Module with 5 V relay with a maximum switching current of 2 A. It communicates via the USB interface and does not require an additional power supply. Numato Lab USBPOWRL002

This BLDC motor controller, based on the Allegro A89301 chip, enables sensorless control over a wide voltage range from 5.5 V to 48 V and phase current up to 11 A without additional cooling. It supports four control modes: analog voltage, PWM signal, pulse frequency, and via an I²C interface with the ability to configure parameters and save settings to EEPROM. The Field-Oriented Control (FOC) algorithm ensures quiet and efficient operation, while built-in protection protects the system against short circuits, reverse polarity, and undervoltage. Pololu 5356

16-channel IO expander with 7 analog inputs. It communicates via the USB interface. Numato Lab GP160001

Module with 16 12 V relays with a load of up to 7 A. The board communicates via the Ethernet interface. Numato Lab 16ETHRL001

Module with 2 relays with a maximum switching current of 7 A. Equipped with the ATmega328P microcontroller, it can be programmed in the Arduino IDE. Numato Lab PRLY001

This compact module allows for convenient control of servos communicating via UART in half-duplex or full-duplex mode, making it suitable for a variety of robotic projects. Equipped with Molex connectors and additional pins, it allows for easy integration of popular servos, such as the LX-16A, as well as models from other manufacturers. The module offers high-current power output, ensuring stable operation of complex systems with multiple servos. Pimoroni PIM697

This module supports four servos with direct power supply ranging from 5-17V, allowing for the construction of high-power designs. The module features standard servo connectors and two analog inputs that can be used to interface with sensors or servos with feedback. Pimoroni PIM695

Module with 2 SSR relays with a load of up to 3 A. The board is equipped with the ULN2003 system and communicates via a digital interface. Numato Lab SSRC20001-AC

An H-bridge driver that provides bidirectional control of a high-power DC motor with a voltage range of 5-60 V and a continuous current of up to 11 A. The module supports PWM signals up to 100 kHz, features a current measurement (CS) output based on the ACS711 sensor, and features reverse polarity and short-circuit protection. It is compatible with both 3.3 V and 5 V logic, enabling easy integration with popular microcontroller platforms. Ideal for robotics, automation, and DIY projects requiring high performance and reliability. Pololu 2993

Module with 2 5 V relays with a maximum switching current of 2 A. It communicates via the USB interface and does not require an additional power supply. Numato Lab USBPOWRL001

This module for the Pimoroni Yukon system allows for simultaneous control of four servos. It features a stabilized power supply with adjustable voltage of 5V, 6V, or 7.4V and a TPS54A24 step-down converter, supporting up to 5A continuous and 10A peak current. The module has built-in temperature sensors and a power status signal for increased safety. Pimoroni PIM696

Module with 2 SSR relays with a load of up to 3 A. The board is equipped with the ULN2003 system and communicates via a digital interface. Numato Lab SSRC20001-DC

The A4988 driver is a module for controlling bipolar stepper motors with microstepping up to 1/16 step, supporting voltages up to 35 V and currents up to 2 A. It is used in 3D printers, CNC machines, and projects requiring precise motion control.

This module controls addressable LED strips in the Pimoroni Yukon system, featuring a stable 5V/5A output and a voltage level converter for proper communication with RGB LEDs. It allows for easy connection of strips via screw terminals and works with popular standards such as WS2812, SK6812, APA102, and Dotstar. The module can even control two WS2812 strips simultaneously, offering high performance and flexibility. Pimoroni PIM694

Module with 2 relays 12 V with a load of up to 7 A. The board communicates via the Bluetooth wireless interface. Numato Lab BTRL002

This power supply module for the Pimoroni Yukon offers an adjustable output voltage from 3 to 12V using a powerful step-down converter. It provides stable power with a continuous current of 5A and a peak current of up to 10A, as well as the ability to set a fixed 5V output by cutting a dedicated trace. The module allows for the use of additional digital signals and monitoring of voltage, temperature, and power supply status. Pimoroni PIM690

Module with 2-channel DC motor driver DRV8833 designed to work with the Raspberry Pi Pico. It can work with a voltage from 2.7 to 10.8 V and a current of up to 1.2 A. Pimoroni PIM617

Module with 2 relays with a maximum switching current of 7 A. It communicates via the USB interface. Numato Lab RL20001

This 13.3-inch industrial HMI module, based on the Raspberry Pi 5 with a Broadcom BCM2712 (Cortex-A76, 2.4GHz) processor, offers 4GB of RAM and a 32GB SD card, providing powerful performance for IoT applications. The device supports 2.4/5GHz Wi-Fi, Bluetooth 5.0, 4Kp60 video output to two displays via HDMI, and is rated for temperatures ranging from -20℃ to 60℃ thanks to its robust housing and fanless design. Edatec ED-HMI3010-133CA-0432

A power module for the Pimoroni Yukon platform that allows independent control of two high-current outputs within a voltage range of 5 to 17 V. Built-in diodes and chokes enable excellent handling of inductive loads such as pumps, fans, and solenoids. Each channel can also operate in PWM mode, allowing for smooth power regulation in slow-response devices. The module supports a total current of up to 15 A and includes temperature sensors and a "power good" signal. Pimoroni PIM692