

zł872.75 tax excl.
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1500
The differential probe based on Micsig's advanced SigOFIT technology is a modern tool that is characterized by a very low noise level, excellent amplitude and frequency characteristics at high voltage and an advanced ability to reject common-mode signals. Thanks to these features, users can easily test high-frequency and voltage signals. The probe has a bandwidth limit of 5 MHz, which effectively eliminates high-frequency noise when measuring transistor switching frequencies in most switching power supplies. Additionally, the zero point calibration function allows you to zero the probe instantly. The probe also offers dual-range capability, improving signal-to-noise ratio and adapting to a variety of test requirements. The standard BNC connector allows operation with any oscilloscope, and the power supply from the USB port eliminates the need for additional power sources.
Additional features, such as an overvoltage alarm with a flashing LED and an out-of-range alarm, allow the user to quickly respond to possible problems. The DP probe also stands out for its compact and aesthetic design, much smaller than traditional differential probes. Moreover, it is characterized by excellent bandwidth uniformity, with amplitude fluctuations below 0.5 dB in the half-band range, even in the case of high frequencies, which guarantees high measurement precision. High input impedance and low capacitance minimize the loading effect, which greatly improves the accuracy of differential signal measurement.
The probe can be widely used for AC voltage measurements, high voltage insulation measurements, and the design of switching power supplies and power converters. It is a versatile and flexible tool useful both in an electronics workshop and in an industrial environment.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
A portable tablet oscilloscope with a 10.1 inch LCD display and a touch screen. It has four channels and has good measurement parameters: 300 MHz bandwidth, 2 GSa/s sampling rate and 220 Mpts memory buffer. Micsig TO3004
A portable oscilloscope for automotive applications with an 8-inch LCD display and a touch screen. It has four channels and has good measurement parameters: 100 MHz bandwidth, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig SATO1004 Plus
No product available!
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 300 MHz band, 2 GSa/s sampling rate and 280 Mpts memory buffer. Micsig STO2302C
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-150
No product available!
A probe tip with a 5000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 1 GHz frequency band. Micsig OP5000-1G
No product available!
A probe tip with attenuation factor of 2000X. Dedicated to Micsig probes from the SigOFIT series operating in the frequency band of 100MHz, 200MHz and 350MHz. Micsig OP2000-3
No product available!
High-voltage differential probe. It has good measurement characteristics: a bandwidth of 100 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8100
No product available!
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 500 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig MDP1505
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-2.8mm
Oscilloscope probe designed for the analysis of signals generated by the ignition coil in automotive engines. It is compatible with most digital oscilloscopes. Hantek HT25
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1502
BNC connector cable (adapter) to the "Alligator clip" connector. It allows you to conveniently connect the device, e.g. to an oscilloscope. Digilent (240-134)
A probe tip with attenuation factor of 5000X. Dedicated to Micsig probes from the SigOFIT series operating in the 500 MHz frequency band. Micsig OP5000-5
No product available!
BNC connector cable (adapter) for minigrabber clips. It enables the connection of the tested system with an oscilloscope
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-2.3mm
No product available!
Test probe tip with 20X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 350 MHz and 500 MHz frequency bands. Micsig OP20-5
No product available!
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP1200XS
No product available!
Cable (adapter) of a BNC connector to banana plugs. Allows convenient connection of a device to an oscilloscope, for example. BNC Q9
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP12000XS
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1500