Micsig MHO3-2504 - 4-channel 250MHz oscilloscope
ID: 1190094
zł10,455.00
Tax included
zł8,500.00 tax excl.
4-channel digital oscilloscope offering a 250 MHz frequency band and a sampling rate of up to 3 GSa/s. It has a built-in memory with a depth of 360 Mpts. It is equipped with a 14-inch touch screen with a resolution of 1920 x 1200 pixels. Micsig MHO3-2504
Description
The MHO3-2504 is a fifth-generation 4-channel digital oscilloscope, offering a frequency bandwidth of 250 MHz and a sampling rate of up to 3 GSa/s. It features a built-in memory depth of 360 Mpts. Equipped with a 14-inch touchscreen with a resolution of 1920 x 1200 pixels, it provides clear signal waveform display. The MHO includes a high-resolution 12-bit ADC with a quantization level up to 4096—16 times higher than that of traditional 8-bit ADCs—helping users observe waveform details in a more comprehensive and precise way. It has a very slim design (only 3.58 cm thick) and supports VESA mounting, which significantly saves workspace.
Thanks to the original Mic-OPI™ probe interface, the oscilloscope automatically detects the attenuation factor of a passive probe, enabling instant and accurate calibration. This solution eliminates the need for manual configuration and improves measurement accuracy. The device is equipped with a standard BNC adapter, ensuring compatibility with a wide range of accessories. It also features a rich set of connectors, including USB 3.0 Host, USB Type-C, LAN, HDMI, Trigger Out, and more, making it easy to integrate into various testing environments.
The oscilloscope's noise level is less than 80 μVrms at full 500 MHz bandwidth, allowing engineers to accurately capture weak but significant signals during daily circuit debugging. The 360 Mpts memory depth ensures excellent signal fidelity, and segmented memory divides the space into multiple small segments, collecting numerous trigger events in one memory area. This allows for effective long-term recording and later playback of target signals for further analysis.
The MHO 3 series offers an exceptionally user-friendly interface. It features the dedicated SigTestUI™ operating system, specially designed for measurement instruments. Built on 10 years of UI design experience, the interface has been simplified to the maximum. As a result, even new users can learn to operate it within just 5 minutes.
Hardware filtering allows you to selectively pass or block signal components within a defined frequency range. This is especially useful for analyzing specific frequency bands or observing changes in selected frequency components. In addition to standard passive probes, the oscilloscope is compatible with all Micsig probes: isolated optical probes, high-voltage differential probes, and AC/DC current probes, helping you maximize the performance of both the probes and the oscilloscope.
Features
- Bandwidth: 250 MHz
- Rise time: 1.4 ns
- Analog channels: 4
- Real-time sampling rate: 3 GSa/s
- Memory depth: 360 Mpts
- Max waveform capture rate: 230,000 wfms/s
- Noise: <80 μVrms
- Vertical resolution: 12-bit
- Trigger types: edge, pulse width, logic, N edge, pulse, slope, timeout, serial bus
- Bus decoding: RS-232/422/485/UART, CAN, CAN FD, LIN, SPI, I²C, ARINC-429, MIL-STD-1553B
- Interfaces: USB 3.0 Host, USB Type-C, HDMI, trigger output
- Display: 14-inch touchscreen, 1920 x 1200 pixels
- Mobile app, remote PC control, SCPI command support
- User interface: SigTestUI™
- Internal memory: 32 GB
- VESA mount support
- Power supply: 100 to 240V AC, 50/60Hz
- Dimensions: 400 x 280 x 35.8 mm
- Weight: 4.3 kg
Kit Contents
- Oscilloscope
- 4 x Passive probe
- 4 x MSP-BNC adapter
- Power adapter
- Power cord
1190094
Data sheet
- Type of oscilloscope
- Digital
- Bandwidth
- 250 MHz
- Sampling rate
- 3 GSa/s
- Memory depth
- 360 Mpts
- Number of channels
- 4
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Probe for measuring direct and alternating current up to 100 A. It works in the 800 kHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100A
zł1,444.08
24h
Available quantity: 1
Available
Probe for measuring direct and alternating current up to 100 A. It works in the 2,5 MHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100B
zł2,119.70
Delivery date unknown
No product available!
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 300 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig MDP1503
zł3,906.17
24h
Available quantity: 2
Available
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 500 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig MDP1505
Regular pricezł6,624.87zł5,399.00
24h
Available quantity: 2
Available
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is perfect for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP600XS
zł4,059.00
Delivery date unknown
No product available!
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP1200XS
zł4,059.00
Delivery date unknown
No product available!
Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP12000XS
zł5,043.00
Delivery date unknown
No product available!
