ESP32-S3 development board with 1.8″ AMOLED touch display, battery 368×448 - Waveshare 29957

ESP32-S3-Touch-LCD-4B is a ready-to-install development board with ESP32-S3 and a 4" touch screen, intended for use in building automation, HMI systems and voice interfaces. The compact 86×86 mm format facilitates integration in wall enclosures and control panels.

ESP32-S3 development board equipped with a 32-bit dual-core Xtensa 32-bit LX7 processor. It is equipped with a 1.14-inch IPS LCD display with a resolution of 240 x 135 pixels and a micro SD card slot. It has the format of a USB dongle with a type A connector, which makes it convenient and handy to use. Waveshare ESP32-S3-GEEK

ESP32-C6-Touch-LCD-1.47 is a development board with a touch IPS display and ESP32-C6 chip, providing Wi-Fi 6, Bluetooth 5, and a rich set of peripherals. The standard version without pre-soldered pin headers allows flexible integration into IoT, HMI, and mobile applications.

M5Stack series development kit equipped with WiFi and Bluetooth ESP32 module. It will work in IoT-related projects, as a STEM educational module or in Smart Home devices. M5Stack K010

Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. Adafruit 5398

M5Stack series development board equipped with ESP32-S3 WiFi module. It will work well in projects related to IoT, as a STEM educational module or in Smart Home devices. M5Stack S007

ESP32-C5-DevKitC-1-N8R4 is a development board with the ESP32-C5-WROOM-1 module, supporting WiFi 6, BLE, Zigbee, and Thread. Equipped with 8 MB Flash and 4 MB PSRAM, it is suitable for IoT projects and automation systems, offering extensive communication capabilities and easy integration with sensors and peripheral modules.

The development board allows you to easily use the capabilities of ESP32 (Wi-Fi + Bluetooth BLE) from Espressif. There is a USB / UART converter on the board, and most of the GPIO line of the ESP-WROOM-32D module has been connected to pins with a pitch of 2.54mm. ESP32-DevKitC V4

Integrated circuit, combining Wi-Fi functionality and Bluetooth 4.2 BLE. Integrated 32-bit dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be supplied with 2.2V-3.6V. The system has a QFN48 (5x5mm) housing. ESP32-D0WD

Development kit with ESP32 WiFi and Bluetooth module and 0.96 "OLED display. It has a built-in Li-Pol charger module and a USB-UART converter function. ModOLEDESP32_V2.0_TTGO

Module with WiFi Espressif ESP32-S2. It integrates two regulators, SPI Flash memory, LiPo charging circuit and RGB diode. It is equipped with a STEMMA QT connector. Adafruit 4775

Crowtail – ESP8266 NodeMCU 2.0 is a universal WiFi module for IoT projects with a ready Crowtail interface, microUSB port, and Li-Po battery charging function. It works well in mobile and stationary applications based on Arduino IDE or NodeMCU Lua.

Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700

The ESP32-S3-LCD-1.9 board without a touch panel integrates the ESP32-S3R8 microcontroller, a 1.9" LCD display (170×320 px), and a set of peripherals such as a 6-axis IMU, TF card slot, and battery connector. This version includes an RGB WS2812 LED and enables the development of HMI applications, gesture control, motion recording, or interface creation using libraries such as LVGL. Thanks to compatibility with the Raspberry Pi Pico pin layout, the product is perfectly suited as a base for complex electronics and robotics projects.

ESP32-H2-DevKitM-1 is an advanced development board designed for building IoT devices communicating via Zigbee, Thread, Matter, and Bluetooth LE protocols. Thanks to its energy-efficient RISC-V microcontroller, integrated antenna, wide range of peripheral interfaces, and easy access to GPIO pins, the board is an excellent choice for smart home projects, distributed sensors, and battery-powered devices.

A small USB-UART TTL converter module based on the CH340 system with a USB type A connector. Designed for the ESP-01 and ESP-01S modules