.png)
TCA9548A 8-Channel I2C Multiplexer 1.65–5.5V - Soldered
ID: 1208275
zł24.66
Tax included
zł20.05 tax excl.
8-channel I2C bus multiplexer based on the TCA9548A, allowing devices with identical I2C addresses to operate with one microcontroller. The multiplexer address can be configured from 0x70 to 0x77 using A0–A2 jumpers, while 10 Qwiic connectors simplify solderless connections. Operating voltage range is 1.65–5.5V. Soldered 333077
Description
The device I2C multiplexer TCA9548A breakout by Soldered uses the TCA9548A IC and provides 8 independent I2C channels. Multiplexing allows multiple devices with identical I2C addresses to be connected to one microcontroller, avoiding address conflicts by selecting the channel used for communication. Applications include measurement systems containing multiple identical sensors and peripheral modules.
The main bus uses the SDA and SCL lines, while individual channels provide SDA0–SDA7 and SCL0–SCL7 pairs. The required channel is selected through I2C commands. The board features 10 Qwiic connectors for solderless connection to compatible devices.
The default multiplexer address is 0x70. Three address jumpers, A0, A1, and A2, allow selection of one of eight addresses from 0x70 to 0x77. Up to 8 multiplexers can therefore operate on one bus, providing access to as many as 64 devices with identical I2C addresses.
The operating voltage range is 1.65–5.5V, allowing operation with I2C systems using different voltage levels. The board measures 54 × 38mm and features four mounting holes designed for M3 screws. The manufacturer provides an Arduino library, documentation, and open-source hardware design files.
Features
- I2C multiplexer
- IC: TCA9548A
- Number of channels: 8
- Channel lines: SDA0–SDA7, SCL0–SCL7
- Supports multiple devices with identical I2C addresses
- Up to 8 multiplexers on one I2C bus
- Up to 64 devices with identical I2C addresses when using 8 multiplexers
- Communication and connectors
- Interface: I2C
- Default I2C address: 0x70
- Available addresses: 0x70–0x77
- Address selection using A0, A1, and A2 jumpers
- Connectors: 10 × Qwiic
- Power supply
- Operating voltage range: 1.65–5.5V
- Mechanical parameters
- Board dimensions: 54 × 38mm
- Number of mounting holes: 4
- Mounting hole diameter: 3.2mm
- Mounting holes designed for M3 screws
1208275
Other products in the same category (16)
I2C multiplexer module with TCA9548A system. Allows you to connect up to 8 devices. The system works like a gateway - it transmits I2C interface data to one of the 8 main busses. This allows you to connect up to 8 devices with the same address. Adafruit 2717
zł37.48
24h
Available quantity: 3
Available
16-channel GPIO expander with an I2C interface microcontroller can interface with 16 fully configurable digital input/output pins. It can produce PWM signals, so you can dim LEDs. It can be set to blink or even breathe pins at varying rates. With a built-in keypad engine, it can interface with up to 64 buttons set up in an 8x8 matrix. BOB-13601
zł41.05
24h
Available quantity: 3
Available
Available
PCA9555APW,118 is a versatile 16-bit I/O expander with I2C interface and interrupt capability, ideal for applications requiring efficient GPIO extension
zł7.90
24h
Available quantity: 488
Available
Micro:Mate is an expansion board for the micro: bit development module. It provides six 3-pin connectors with I/O outputs, a 3.5mm audio jack connector and is powered from a 5V microUSB connector. DFRobot DFR0518
zł30.90
4 weeks
No product available!
Module with 16-channel I/O ports expander controlled by the I2C interface. It was based on the MCP23017 chip. Waveshare MCP23017 IO Expansion Board
zł29.36
24h
Available quantity: 5
Available
Module with 16-channel IO expander MCP23017 controlled by the I2C interface. Designed for minicomputers Raspberry Pi. Adafruit 4132
zł55.97
24h
Available quantity: 2
Available
8-channel I2C expander module based on the TCA9548A system. The module has Qwiic connectors and allows communication with many I2C devices that have the same address. Sparkfun BOB-16784
zł41.05
24h
Available quantity: 3
Available
16-channel I/O port expander module controlled by the I2C interface. The module is based on the MCP23017-E/SS system.
zł29.90
24h
Available quantity: 2
Available
I2C-UART converter module with two UART output interfaces. Configuration of I2C addresses allows you to connect up to 4 such modules to one controller, which means extending the board\'s capabilities by 8 UART interfaces. DFRobot DFR0627
zł35.79
24h
Available quantity: 6
Available
Module with an IO pin expander based on the TCA9534 system. It allows you to add 8 GPIO pins to an I2C-controlled project. SparkFun DEV-17047
zł31.13
3 weeks
No product available!
IO port expander for M5Stack kits. Equipped with 8 IO pins and power pins, it communicates via the I2C interface. M5Stack U011-B
zł39.36
24h
Available quantity: 1
Available
Module with IO expander equipped with 14 inputs/outputs, including 8 connected to the ADC converter and 6 to PWM outputs. It communicates via the I2C interface and is compatible with the Raspberry Pi. Pimoroni PIM517
zł44.07
24h
Available quantity: 1
Available
The KAmodPCAL6408 is an 8-bit I/O expander with the PCAL6408A chip by NXP, controlled by the I2C interface.
zł16.90
24h
Available quantity: 400
Available
Module with a 16-channel GPIO expander with the ability to control LEDs. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4886
zł28.07
24h
Available quantity: 5
Available
I2C bus amplifier module based on the LTC4311 system. It enables communication via a popular interface over much longer distances while maintaining high transmission speeds. Adafruit 4756
zł39.45
24h
Available quantity: 9
Available
8-channel I2C bus multiplexer based on the TCA9548A, allowing devices with identical I2C addresses to operate with one microcontroller. The multiplexer address can be configured from 0x70 to 0x77 using A0–A2 jumpers, while 10 Qwiic connectors simplify solderless connections. Operating voltage range is 1.65–5.5V. Soldered 333077