IO expansion module dedicated to FPGA development boards from the Mimas series. Numato Lab EXPIOBRK001

Development board FPGA PYNQ-Z1 and accessor set. Includes base plate, power supply, cables and SD card with system image for PYNQ-Z1. Digilent 240-114-1

The expansion board is designed to work with Alchitry Au and Alchitry Cu. The board has four 7-segment LED displays, five buttons, 24 LEDs and 24 DIP switches. SparkFun DEV-16525

JTAG programmer designed for Numato Lab FPGA boards based on AMD chipsets, including Spartan 7, Artix 7, Kintex 7, ZYNQ SoC, and Ultrascale+. The device connects to your computer via plug-and-play USB, requires no additional power, and enables quick programming and debugging of projects in the Vivado environment. The programmer supports all basic JTAG signals at 3.3V and has a built-in UART interface for data transfer. Numato Lab NLJTPRG002

Prototype board designed to work with Alchitry Au and Alchitry Cu. There are prototype holes on the board with a 2.54 mm raster connected to the board connectors. SparkFun DEV-16524

This Spartan-7 XC7S50 FPGA development board is ideal for learning, prototyping, and educational projects. It features QSPI flash memory, a seven-segment display, eight LEDs, eight switches, an SD slot, and an HDMI video transmitter. The board supports Gigabit Ethernet, audio, and PMOD extensions, enabling extensive experimentation with digital signals, multimedia, and accelerated processing systems. FPGA configuration is possible via JTAG and USB. Numato Lab NLFPDM1001

An evaluation platform based on the Agilex™ 3 FPGA, designed for the Altera Nios® V RISC-V processor. This kit enables rapid prototyping and learning of embedded systems thanks to pre-built examples and the built-in USB Blaster III programmer. It offers interfaces such as Gigabit Ethernet, HDMI, UART, microSD, and numerous GPIO and PMOD connectors. TerasIC P0831

The DE10-Standard Development Kit presents a robust hardware design platform built around the Intel System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. P0493

The Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad-SPI Flash, and basic I/O devices. 410-328

Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Comes with enclosure. Digilent 471-042

The board features a Zynq XC7Z020, Ethernet, HDMI in/out, MIC in, Audio out, Arduino Interface, 2 Pmods, 16 pin GPIO header, user LEDs, pushbuttons and Switches. 6003-410-0

Terasic HDMI-FMC is a HDMI transmitter/receiver daughter board with FMC (FPGA Mezzanine card) interface

Terasic Spider is a six-legged robot rolling with 18 servos controlled by the Altera DE0-Nano-SoC board connecting the FPGA chip and the ARM Cortex-A9 processor. The set contains a complex robot and numerous accessories. P0425

Development Kit Artix-7 256 MB DDR3L, 16 MB Quad-SPI flash memory, programming via JTAG

Arty S7-50 is a development kit with Xilinix FPGA XC7S50-CSGA324. The board has many peripherals: slide switches, monostable buttons, RGB LEDs etc. Digilent (410-352)

The adapter is designed to connect boards with a PCIe connector to a computer. Can support PCIe Gen3 x4 interface. Terasic P0492

The JTAG-SMT3-NC module is a small, complete, surface-mounted Xilinx FPGA programmer board. It works with Xilinx takm software such as iMPACT, ChipScope ™, Vivado, and EDK. The module can be mounted on the main board as other components. Digilent 410-357

Arty S7-25 is a development kit with Xilinx FPGA XC7S25-CSGA324. The board has many peripherals: slide switches, monostable buttons, RGB LEDs etc. Digilent (410-352)

A programming platform designed on the basis of the Xilinx system-on-chip system Zynq-7000 (APSoC). The Zynq-7000 architecture integrates the ARM Cortex-A9 667 MHz processor with the Xilinx 7 FPGA chip. Digilent Cora Z7-07S (410-370)

A programming platform designed on the basis of the Xilinx system-on-chip system Zynq-7000 (APSoC). The Zynq-7000 architecture integrates the ARM Cortex-A9 667 MHz processor with the Xilinx 7 FPGA chip. Digilent Cora Z7-10 (410-370-1)