Other products in the same category (16)
Digital oscilloscope equipped with a 7" TFT LCD display. It has four measurement channels with a 50 MHz bandwidth, a sampling rate of 1 GSa/s and a 24 Mpts memory buffer. Rigol DS1054Z
zł1,812.64
24h
Available quantity: 3
Available
This digital oscilloscope offers 12-bit vertical resolution and a sampling rate of up to 2 GSa/s, ensuring exceptional precision and measurement performance. Equipped with a 7-inch, capacitive touchscreen with a resolution of 1024x600 and an advanced trigger system with serial bus analysis, it enables intuitive operation and comprehensive signal diagnostics. With remote control via LAN and USB and support for VXI-11, SCPI, and USBTMC protocols, the SDS812X is ideal for automated test systems.
zł2,148.99
24h
Available quantity: 1
Available
Digital oscilloscope equipped with a 7" TFT LCD display. It has two measurement channels with a 50 MHz bandwidth, a sampling rate of 0.5 GSa/s and a 32 k-point memory buffer. Siglent SDS1202X-E
zł1,460.76
24h
Available quantity: 1
Available
Digital oscilloscope equipped with a 7" TFT LCD display. It has two measurement channels with a 200 MHz bandwidth, a sampling rate of 1 GSa/s and a 14 Mpkt memory buffer. Siglent SDS1202X-E
zł1,689.93
24h
Available quantity: 3
Available
The RIGOL DS1000Z-E series digital oscilloscope, with a bandwidth of 100 MHz and a sampling rate of 1 GSa/s, is an excellent tool for engineers, technicians, and students. With 24 Mpts acquisition memory and support for serial bus triggering and decoding, this oscilloscope provides the reliability and precision needed in many applications. Its compact design and ease of use make it an ideal choice for various tasks. Rigol DS1102Z-E
zł1,801.69
24h
Available quantity: 1
Available
4-channel digital oscilloscope, which offers a frequency band of 250 MHz and a sampling rate of up to 3 GSa/s. The device has a built-in memory with a capacity of 360 Mpts, guaranteeing long-term data recording without losing details. It is equipped with a large, 14-inch touch screen with a high resolution of 1920 x 1200 pixels, providing a clear and convenient view of waveforms. Micsig MDO2504
zł9,269.54
4 weeks
No product available!
Micsig MHO68-350 is a high-resolution 12-bit oscilloscope with 350 MHz bandwidth and 8 channels, designed for advanced signal measurements in research and development, educational, and industrial applications. Its integrated 16" display, segmented 1800 Mpts memory, and wide range of protocol decoders ensure measurement versatility and precision.
zł55,681.04
4 weeks
No product available!
A compact and cost-effective digital oscilloscope with four channels, 70 MHz bandwidth, and 12-bit resolution, ideal for professional and educational applications. It offers a sampling rate of up to 1.25 GSa/s, 25 Mpts of memory, and an acquisition rate of up to 1,000,000 wfms/s in UltraAcquire mode, enabling precise capture of even rare signal anomalies. Equipped with a 7-inch touchscreen, intuitive controls, USB, LAN, and HDMI interfaces, and USB-C power, it offers ease of use and portability.
zł1,874.67
4 weeks
No product available!
Micsig MHO14-100 is a four-channel, tablet-based 12-bit oscilloscope with a 100 MHz bandwidth, designed for mobile and advanced signal measurements. It supports remote control, serial bus decoding, and multimeter functions, making it a versatile tool for electronics technicians and service engineers.
zł3,199.00
4 weeks
No product available!
4-channel digital oscilloscope offering 500 MHz frequency bandwidth and up to 3 GSa/s sampling rate. It has a built-in memory with a depth of 360 Mpts. It is equipped with a 14-inch touch screen with a resolution of 1920 x 1200 pixels. Micsig MHO3-5004
zł16,999.01
4 weeks
No product available!
Digital oscilloscope equipped with a 7" TFT LCD display. It has four measurement channels with a bandwidth of 100 MHz, a sampling rate of 1 GSa/s and a 14 Mpkt memory buffer. Siglent SDS1104X-E
zł2,101.61
24h
Available quantity: 3
Available
4-channel digital oscilloscope offering a frequency band of 500 MHz and sampling speed up to 3 GSa/s. It has a built-in memory with a depth of 360 Mpts. It is equipped with a 14-inch touch screen with a resolution of 1920 x 1200 pixels. Micsig MDO5004
zł8,979.00
4 weeks
No product available!
Micsig MHO14-100 kit-Case is a four-channel, tablet-based 12-bit oscilloscope with a 100 MHz bandwidth, designed for mobile and advanced signal measurements. It supports remote control, serial bus decoding, and multimeter functions, making it a versatile tool for electronics technicians and service engineers. Portable suitcase included in the set.
zł3,349.99
4 weeks
No product available!
Digital oscilloscope with built-in signal generator. It has two measurement channels with 100 MHz bandwidth and a single-channel signal generator with waveform frequencies up to 25 MHz. Hantek DSO2D10
zł949.44
4 weeks
No product available!
4-channel digital oscilloscope offering a frequency band of 500 MHz and a sampling speed of up to 3 GSa/s. It has a built-in memory with a depth of 360 Mpts. It is equipped with a 14-inch touch screen with a resolution of 1920 x 1200 pixels. Micsig MHO5004
zł17,152.50
4 weeks
No product available!
Micsig MHO68-1000 is a high-resolution 12-bit oscilloscope with 1 GHz bandwidth and 8 channels, designed for advanced signal measurements in research and development, educational, and industrial applications. Its integrated 16" display, segmented 1800 Mpts memory, and wide range of protocol decoders ensure measurement versatility and precision.
zł87,605.80
4 weeks
No product available!
4-channel digital oscilloscope offering a 250 MHz frequency band and a sampling rate of up to 3 GSa/s. It has a built-in memory with a depth of 360 Mpts. It is equipped with a 14-inch touch screen with a resolution of 1920 x 1200 pixels. Micsig MHO3-2504