Best sellers

A set of 100 M2.5 screws with a length of 8mm with Philips head

A set of 10 M3 screws with a length of 12mm with Philips head

A set of 10 M2.5 screws with a length of 10mm with Philips head

A set of 20 M2.5 screws with a length of 10mm with Philips head

A set of 100 M2.5 screws with a length of 10mm with Philips head

A set of 20 M3 screws with a length of 10mm with Philips head

A set of 100 M3 screws with a length of 10mm with Philips head

A set of 20 M3 screws with a length of 8mm with Philips head

A set of 100 M3 screws with a length of 8mm with Philips head

A set of 100 M3 screws with a length of 12mm with Philips head

COM-09181 - Big Dome Push Button - Red

Linear solenoid with a nominal operating voltage of 36 V. Allows for linear motion to move elements or control switches and levers. SparkFun ROB-10391

Practical cover that protects XT60 connectors from dust, damage, and accidental short circuits. Increasing safety and connector durability.

A set of metal handles to build a platform powered by micro servos. It allows you to create a movable stand, e.g. for a camera. SparkFun ROB-10335

Programmable coin acceptor with memory for 6 types of coins. It uses the thickness, diameter and fall time of the coins for identification. Programming is done using buttons and a 7-segment display on the side of the device. SparkFun COM-11636

This module provides precise, galvanically isolated current measurement within a range of ±30 A and voltage up to 480 VRMS, providing RMS, instantaneous, and active, reactive, and apparent power readings. Equipped with an I²C interface, 4-pin JST SH connectors, and 2.54 mm pins, it allows for easy integration with Qwiic, STEMMA QT, and standard microcontrollers. Configuration stored in EEPROM allows for defining address and overload thresholds. The sensor offers three voltage measurement ranges (120 V - default, 240 V, 480 V RMS) and the ability to detect overvoltages. Built-in protection and low conduction resistance ensure safe and accurate measurements. The version comes with soldered screw terminals. Pololu 5411

Programmable coin acceptor with memory for 3 types of coins. It uses the thickness, diameter and fall time of the coins for identification. Programming is done using buttons and a 7-segment display on the side of the device. SparkFun COM-11719

COM-11274 Button, 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch

AVR, 16kB Flash, 1kB RAM, 512B EEPROM, ADC, UART, SPI, DIP40, RoHS

ARM Cortex-M4 CPU, 2048kB Flash, 256kB RAM, Ethernet, Encryption, Camera, LCD-TFT, USB OTG FS+HS, 2xCAN, 4xUART, 3xI2C, 6xSPI, ADC, DAC, STM, LQFP144, RoHS