Cytron MD20A - DC motor driver
ID: 576758
5906623476022
zł91.91
Tax included
zł74.72 tax excl.
Single-channel DC motor controller that allows the motor to be controlled with a voltage range of 6-30V and a current of up to 20A. Allows engine speed control using PWM signals. MD20A cytron
Description
Cytron MD20A is a motor controller that allows you to control the speed and direction of the DC motor with a voltage in the range of 6-30 V. Based on MOSFET transistors so it can control current up to 20 A without additional cooling. The module can be controlled via PWM and DIR inputs. Thanks to the input logic voltage range from 1.8 V to 12 V, it is compatible with a wide range of controllers.
Embedded test buttons and engine output LEDs allow functional testing of the motor controller in a quick and convenient way without connecting the controller.
Attention!
Power input does not have reverse-voltage protection. Connecting the battery in reverse polarity will damage the motor driver instantaneously.Features
- Bidirectional control for one brushed DC motor
- Operating Voltage: DC 6V to 30V
- Maximum Motor Current: 20A continuous, 60A peak
- Buttons for quick testing
- LEDs for motor output state
- PWM and DIR inputs
- Inputs compatible with 1.8V, 3.3V, 5V and 12V logic
- PWM frequency up to 20kHz
- Compatible with sign-magnitude and locked-antiphase PWM operation
- Overcurrent protection with active current limiting
- Temperature protection
- Undervoltage shutdown
- Dimension: 86 x 52 mm
Exmaple connection
Kit contains
- MD20A module
- 4 x PCB Spacer
576758
Data sheet
- Output current
- 20 A
- Number of channels
- 1
- Supply voltage min
- 6 V
- Supply voltages max
- 30 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The board is compatible with Arduino, based on the ATmega328P microcontroller from the AVR family, 14 I/O lines, 6 PWM channels, 6 analog inputs are available to the user. The CH340G chip communicates via a USB interface. In addition, it has 12 LEDs, a programmable button and a embedded buzzer. Cytron Uno Maker
zł41.14
24h
Available quantity: 4
Available
Overlay compatible with Raspberry Pi Zero, Zero W, Zero WH, 1A+, 3A+, 3B, 3B+, 4B. Includes LEDs, buttons, USB-UART converter (USB connector) and buzzer. Cytron Maker pHAT
zł57.34
24h
Available quantity: 9
Available
Dual DC motor controller with voltage from 2.5 to 9.5V with 1A continuous current per channel. Has an embedded voltage regulator. Cytron Maker Drive
zł17.84
24h
Available quantity: 9
Available
Module with five reflection sensors. It has digital and analogue outputs. Thanks to the embedded EEPROM memory, it enables easy sensor calibration. Cytron Maker Line
zł46.90
Delivery date unknown
No product available!
Single-channel DC motor controller enabling motor control with voltage in the range of 7-30V and current up to 10A. The set has a potentiometer and a direction switch. Cytron MD10_POT
zł54.49
24h
Available quantity: 45
Available
Other products in the same category (16)
Dual H-Bridge motor driver board, 2A, 36V max, L298N, RoHS
zł12.60
24h
Available quantity: 29
Available
A two-channel DC motor controller with a UART TTL interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. Board with connectors for assembly. Pololu 5067
zł119.21
4 weeks
No product available!
Pololu Jrk 21v3 USB Motor Controller with Feedback (Fully Assembled)
zł324.70
24h
Available quantity: 1
Available
This board allows for simultaneous control of two motors with full direction and stopping control, ideal for robotic buggies and educational vehicles. It features built-in short circuit, overload, and overheat protection, as well as a stabilized 3V output to power the micro:bit. The Edge Connector and additional pins allow for easy connection of sensors, switches, and accessories, expanding the project\'s functionality. Programming is supported by dedicated MakeCode blocks and support for the Kitronik 5698 Python.
zł61.38
24h
Available quantity: 2
Available
Two-channel driver of direct current (DC) motors with a working voltage from 7 to 30 V and a maximum continuous current of 10 A. It can be controlled by a PWM signal or by buttons. Cytron MDDRC10
zł174.35
24h
Available quantity: 3
Available
Single-channel DC motor driver with an operating voltage from 8 to 28 V and a continuous current up to 160 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDS160A
zł1,162.14
4 weeks
No product available!
2-channel brush motor controller module with PWM signal mixing function. It allows you to control two DC motors with a current consumption of up to 5 A per channel
zł43.98
4 weeks
No product available!
DC motor driver that allows you to control the movement of three drives using the I2C interface. Board with soldered connectors. Pololu 5033
zł226.36
24h
Available quantity: 1
Available
Module with 2-channel DC motor driver DRV8833 designed to work with the Raspberry Pi Pico. It can work with a voltage from 2.7 to 10.8 V and a current of up to 1.2 A. Pimoroni PIM617
zł57.27
24h
Available quantity: 2
Available
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, A+, or Pi 2 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Pololu 2753
zł56.83
24h
Available quantity: 1
Available
Two-channel driver of direct current (DC) motors with an operating voltage from 6 to 30 V and a maximum continuous current of 20 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MDD20A
zł138.36
24h
Available quantity: 4
Available
The controller enables to supply the motors with voltage in the range of 10-47V and power consumption in continuous operation of 1.7A (4.5A peak) for each channel in dual or 3.4A mode (9A peak) in single channel mode. Pololu 2999
zł56.09
24h
Available quantity: 4
Available
Pololu Simple High-Power Motor Controller 18v25
zł827.97
4 weeks
No product available!
Pololu Dual G2 High-Power Motor Driver 18v22 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be powered with 6.5-30V and draw up a maximum current of 22A. Pololu 3754
zł605.05
4 weeks
No product available!
The power module together with the engine controller has been specially created for the Romi Chassis chassis. With its help, we will supply all components of our construction and we will be able to control the engines responsible for the movement of the chassis. Pololu 3543
zł132.18
24h
Available quantity: 1
Available
Pololu G2 18v15 High Power is a miniature DC motor controller. Power supply for the controller: 6.5 ... 30 V. Current efficiency of the module: 15 A. The module has protection against back voltage and overvoltages. Pololu 1363
zł551.54
24h
Available quantity: 1
Available
Single-channel DC motor controller that allows the motor to be controlled with a voltage range of 6-30V and a current of up to 20A. Allows engine speed control using PWM signals. MD20A cytron