Category: Electronic modules

A set of converters (transmitter and receiver) HDMI-RJ45 allowing the transmission of HDMI signal up to a distance of 60 m

Great way to upgrade a project that uses a photocell and needs RoHS compliance. Due to the high rejection ratio of infrared radiation, the spectral response of the ambient light sensor is close to that of human eyes. Adafruit 2748

Camera module with MT9D111 matrix with a resolution of 2 MPx and size 1 / 3.2 ". The transmission speed in JPEG format at full resolution of 1600 x 1200 pixels is 15 fps. It is equipped with a CS mount lens with parameters: 3MP, 1: 1.4, focal length 4.0 mm , format 1 / 2.5 \'\'. The device works with 3.3 V, it communicates via a parallel interface. ArduCam B0009

DAC converter module with current output in the range of 0 to 25 mA. It is powered by 18 V to 24 V and communicates via I2C interface (Gravity connector). It is used as a controller in industrial applications. DFRobot DFR0972

Pololu - 1524

Converter dedicated to industrial applications. Provides communication between TTL 3.3-5 V interface and RS422 serial standard. Mounted on a DIN rail. Waveshare TTL TO RS422 (B)

Camera module with an OV5642 matrix with a resolution of 5 MPx and a size of 1/4 "with output in JPEG format. The transmission speed in the full resolution of 2592 x 1944 pixels is 15 fps. It is equipped with an M12x0.5 1/4 \'\' lens. The device works with 3.3 V, it communicates via a parallel interface. ArduCam B0020

DFRobot DFR0316

A module with a two-channel DC motor driver based on the TB6612FNG system. Designed for Wemos D1 Mini

The module is equipped with eight 10A / 250VAC relays controlled independently via a serial bus (UART) or from a PC (through a microUSB connector). The NO / NC contacts of the relays have been led to the ARK screw terminals. The board recommended for use with Arduino enables the control of eight relays using only two microcontroller lines. ICSTATION ICSE014A

The module is equipped with four 10A / 250VAC relays controlled independently via a serial bus (UART) or from a PC (through a microUSB connector). The NO / NC contacts of the relays have been led to the ARK screw terminals. ICSTATION ICSE012A

Bluetooth audio receiver module with microphone in set with 3.5 mm Jack adapter. It enables wireless transmission of sounds. It is equipped with a 3.5 mm audio jack, microUSB socket and a control button

TTL/CAN-USB converter dedicated to distance sensors TF03, TF02 and TFmini with TTL/CAN interface. Comes with a miniUSB cable. Benewake TTL/CAN to USB converter

AO3406 MOSFET transistor module with N channel and JST PH2.0 connector designed to control motor, solenoid or LEDs. Adafruit 5648

Universal converter of HDMI input to AV composite output. It allows you to transmit a video signal and a stereo audio signal. HDMI2AV

Audio module with speakers designed to work with the Raspberry Pi Pico. Waveshare Pico-Audio

Module with RGB diode and P9813 controller. It is powered with the voltage of 5 V and controlled by the I2C interface (Grove). Seeed Studio 104030006

Speech recognition module with Nuvoton ISD9160 system, microphone, Flash memory and speaker output. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 101020232

A set of 37 modules for Arduino. It contains such modules as a module with an RGB diode, joystick, button, buzzer or obstacle sensor, temperature and humidity. modARD_01