CP2100A - current probe for Micsig oscilloscope
ID: 586605
5906623436873
zł1,461.29
Tax included
zł1,188.04 tax excl.
Probe for measuring direct and alternating current up to 100 A. It works in the 800 kHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100A
Description
Probe for measuring DC and AC current up to 100 A. Uses standard BNC interface and can be connected to an oscilloscope or a multimeter. It works in the 800 kHz band, has two measuring ranges: 10 and 100 A. The probe can work with manual or automatic regulation and is powered by the USB connector. It can be used in industry, automotive electronics, power supplies and inverters. Dedicated to Micsig devices.
Features
- Bandwidth: 800 kHz
- Rise Time: 437.5 ns
- Ranges: 10 A or 100 A.
- Sensitivity: 0.1V/A (10A), 0.01V/A (100A)
- Accuracy:
- 3% ± 50 mA (10A)
- 4% ± 50 mA (100 A, 500 mA to 40 Apk)
- 15% (100 A, 40 Apk to 100 Apk)
- Signal delay: ＜ 150 ns (10 A), ＜ 200 ns (100 A)
- Measurement range:
- 50 mA to 10 Apk (10 A)
- 1 A to 100 Apk (100 A)
- Maximum measured current:
- 100 Apk, 70.7 Arms (DC + ACpk)
- 200 Apk-pk, 70.7 Arms (AC)
- Maximum working voltage: CAT Ⅲ 300V, CAT Ⅱ 600V
- Maximum cable diameter: 13 mm
- Overload indicator: buzzer, lamp
- Power supply: USB 5V
Kit contains
- CP2100A current probe
- USB cable
586605
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A portable tablet oscilloscope with a 10.1 inch LCD display and a touch screen. It has four channels and has good measurement parameters: 300 MHz bandwidth, 2 GSa/s sampling rate and 220 Mpts memory buffer. Micsig TO3004
zł5,699.00
24h
Available quantity: 1
Available
A portable oscilloscope for automotive applications with an 8-inch LCD display and a touch screen. It has four channels and has good measurement parameters: 100 MHz bandwidth, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig SATO1004 Plus
zł3,756.17
24h
Available quantity: 1
Available
A portable Smart oscilloscope with an 8-inch LCD display and a touch screen. It has two measurement channels and has good measurement parameters: 300 MHz band, 2 GSa/s sampling rate and 280 Mpts memory buffer. Micsig STO2302C
zł4,386.35
24h
Available quantity: 1
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP700
zł1,195.19
Delivery date unknown
No product available!
The Micsig SATO2002 is a dual-channel tablet oscilloscope with a 200 MHz bandwidth, offering a maximum sampling rate of 1 GSa/s and a memory depth of 70 Mpts. Equipped with an 8-inch touchscreen LCD, it simplifies automotive diagnostics, including testing charging systems, ignition, and CAN and LIN networks
zł3,398.93
24h
Available quantity: 1
Available
Other products in the same category (16)
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 350 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP350P
zł49,999.00
4 weeks
No product available!
A probe tip with attenuation factor of 5000X. Dedicated to Micsig probes from the SigOFIT series operating in the frequency band of 100MHz, 200MHz and 350MHz. Micsig OP5000-3
zł3,874.19
4 weeks
No product available!
Oscilloscope probe with BNC plug with 100MHz bandwidth. Uni-T UT-P04
zł55.35
24h
Available quantity: 1
Available
A probe tip with a 5000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 1 GHz frequency band. Micsig OP5000-1G
zł5,146.47
4 weeks
No product available!
Test probe tip with 20X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 800 MHz and 1 GHz frequency band. Micsig OP20-1G
zł6,599.00
4 weeks
No product available!
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a 300 MHz frequency band and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3003
zł4,059.00
4 weeks
No product available!
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-2.3mm
zł47.90
24h
Available quantity: 4
Available
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is perfect for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP600XS
zł4,059.00
4 weeks
No product available!
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP12000XS
zł5,043.00
4 weeks
No product available!
High-voltage oscilloscope probe with BNC connector and 100:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 2 kV. Hantek T3100
zł92.69
24h
Available quantity: 5
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 150 MHz and the ability to measure voltage up to 3000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP3001
zł1,499.04
24h
Available quantity: 1
Available
Oscilloscope Probes (pair). 460-004
zł136.75
24h
Available quantity: 3
Available
Universal oscilloscope probe with BNC plug and 10:1 voltage divider. It has a frequency range of 60 MHz and allows you to perform measurements with a maximum voltage of up to 600 V.
zł47.75
24h
Available quantity: 4
Available
The Micsig DP series differential probe is based on advanced metal shielding technology. It offers a 100 MHz frequency bandwidth and the ability to measure voltages up to 7000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP7000
zł4,199.00
4 weeks
No product available!
Oscilloscope probe designed to analyze signals generated by the ignition coil in car engines. It is compatible with most digital oscilloscopes. Hantek HT20COP
zł237.49
24h
Available quantity: 4
Available
The Micsig CP3008 probe is designed for precise measurement of AC/DC currents in high-voltage and high-current circuits. It is used in the analysis of switching power supplies, power converters, inverters, and testing of devices with high current loads.
zł8,227.16
4 weeks
No product available!
Probe for measuring direct and alternating current up to 100 A. It works in the 800 kHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100A