OP100-5 - 100X tip for SigOFIT Micsig 500MHz probe
ID: 1197273
zł4,065.81
Tax included
zł3,305.54 tax excl.
A probe tip with attenuation factor of 100X. Dedicated to Micsig probes from the SigOFIT series operating in the 500 MHz frequency band. Micsig OP100-5
Description
The 100X attenuation probe tip is designed to extend the measurement range of Micsig high-frequency probes. It enables safe and accurate operation at high voltages, ensuring both safety and measurement precision. Thanks to its low input impedance, it minimizes the impact on the measured signal. Fully compatible with OIP500 probes, this tip is suitable for signal analysis up to 500 MHz, making it ideal for both laboratory and field use. Its compact design allows easy access to hard-to-reach measurement points.
Features
- Attenuation ratio: 100:1 @0dB ±50V, 10:1 @20dB ±5V
- Maximum operating voltage: ±1000Vpp
- Input impedance: 4.10MΩ || 2pF
- Compatible with OIP500 probes
- Adapter type: MMCX
1197273
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Insulated fibre-optic probe with a measurement range of up to 1250 V. Operates in a bandwidth of up to 500 MHz and can be connected to an oscilloscope via a BNC connector. Battery-powered. Micsig OIP500B
Delivery date unknown
No product available!
Other products in the same category (16)
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP3000XS
zł4,551.00
4 weeks
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1500
zł1,132.76
24h
Available quantity: 1
Available
High-voltage differential probe. It has good measurement characteristics: a bandwidth of 100 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8100
zł1,349.00
4 weeks
No product available!
BNC connector cable (adapter) to the "Alligator clip" connector. It allows you to conveniently connect the device, e.g. to an oscilloscope. Digilent (240-134)
zł52.64
24h
Available quantity: 2
Available
Oscilloscope probe with BNC plug with 100MHz bandwidth. Uni-T UT-P04
zł55.35
24h
Available quantity: 2
Available
The PP80B oscilloscope probe is a reliable tool for precise measurements, compatible with digital and analog oscilloscopes, offering a bandwidth of up to 80 MHz and the ability to select the attenuation factor. Hantek PP-80B
zł25.60
24h
Available quantity: 1
Available
The housing for the DSO138 oscilloscope allows for easy storage and mobile use of the device. It protects the PCB and any microcircuits on it from dirt or accidental damage.
zł14.90
24h
Available quantity: 7
Available
Oscilloscope probe designed to analyze signals generated by the ignition coil in car engines. It is compatible with most digital oscilloscopes. Hantek HT20COP
zł265.00
4 weeks
No product available!
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 500 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig MDP1505
Regular pricezł6,624.87zł5,399.00
24h
Available quantity: 2
Available
Probe for measuring direct and alternating current up to 100 A. It works in the 800 kHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100A
zł1,444.92
4 weeks
No product available!
A probe tip with a 5000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 1 GHz frequency band. Micsig OP5000-1G
zł5,146.47
4 weeks
No product available!
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 300 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig MDP1503
zł3,906.17
24h
Available quantity: 2
Available
A probe for measuring AC and DC currents up to 650 A. It operates in a bandwidth of up to 400 Hz and can be connected to an oscilloscope via a BNC connector. Hantek CC-650
zł475.00
4 weeks
No product available!
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is perfect for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP60XS
zł4,182.00
4 weeks
No product available!
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 1 GHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP1000P
zł112,990.00
4 weeks
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3002
zł1,902.91
24h
Available quantity: 1
Available
A probe tip with attenuation factor of 100X. Dedicated to Micsig probes from the SigOFIT series operating in the 500 MHz frequency band. Micsig OP100-5