Dual Ethernet 1G / 2.5G Base Board Kit for Raspberry Pi CM5 with Enclosure and Power Supply - Waveshare 33060
ID: 1202709
zł269.59
Tax included
zł219.18 tax excl.
Dual Ethernet 1G / 2.5G base board designed for Raspberry Pi Compute Module 5, featuring two RJ45 Ethernet ports (Gigabit Ethernet and 2.5G Ethernet), support for dual 4K display outputs, dual MIPI interfaces, and a 40-pin GPIO header. The kit includes a metal enclosure, cooling fan, and power supply. Waveshare CM5-DUAL-ETH-BOX-A (EU)
Description
CM5-DUAL-ETH-BOX-A (EU) is an advanced base board designed for use with Raspberry Pi Compute Module 5. The design focuses on wired networking and provides two independent RJ45 Ethernet ports: Gigabit Ethernet 1000M and 2.5G Ethernet 2500M, enabling networking applications, edge systems, and industrial installations that require stable wired connections.
The board supports two HDMI outputs with simultaneous dual 4K display operation, as well as two 4-lane MIPI interfaces intended for connecting DSI displays or CSI cameras. The M.2 M Key connector allows installation of NVMe SSDs in a wide range of form factors, delivering higher read and write performance compared to TF cards.
Rich Interface Set
Onboard features include a Raspberry Pi–compatible 40-pin GPIO header, one USB 3.2 Gen1 port and two USB 2.0 ports, a TF card slot for Compute Module 5 Lite variants, and onboard EEPROM and encryption chips. Power is supplied via a wide 7–36 V DC input range. The BOX-A variant is delivered with a metal enclosure equipped with a cooling fan, supporting heat dissipation in continuous-operation applications.
Unlike versions with cellular communication support, this board does not provide an M.2 B Key connector or SIM slot and does not support 4G / 5G modules. The solution targets networking infrastructure, industrial automation, and embedded systems where wired data transmission and high Ethernet throughput are critical.
The kit includes a metal enclosure and a power supply.
Precise Cut-outs with Clear Labeling
Controller Board Components
- CM5 socket - Suitable for all variants of Compute Module 5
- 40PIN GPIO header - Suitable for connecting to various HAT/HAT+ modules
- Programming - used for eMMC burning
- PSW power button - Long press to force power off, short press to soft power off or on
- BOOT button - Press before powering on and release it after powering on to enter burning mode
- STAT LED - Dual LED indicators
- DC power jack
- DC-DC power chip
- M.2 M KEY - Supports 2280/2260/2242/2230 NVMe Solid State Drives or Al modules
- M.2 LED - keeps blinking when NVMe drive reading/writing
- MIPI Interfaces - for connecting to DSI displays or CSI cameras
- HDMI ports - Supports dual 4K outputs
- RTC battery header - for connecting an external RTC battery to maintain real-time clock operation
- USB 2.0 HUB chip
- USB 2.0 ports
- USB 3.2 Gen1 port - supports up to 5 Gbps reading/writing speed
- 2500M Ethernet RJ45 port - supporting 10M/100M/1000M/2500M network connections
- 1000M Ethernet RJ45 port - supporting 10M/100M/1000M network connections
- FAN header - for connecting the cooling fan, 5V, 4PIN JST-SH PWM fan connector
- EEPROM and encryption chip
- USB to 2500M Ethernet chip
- TF card slot - for connecting a TF card with pre-burnt image (only lite version)
- Other function pins - Hardware disable function, write protection and chip address selection
- IO-VREF selection - CM5 IO logic level: 3.3V (default) or 1.8V
Features
- Module Support
- Compute Module socket: compatible with all Raspberry Pi Compute Module 5 variants
- Supported versions: Lite and eMMC
- Networking
- Ethernet: 1 × RJ45 1000M
- Ethernet: 1 × RJ45 2500M
- Video and Camera Interfaces
- HDMI: 2 × HDMI, dual 4K display support
- MIPI: 2 × 4-lane MIPI interfaces (22-pin, 0.5 mm pitch)
- USB
- USB 3.2 Gen1: 1 × Type-A, up to 5 Gb/s
- USB 2.0: 2 × Type-A
- Storage and Expansion
