Gravity: Steam Sensor - analog steam sensor
ID: 581659
5906623406647
zł6.21
Tax included
zł5.05 tax excl.
Module with a steam sensor. It can be supplied with the voltage of 3.3 V or 5 V. It has an analog output. DFRobot SEN0121
Description
Module with a steam sensor. It is equipped with a measuring probe and a Gravity connector. It enables the detection of water vapor. The module can be supplied with the voltage of 3.3 V or 5 V. It has an analog output. It can be used as a rain sensor, a steam switch or a touch sensor. The manual and sample programs are available on the Wiki page.
Features
- Output voltage signal: 0 to 4.5V (for VCC = 5V) or 0 to 3.0V (for VCC = 3.3V)
- Pin description:
- Analog output (blue wire)
- GND (black wire)
- VCC (red wire)
- Power supply: 3.3 V or 5 V
- Dimensions: 30 x 20 x 6 mm
Kit contains
- Steam sensor
- Gravity cable
581659
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
Powerful expansion shield for Arduino Mega. It is large enough to carry up to 3 Xbee slots, 1 microSD slot and shield headers for most Arduino shields on the market. DFR0165
zł50.66
24h
Available quantity: 2
Available
Available
Other products in the same category (16)
Module with temperature and humidity sensor DHT11. It allows you to measure humidity in the range of 20 ... 90% and temperature (0 ... 50 ° C). DFRobot DFR0067
zł21.97
24h
Available quantity: 4
Available
Air humidity and temperature sensor with 1-Wire interface.
zł10.86
24h
Available quantity: 13
Available
Module with environmental sensors for Raspberry Pi Pico. It allows you to measure temperature, humidity, air quality pressure and color detection. SB Components 22366
zł208.80
24h
Available quantity: 3
Available
Module with temperature and humidity sensor DHT11. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020011
zł22.00
24h
Available quantity: 3
Available
SHT31 Digital Temperature & Humidity Sensor Breakout - module with SHT31 temperature and humidity...
Module with a digital temperature and humidity sensor based on the SHT31. Communication via the I2C interface. DFRobot SEN0331
zł65.69
24h
Available quantity: 1
Available
Module with a digital temperature and humidity sensor based on the SHTC3 system. Communication takes place via the I2C interface. DFRobot SEN0414
zł24.39
24h
Available quantity: 5
Available
Module with sensors of environmental parameters. It allows you to measure temperature, humidity and pressure as well as CO2 and VOC concentration. DFRobot SEN0335
zł136.19
24h
Available quantity: 2
Available
Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193
zł92.99
24h
Available quantity: 3
Available
The AHT25 is a versatile and precise humidity and temperature measurement module, ideal for consumer electronics and industrial applications.
zł10.86
24h
Available quantity: 57
Available
DFRobot SEN0629 environmental module with a BME688 sensor enables precise measurement of temperature, humidity, pressure, and VOC, and supports AI-assisted gas analysis. Compatibility with I2C/SPI and broad functionality make it suitable for use in smart building systems, environmental monitoring, and industry.
zł66.22
24h
Available quantity: 1
Available
Module with a temperature and humidity sensor based on the HTU31 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4832
zł39.52
24h
Available quantity: 3
Available
The AM2315C is an advanced packaged temperature and humidity sensor offering easy integration with microcontrollers thanks to its 2.5V-5.5V power supply and standard I2C interface, providing greater resistance to external conditions than typical SHT sensors, with measurement accuracy of ±2% RH and ±0.3°C
zł79.00
24h
Available quantity: 19
Available
Ideal for environmental sensing and data logging and perfect for build a weather stations or humidor control system; built-in 4.7KΩ pullup resistors for I2C communications. SEN-13763
zł57.29
24h
Available quantity: 3
Available
Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019
zł62.32
24h
Available quantity: 5
Available
Module with temperature and humidity sensor TH02. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020074
zł64.23
24h
Available quantity: 3
Available
Digital temperature and humidity sensor with calibrated digital output signal. Equipped with a 2.5 mm 4-pin male stereo audio connector that works perfectly with the Sonoff TH10/TH16 socket. Sonoff Si7021
zł36.90
24h
Available quantity: 10
Available
Module with a steam sensor. It can be supplied with the voltage of 3.3 V or 5 V. It has an analog output. DFRobot SEN0121