface
RS232/485/422 to CAN converter enabling conversion and communication between RS232, RS485, RS422 interfaces and the CAN interface. It supports the Modbus RTU protocol, has numerous built-in protections, and the metal housing facilitates installation in an industrial environment. Waveshare RS232/485/422 TO CAN
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
USB-CAN adapter with support for CAN2.0A and CAN2.0B standards. It can work with Windows and Linux systems, including Raspberry Pi and Jetson Nano minicomputers. Waveshare USB-CAN-A