- M.2 M Key: supports NVMe SSDs 2230 / 2242 / 2260 / 2280
- TF card slot: for Compute Module 5 Lite variants
- Control and I/O
- GPIO: Raspberry Pi 40-pin header
- PSW power button
- BOOT button for eMMC programming
- Fan header: 5 V, 4-pin JST-SH PWM
- RTC backup: external battery header
- IO-VREF selection: 3.3 V or 1.8 V
- Power
- DC input: 7–36 V
- Onboard DC-DC power circuitry
- Mechanical Parameters
- Board dimensions: 109.0 × 91.5 mm
- Enclosure dimensions: 114.6 × 91.5 × 32.9 mm
Kit includes
- 1 × CM5-DUAL-ETH-BASE base board
- 1 × metal enclosure (top and bottom parts)
- 1 × cooling fan
- 1 × power supply (EU plug)
- 1 × mounting hardware set
1202709
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Nano Base Board (A) to miniaturowa, ale w pełni funkcjonalna płytka bazowa do Raspberry Pi Compute Module 5, zaprojektowana z myślą o integracji w kompaktowych urządzeniach. Oferuje wszystkie kluczowe interfejsy, w tym USB 3.2, podwójne MIPI, GPIO 40-pin, a także wsparcie dla zasilania i chłodzenia, co czyni ją wszechstronnym rozwiązaniem do projektów przemysłowych, IoT i systemów wbudowanych.
zł57.07
24h
Available quantity: 3
Available
CM5-PoE-BASE-A is a functional base board for the Raspberry Pi Compute Module 5, equipped with PoE power supply and a rich set of peripheral interfaces. With support for NVMe drives, MIPI cameras and displays, and two HDMI ports, it is well-suited for industrial projects, AI systems, and multimedia solutions. Ideal for prototyping and integration into finished products.
zł162.02
4 weeks
No product available!
CM5-NANO-B is a base board for Raspberry Pi Compute Module 5, offering full functionality in a compact form. With support for high-speed interfaces such as USB 3.2, HDMI 4K, PCIe, and MIPI, it serves as an ideal platform for prototyping and deploying embedded systems. The ability to integrate with DSI/CSI, use external cooling, and connect to a Gigabit Ethernet network makes the board well-suited for industrial, IoT, and consumer applications. Variant suitable for CM5 Lite and eMMC versions – the Compute Module 5 itself must be purchased separately.
zł73.28
4 weeks
No product available!
CM5-IO-BASE-B is an advanced IO board for the Raspberry Pi Compute Module 5, offering a rich set of communication interfaces and encryption support. With its compact design and expansion options, it is ideal for industrial applications, multimedia projects, and as a base for building miniature computers.
zł91.91
24h
Available quantity: 1
Available
PoE HAT (H) is a high-efficiency power supply add-on for Raspberry Pi 5 and Compute Module 5, enabling data transmission and power delivery over a single Ethernet cable in accordance with the IEEE 802.3af/at standard. Thanks to the use of an isolated switching converter and compatibility with the official enclosure, it is suitable for stable and compact integration in network, automation, and remote device management projects.
zł90.20
4 weeks
No product available!
CM5-DUAL-ETH-MINI is a compact base board with a dual Gigabit Ethernet interface, designed for the Compute Module 5. It enables the development of routers, network gateways, and industrial systems with high network throughput and a flexible GPIO interface. Thanks to its rich set of connectors and small dimensions, it is suitable for both prototyping and integration into final products.
zł96.90
4 weeks
No product available!
CM5-DUAL-ETH-MINI-BOX (EU) is a compact development kit for the Raspberry Pi Compute Module 5 with dual Gigabit Ethernet ports, enabling use in network systems, routers, IoT devices, and edge computing solutions. The aluminum enclosure with integrated heatsinks provides efficient cooling, while the network ports and GPIO allow integration with various industrial and embedded systems. Raspberry Pi Compute Module 5 not included. Raspberry Pi Compute Module 5 not included.
zł197.00
4 weeks
No product available!
