IPS 4.3" LCD display with touch screen. The display is equipped with DSI interface for image display and I2C interface for touch screen. Resolution 800x480 pixels. Waveshare 4.3inch DSI LCD (with case)

Adafruit 2340

2 MP camera based on the Sony IMX327 starlight sensor, equipped with a mechanical IR-CUT filter and a fixed-focus lens with a 90° field of view, designed for Raspberry Pi via the CSI interface. Waveshare IMX327 2MP IR-CUT Camera (A)

A robust enclosure designed for Raspberry Pi 5 and 5-inch touch displays, providing stable mounting, mechanical protection, and full access to essential interfaces. Compatible with multiple 5″ screens and supports installation of Raspberry Pi HATs. Waveshare PI5-CASE-TD2-5inch

The module with the converter USB-UART CP2104 dedicated for minicomputers Raspberry Pi. Adafruit 3589

Cooling fan designed for mounting on Raspberry Pi CM4 modules. It is equipped with a 4-pin connector compatible with Compute Module 4 IO Board and Compute Module 4 PoE Board. Waveshare CM4-FAN-3007-B

Board with the NB-IoT SIM7020E module for the Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7020E-NB-IoT HAT

Dual DC motor controller designed for Raspberry Pi, which enables the engine to be supplied with voltage in the 4.5-28V range and power consumption in continuous operation of 2.6A (5A in peak) of two DC motors. Self-assembly set. Pololu 2761

This kit includes four 16MP IMX519 cameras and a baseboard for the Raspberry Pi and NVIDIA Jetson AGX Orin, Orin Nano, and Orin NX platforms. The cameras are equipped with a Sony IMX519 sensor with autofocus that works in manual, automatic, and continuous modes, offering complete control over image sharpness. With single, dual, and quad modes, the kit is ideal for robotics, surveillance, and advanced computer vision systems, ensuring synchronization and high image quality. ArduCAM B0388

Module with e-Paper display, 7.8" diagonal and 1872x1404 px resolution. Communication via USB, SPI or I80 interface. Waveshare 7.8inch e-Paper HAT

2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay fits perfectly onto the Raspberry Pi 3/2/A+/B+. The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. Adafruit 2423

Module with a 2.13" black and white e-Paper display. Equipped with an SPI interface for image display and I2C interface for a touch panel. Waveshare 2.13inch Touch e-Paper HAT (with case)

This industrial-grade edge AI/IoT NVR is based on the Raspberry Pi Compute Module 5, featuring a quad-core 2.4 GHz Arm Cortex-A76 processor and 8 GB RAM. The built-in Hailo-8 M.2 accelerator with 26 TOPS of power enables the analysis of up to four 1080p@30 FPS video streams directly on the device. The model offers four Gigabit Ethernet ports with PoE PSE (up to 12 W/port), an additional LAN, and a wide range of industrial interfaces, such as RS485, RS232, and CAN FD. SeeedStudio 100079040

This industrial-grade edge AI/IoT NVR is based on the Raspberry Pi Compute Module 5, featuring a quad-core 2.4 GHz Arm Cortex-A76 processor and 16 GB RAM. The built-in Hailo-8 M.2 accelerator with 26 TOPS of power enables the analysis of up to four 1080p@30 FPS video streams directly on the device. It also offers four Gigabit Ethernet ports with PoE PSE (up to 12 W/port), an additional LAN, and a wide range of industrial interfaces, including RS485, RS232, and CAN FD. SeeedStudio 100077451

The housing is designed for Raspberry computers: Pi 3 model B +, Pi 3 model B, Pi 2 model B and Pi 1 model B +. Prepared for wall mounting using a DIN rail (EN 60715). Italtronic 25.0610000.RMB

Module with IPS LCD display with a diagonal of 2" and a resolution of 320x240 px. Communication via the SPI interface. Pimoroni PIM580

Module with e-Paper display, 2.13" diagonal and 212x104 px resolution. Communication via SPI interface. Waveshare 2.13inch e-Paper HAT (B)

This Raspberry Pi-compatible camera offers automatic and manual focus control via Python scripts and the OpenCV library. Equipped with an 8MP Sony IMX219 sensor and a wide 77.6° field of view, it\'s ideal for drones, robotics, surveillance systems, and medicine. Its compact design and easy setup make it ideal for both hobbyists and professionals. ArduCAM B0393

3.5" IPS LCD display with touch panel. The display is equipped with HDMI interface for image display and USB for touch screen. It has a resolution of 640x480 pixels. Waveshare 3.5inch HDMI LCD (E)

Sound card for Raspberry Pi 3 Model B/2B/B+ with PCM5122 chip and IR receiver