Gravity: IO Expansion Shield - expansion board for DFRduino M0
ID: 569861
5902186313279
zł44.59
Tax included
zł36.25 tax excl.
The expansion board is designed for DFRduino M0 or Bluno M0 sets. The board has 31 GPIO pins (including 6 PWM and 6 ADC inputs), UART, I2C and SPI interfaces. The pins are color coded according to the Gravity standard. DFRobot DFR0412
Description
The expansion board is designed for DFRduino M0 or Bluno M0 sets. The board has 31 GPIO pins (including 6 PWM and 6 ADC inputs), UART, I2C and SPI interfaces. The pins are color-coded according to the Gravity standard, which makes it much easier to identify inputs and connect sensors. The module is powered by a screw connection with a voltage ranging from 7 to 23 V. There is also a connector for powering servos. A user manual is available on the product wiki page.
| 1. External power supply 7-23 V | 6. I2C |
| 2. Servo power supply 5-7 V | 7. SPI |
| 3. Reset | 8. Digital I/O |
| 4. UART | 9. Pin Marks |
| 5. Analog input |
Features
- External power: 7 to 23V
- 5 to 7V servo power connector
- 3-pin connectors (colored), compatible with Gravity
- GPIO: 31 digital pins (6 PWM ports, 6 analog ports)
- UART: 2
- I2C port: 1
- SPI port: 1
- Dimensions: 62 x 54 mm
569861
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 138
Available
Cables for evaluation boards, set of 10 pcs., yellow colour
zł5.61
24h
Available quantity: 40
Available
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
zł4.90
24h
Available quantity: 79
Available
Set of 10 pcs. Female-female connecting wires, 25 cm long. CAB_F-F (10-25 V)
zł5.50
24h
Available quantity: 57
Available
Other products in the same category (16)
Module with barcode and QR scanner. It allows you to read one-dimensional and two-dimensional codes and communicates via the I2C and UART interface. DFRobot SEN0486
zł176.69
24h
Available quantity: 3
Available
DC Micro motor module with metal gear with a gear ratio of 75:1. The motor is connected to the board containing the driver. DFRobot DFR0399
zł58.88
24h
Available quantity: 3
Available
The infrared distance sensor enables the detection of objects in the range from 3 to 50cm. The sensor has a digital output, the detection threshold is adjusted by a potentiometer. DFRobot SEN0164
zł32.79
24h
Available quantity: 1
Available
Module with distance sensor Sharp GP2Y0D810Z0F operating in the infrared band. It is powered with a voltage ranging from 2.7 to 6.2 V and has a digital output (Gravity connector). DFRobot SEN0042
zł50.97
24h
Available quantity: 2
Available
The MPX5700AP air pressure sensor with a measuring range from 15 to 700 kPa. It communicates via the I2C interface. DFRobot SEN0456
zł331.66
24h
Available quantity: 1
Available
DC Micro motor module with metal gear with a gear ratio of 30:1. The motor is connected to the board containing the driver. DFRobot DFR0399
zł42.96
24h
Available quantity: 3
Available
Audio Analyzer is a module with sound analyzer based on the MSGEQ7 system. It divides the sound into seven frequency bands, and then allows you to read the peak levels of each band. It allows you to measure the sound in the following frequencies: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz and 16kHz. DFRobot DFR0126
zł80.20
24h
Available quantity: 1
Available
VL53L0X ToF Laser Range Finder is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is supplied with 3.3 ... 5 V voltage and can measure up to 2 m. DFRobot SEN0245
zł65.19
4 weeks
No product available!
Contrast sensor module. It has two integrated operating modes: analog and digital. It has the ability to set the digital mode for color detection. DFRobot SEN0147
zł38.18
24h
Available quantity: 1
Available
Module with an analog MQ8 hydrogen sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0133
zł51.72
24h
Available quantity: 1
Available
Gravity: The high temperature sensor is a sensor based on the PT100 probe and adapted to very high temperatures (30-350 ° C). The module is powered by 3.3 ... 5.5V voltage. DFRobot SEN0198
zł72.46
24h
Available quantity: 2
Available
Set of 10 cables, 30 cm long, for digital sensors compatible with the Gravity standard. DFRobot FIT0011
zł39.84
24h
Available quantity: 2
Available
Module with an ozone detection sensor that performs measurements in the range of up to 10 ppm with a resolution of 0.01 ppm. The module is equipped with an I2C interface. DFRobot SEN0321
zł225.71
4 weeks
No product available!
Sensor that detects the concentration of ozone. Equipped with a factory calibrated probe. It communicates via the I2C interface, UART or analog output. DFRobot SEN0472
zł817.00
4 weeks
No product available!
TCS34725 RGB Color Sensor is a color sensor TCS34725 controlled by the I2C interface. It is powered by voltage in the range of 3.3 ... 5V and is intended for Arduino-compatible boards. DFRobot SEN0212
zł36.30
24h
Available quantity: 3
Available
Module with a 3-axis analog MMA7361 accelerometer. There are 3 Gravity connectors on the board (for each axis). The operating range of the sensor can be configured using a DIP switch. DFRobot DFR0143
zł67.45
24h
Available quantity: 1
Available
The expansion board is designed for DFRduino M0 or Bluno M0 sets. The board has 31 GPIO pins (including 6 PWM and 6 ADC inputs), UART, I2C and SPI interfaces. The pins are color coded according to the Gravity standard. DFRobot DFR0412