CM5-IO-BASE-BOX-A (EU) offers a complete hardware platform for launching projects based on the Raspberry Pi Compute Module 5. With HDMI ports supporting 4K video, high-speed USB 3.2 connectors, MIPI outputs, and a PCIe interface, the board enables flexible use in embedded applications, automation systems, and edge computing prototyping. The enclosure and fan provide proper cooling, while mounting options facilitate integration in industrial environments.
zł170.47
24h
Available quantity: 2
Available
CM5-IO-BASE-BOX-B (EU) is a complete hardware platform for the Raspberry Pi Compute Module 5, including a base board, a metal enclosure with ventilation holes and a fan, and a 27 W power supply. It supports advanced features such as dual 4K output, high-speed data transfer via USB 3.2, and network connectivity via Gigabit Ethernet. With MIPI, GPIO, M.2, and TF connectors, as well as wall or DIN rail mounting options, it is suitable for embedded projects, industrial systems, and edge computing solutions. Raspberry Pi Compute Module 5 not included.
zł190.00
24h
Available quantity: 1
Available
CMX-ADAPTER is a protection board dedicated to Raspberry Pi CM4 and CM5 modules, designed for intensive use and repeated connection with base expansion boards. It facilitates integration and protects connectors from mechanical damage.
zł32.09
24h
Available quantity: 1
Available
CM5-to-Pi5 adapter enables building a system based on the Compute Module 5 with functionality similar to the Raspberry Pi 5, while offering additional audio capabilities and flexibility of mounting and expansion, especially in embedded and industrial applications.
zł97.50
24h
Available quantity: 2
Available
reComputer R1113-10 is an IoT gateway and industrial controller based on Raspberry Pi CM4 with 2 GB RAM and 8 GB eMMC, equipped with RS485, RS232, DI, DO, and Ethernet interfaces with PoE support. It supports wireless communication and edge AI, making it suitable for automation, smart city, and monitoring systems.
zł780.34
4 weeks
No product available!
reComputer R1035-10 is an industrial IoT computer based on Raspberry Pi CM4 with 8 GB RAM and 32 GB eMMC, equipped with isolated RS485 interfaces, two Ethernet ports with PoE support, and an M.2 NVMe slot. With AI support and wireless communication, it is suitable for automation systems, fleet management, and edge AI applications.
zł1,173.54
4 weeks
No product available!
reComputer R1013-10 is an industrial IoT computer with Raspberry Pi CM4, 2 GB RAM and 8 GB eMMC, offering 3 RS485 ports, two Ethernet ports with PoE support, and an M.2 NVMe slot. With edge AI support and extensive communication options, it is suitable for building automation systems, IoT, and fleet management.
zł717.91
4 weeks
No product available!
reComputer R1024-10 is an IoT computer with Raspberry Pi CM4 equipped with 4 GB RAM and 16 GB eMMC, offering isolated RS485 ports, two Ethernet interfaces with PoE support, and an M.2 NVMe slot. With edge AI support and extensive communication options, it is suitable for building automation, fleet management, and industrial IoT applications.
zł855.27
4 weeks
No product available!
reComputer R1025-10 is an IoT computer with Raspberry Pi CM4 and 4 GB RAM, equipped with 32 GB eMMC and an M.2 NVMe slot. With isolated RS485 ports, two Ethernet interfaces, PoE support, and optional wireless communication modules, it provides a reliable solution for industrial automation, BMS systems, and edge AI applications.
zł962.73
4 weeks
No product available!
Dual Ethernet 1G / 2.5G base board designed for Raspberry Pi Compute Module 5, featuring two RJ45 Ethernet ports (Gigabit Ethernet and 2.5G Ethernet), support for dual 4K display outputs, dual MIPI interfaces, and a 40-pin GPIO header. The kit includes a metal enclosure, cooling fan, and power supply. Waveshare CM5-DUAL-ETH-BOX-A (EU)