Category: Main categories

Industrial computer based on Raspberry Pi Compute Module 4, with 2 GB RAM and 32 GB eMMC, supporting system boot from SD card and a wide set of interfaces such as RS232, RS485, ADC, isolated I/O, PoE, WiFi, Bluetooth with external antennas. With built-in Flash memory, support for PCI-e Gen2 and GPIO, as well as operation in voltages from 8 to 36 V, the device is ideal for applications requiring advanced communication and reliability in industrial environments. Edatec ED-CM4IND-1232-C

Industrial computer based on Raspberry Pi Compute Module 4, optimized for IoT and data acquisition, with effective thermal management and support for an external antenna for improved wireless communication. The device offers a rich set of interfaces, such as RS485, RS232, CAN, Gigabit Ethernet and HDMI 4K, and its robust design ensures reliability in temperatures from -25 ° C to 60 ° C, with the possibility of mounting on a DIN rail. Edatec ED-CM4SEN-1408-C

Raspberry Pi CM5104032 is an advanced Compute Module 5, equipped with a quad-core Broadcom BCM2712 processor (4 x Cortex-A76) running at 2.4 GHz, 4 GB of LPDDR4 RAM, 32 GB of built-in eMMC storage, and WiFi and Bluetooth connectivity modules. With its combination of high computational power, ample storage capacity, and wireless communication, this module is perfectly suited for IoT applications, industrial automation, and embedded systems.

Benewake Solid-state ToF LiDAR CE30-A offers a wide field of view and high reliability by eliminating mechanical components. It enables obstacle detection at distances of up to 4 m, making it a suitable solution for AGVs, autonomous systems, and industrial applications requiring a stable and precise sensor. Seeed Studio 109990325

Brass Prusa Nozzle with a 0.8 mm diameter designed for Original Prusa 3D printers with the Nextruder hotend

Power switch that enables efficient power management of devices in the Qwiic ecosystem, allowing selective shutdown of devices and energy saving. The module offers I2C bus isolation, additional GPIO pins and works with SparkFun Qwiic Mux, making it easy to control multiple devices in your projects. SparkFun PRT-26784

Laboratory multimeter ideal for laboratory, industrial and scientific applications where precision and a large variety of available measurement functions are required. It offers 5 and 1/2 digit resolution and can accurately measure values with a high precision DCV of 150 ppm. It offers a wide measurement range of direct and alternating voltage, direct and alternating current, capacitance, frequency measurement, temperature, diode test, period measurement and resistance measurement using the 2- and 4-wire method. Siglent SDM3055

reServer Industrial J501 is an industrial-grade mainboard for Jetson AGX Orin, offering up to 275 TOPS of AI performance and a wide range of communication interfaces. With support for GMSL cameras, 10G Ethernet, and M.2 slots, it enables the development of advanced robotic, analytical, and industrial systems with edge AI capabilities. Seeed Studio 102991854

Bambu Lab PETG HF Red 1 kg on a spool is a 1.75 mm PETG filament designed for high-speed 3D printing. It enables printing at up to twice the speed of standard PETG while maintaining a smooth matte surface and good mechanical strength. Compatible with AMS systems and suitable for outdoor applications

STEVAL-FCU001V2 is a compact Flight Controller Unit evaluation board designed to control four quad-copter motors, based on the STM32F401 microcontroller (Arm Cortex-M4). It integrates an IMU (3-axis accelerometer and gyroscope), a MEMS barometric pressure sensor, a Bluetooth Low Energy module, and DC motor drivers, enabling rapid prototyping of flight controllers. STEVAL-FCU001V2

4-channel RS485 to Ethernet converter designed for industrial environments. Connects serial server, Modbus gateway, MQTT gateway, RS485 to JSON. It has four RS485 ports and one Ethernet port with PoE function. Waveshare 4-CH RS485 TO POE ETH (B)

Miniature development board based on ESP32-S3FH4R2 / ESP32-S3-PICO-1-N8R8 with 8 MB Flash and 8 MB PSRAM. Supports 2.4 GHz Wi-Fi and Bluetooth 5 LE. Standard version - without USB Type-C adapter board and FPC cable. Waveshare ESP32-S3-Tiny-N8R8

4-channel RS485 to Ethernet converter designed for industrial environments. Connects serial server, Modbus gateway, MQTT gateway, RS485 to JSON. It has four RS485 ports and one Ethernet port. Waveshare 4-CH RS485 TO ETH (B)

Digital oscilloscope equipped with a 7" TFT LCD display. It has four measurement channels with a bandwidth of 100 MHz, a sampling rate of 1 GSa/s and a memory buffer of 14 Mpts. Siglent SDS1104X-U

Miniature development board based on ESP32-S3FH4R2 / ESP32-S3-PICO-1-N8R8 with 8 MB Flash and 8 MB PSRAM. Supports 2.4 GHz Wi-Fi and Bluetooth 5 LE. Version with USB Type-C adapter board and FPC cable included. Waveshare ESP32-S3-Tiny-N8R8-Kit

Digital microscope with a 10.1" IPS LCD display, a MicroSD slot and an HDMI output. It is equipped with an Ultra HD image sensor and a set of three lenses for various applications. It can be connected to a monitor via the HDMI port or a computer via the USB port. Andonstar AD249S -P

Industrial computer based on Raspberry Pi Compute Module 4, optimized for IoT and data acquisition, with effective thermal management and support for an external antenna for improved wireless communication. The device offers a rich set of interfaces, such as RS485, RS232, CAN, Gigabit Ethernet and HDMI 4K, and its solid construction ensures reliability in temperatures from -25 ° C to 60 ° C, with the possibility of mounting on a DIN rail. Edatec ED-CM4SEN-1208-4C(EU)

Evaluation board with an Intel Agilex SoC featuring 1.4 million logic elements. The module includes sockets with built-in 32 GB DDR4 SO-DIMM memory, a QSFP28 connector, PCIe Gen 4x16, an integrated USB-Blaster II, and FMC/FMC+ connectors for expansion. TerasIC Apollo Agilex SOM (P0795)

Industrial computer based on Raspberry Pi Compute Module 4, optimized for IoT and data acquisition, with effective thermal management and support for an external antenna for improved wireless communication. The device offers a rich set of interfaces, such as RS485, RS232, CAN, Gigabit Ethernet and HDMI 4K, and its solid construction ensures reliability in temperatures from -25 ° C to 60 ° C, with the possibility of mounting on a DIN rail. Edatec ED-CM4SEN-1232-4C(EU)

Cooling fan dedicated to the NVIDIA Jetson Nano minicomputer. Waveshare NANO-FAN-PWM