zł13.51 tax excl.
An H-bridge capable of controlling one DC motor in both directions or two unidirectional motors at voltages from 4.5 to 44 V and continuous currents up to 1.3 A. The module offers three operating modes (PH/EN, IN/IN, half-bridge), built-in current limiting and measurement, and protection against overheating, overload, undervoltage, and reverse polarity. Its compact design, flexible logic power supply (1.8–5.5 V), and simple control make it ideal for robotics, automation, and hobby projects. Pololu 4971
The Pololu TB67H453FNG module is a compact H-bridge board that enables bidirectional control of a single DC motor or two unidirectional motors. The driver supports motor supply voltages in the range of 4.5 V to 44 V and provides a continuous output current of up to 1.3 A, with a default current limit set to around 2 A. Thanks to the built-in current sensing and regulation, it allows safe motor control without additional sensors, while integrated protections safeguard the system against overcurrent, overheating, and undervoltage. Additionally, the board includes reverse power connection protection, improving its resilience to wiring mistakes.

The TB67H453 driver requires a motor power supply in the range of 4.5 V – 44 V, provided to the VIN pin, which is protected against reverse polarity. The VM pin outputs the voltage after the protection circuitry and can power other system elements, ensuring safe operation in case of wiring errors. To exit the default sleep mode, a voltage must be applied to the SLEEP pin, which also influences the current limit threshold. This voltage can be shared with the microcontroller or dynamically controlled from one of its outputs, enabling convenient sleep mode management. The chip offers three control modes: PH/EN (phase–enable), PWM (IN/IN), and independent half-bridge mode, selectable via the PMODE pin. In the popular PH/EN mode, the PH pin defines the motor rotation direction, while a PWM signal is applied to the EN pin to control speed. This method is especially recommended as it requires only one PWM signal and ensures smooth and linear speed control in drive/brake mode.
Standard 2.54 mm mounting holes allow convenient use of pin headers, wires, or direct soldering onto a PCB. Thanks to its compact size, the module can be easily integrated into hobby and professional projects such as mobile robots, drive mechanisms, or automation systems. Flexible logic supply in the range of 1.8 V to 5.5 V ensures compatibility with a wide variety of microcontrollers, including popular platforms like Arduino, STM32, and Raspberry Pi. This simple-to-use and reliable solution enables quick motor control integration into any electronic project, guaranteeing high performance and safe operation.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Discover the latest revision of Arduino Uno - the most popular development kit in the world. The Arduino Uno in its newest iteration impresses with a three-fold increase in clock speed, eight-fold larger flash capacity, and a sixteen-fold increase in SRAM capacity. But that\'s just the beginning, as Arduino Uno also offers a wide range of additional peripherals, powered by a 32-bit Renessas RA4M1 microcontroller with an ARM M4 core. With the new Arduino Uno, you don\'t have to worry about compatibility, as the board is compatible with all shields from previous revisions. Thanks to the elaborate security systems and compatibility with existing guides and projects, Arduino Uno becomes the ideal solution for both beginners and advanced electronics enthusiasts. Arduino ABX00080
A mini-computer in version 5 with 4GB of RAM, equipped with two microHDMI ports, 2 USB 3.0 ports, and 2 USB 2.0 ports, as well as a USB-C power connector. The processor is a quad-core Broadcom BCM2712 clocked at 2.4GHz. The board also features dual-band WiFi, Bluetooth 5.0 with BLE support, PCI Express 2.0 interface, and a real-time clock. Raspberry Pi SC1111
No product available!
A mini-computer in version 5 with 8GB of RAM, equipped with two microHDMI ports, 2 USB 3.0 ports, and 2 USB 2.0 ports, as well as a USB-C power connector. The processor is a quad-core Broadcom BCM2712 clocked at 2.4GHz. The board also features dual-band WiFi, Bluetooth 5.0 with BLE support, PCI Express 2.0 interface, and a real-time clock. Raspberry Pi SC1111
No product available!
DC motor driver that allows you to control the movement of three drives using the I2C interface. Pololu 5035
A single-channel DC motor controller with a UART TTL interface. It is powered from 1.8 V to 22 V and can deliver up to 1.8 A of current. Board with soldered connectors. Pololu 5076
A single-channel DC motor controller with an I2C interface. It is powered from 1.8 V to 22 V and can deliver up to 1.8 A of current. Board with connectors for assembly. Pololu 5075
A two-channel DC motor controller with an I2C interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. A board with connectors for mounting. Pololu 5065
No product available!
This board allows for simultaneous control of two motors with full direction and stopping control, ideal for robotic buggies and educational vehicles. It features built-in short circuit, overload, and overheat protection, as well as a stabilized 3V output to power the micro:bit. The Edge Connector and additional pins allow for easy connection of sensors, switches, and accessories, expanding the project\'s functionality. Programming is supported by dedicated MakeCode blocks and support for the Kitronik 5698 Python.
A single-channel DC motor controller with a UART TTL interface. It is powered from 4.5 V to 48 V and can deliver up to 2.2 A of current. Board with connectors for assembly. Pololu 5063
No product available!
A single-channel DC motor controller with an I2C interface. It is powered from 1.8 V to 22 V and can deliver up to 1.8 A of current. Board with soldered connectors. Pololu 5074
Module with a 2-channel DC motor driver TB6612FNG designed to work with micro: bit. It can also control 3 servos. SB Components 14897
HAT module with TB6612FNG motor driver and PCA9685 PWM driver designed for Raspberry Pi minicomputers. The board is equipped with a 40-pin connector. Adafruit 4280
The X-NUCLEO-IHM12A1 is a low voltage dual brush DC motor driver expansion board based on the STSPIN240 for STM32 Nucleo. It provides an affordable and easy-to-use solution for the implementation of portable motor driving applications such as thermal printers, robotics and toys
Two-channel motor controller with L298N system with 4.8 ... 46V motor power supply and 2A current capacity per channel. It has a protection in the form of diodes. DFRobot DRI0002
DC motor driver that allows you to control the movement of three drives using the I2C interface. Plate with connectors for assembly. Pololu 5031
No product available!
Module with DC motor driver DRV8876. It can work with motors supplied with the voltage from 4.5 to 37 V and current consumption up to 1.1 A. Pololu 4037
Dual DC motor controller with voltage from 2.5 to 9.5V with 1A continuous current per channel. Has an embedded voltage regulator. Cytron Maker Drive
DC motor driver with a working voltage from 5 to 30 V and a maximum continuous current of 13 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MD10C
Pololu High-Power Motor Driver 24v20
An H-bridge capable of controlling one DC motor in both directions or two unidirectional motors at voltages from 4.5 to 44 V and continuous currents up to 1.3 A. The module offers three operating modes (PH/EN, IN/IN, half-bridge), built-in current limiting and measurement, and protection against overheating, overload, undervoltage, and reverse polarity. Its compact design, flexible logic power supply (1.8–5.5 V), and simple control make it ideal for robotics, automation, and hobby projects. Pololu 4971