SEQURE ELRS 2.4GHz Single RX - 2.4GHz FPV receiver with one antenna
ID: 1205248
5902186337251
zł59.69
Tax included
zł48.53 tax excl.
A 2.4 GHz radio receiver for FPV drones and RC models, supporting the ExpressLRS (CRSF) protocol. With a 1000Hz and 500Hz refresh rate, it delivers ultra-low latency and high-precision control, ideal for racing applications. Based on the ESP8285 and SX1281 with a TCXO and PA+LNA amplifier, the system guarantees stable communication and telemetry with a power output of up to 100 mW. Its compact size, single Ipex1 antenna, and flexible mounting options make it ideal for lightweight and compact designs. SEQURE ELRS 2.4GHz Single RX
Description
SEQURE ELRS 2.4GHz Single RX is a compact and high-performance radio receiver designed for use in FPV drones, fixed-wing aircraft models, and RC systems, where low latency and stable connection are critical. The device operates in the 2.4 GHz ISM band, ensuring strong signal quality and high resistance to interference. With support for the ExpressLRS (CRSF) protocol, the receiver provides ultra-fast data transmission and highly responsive control. Support for refresh rates of F1000Hz and F500Hz makes it ideal for FPV racing and dynamic applications requiring minimal latency.
At the core of the module is an ESP8285 microcontroller paired with an SX1281 RF chip, ensuring stable communication and high performance. The built-in PA+LNA amplifier and telemetry power of up to 100 mW (20 dBm) provide reliable bidirectional data transmission even over longer distances. The use of a TCXO oscillator enables stable operation under varying temperature conditions, which is especially important during flights in demanding environments.
The receiver is designed with a single antenna configuration using an Ipex1 interface, allowing easy integration into compact builds. It offers two connection options: via a SH1.0-4P connector or 2.54 mm pads, providing flexibility during installation. Its small size and extremely low weight make it perfect for lightweight racing drones and space-constrained models.
SEQURE ELRS 2.4GHz Single RX is an excellent choice for users looking for a lightweight, reliable, and fast receiver for FPV and RC systems. Thanks to its high refresh rate, stable telemetry, and interference resistance, it ensures precise control and flight safety. The pre-installed firmware allows for quick setup without the need for complex configuration.
Features
- Microcontroller: ESP8285
- RF chip: SX1281
- Oscillator type: TCXO (temperature compensated)
- PA power (telemetry): 100 mW (20 dBm)
- LNA amplifier
- Indicator: LED
- Operating band: 2.4 GHz ISM
- Protocol: CRSF (ExpressLRS)
- RF mode: single antenna
- Antenna interface: Ipex1
- Receiver interface: SH1.0-4P and 2.54-4P pads
- Refresh rate: F1000Hz / F500Hz
- Factory firmware: SEQURE 2.4GHz Single RX_3.4.0
- Supply voltage: 5 V
- Dimensions: 18 × 10.8 × 5 mm
- Weight: 0.7 g
Kit contains
- SEQURE ELRS 2.4GHz Single RX
- 2.4 GHz antenna 80 mm
- 30AWG 100 mm cable SH1.0-4P
- 2 × heat shrink tubes 12 × 30 mm
1205248
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Brushless ESC speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V). SEQURE SQESC 2670 AM32
zł159.14
24h
Available quantity: 3
Available
<p>ESC brushless motor speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V) SEQURE SQESC 2670 ESCape32 + BEC.</p>
zł212.18
24h
Available quantity: 3
Available
This ESC is designed for advanced applications like drones, RC models, and high-powered vehicles, supporting 5- to 12-stage LiPo power supplies. Equipped with a 32-bit STM32G071 microcontroller and PWM support up to 128 kHz, it provides very smooth and precise motor control. It offers continuous current up to 200 A and burst current up to 250 A, and thanks to efficient MOSFETs and a CNC heatsink, it remains stable even under heavy loads.
zł457.52
24h
Available quantity: 3
Available
Other products in the same category (16)
A wireless transceiver operating in the 434 MHz band based on the RFM69HCW system. Maximum power: 100mW; bit rate up to 300kbps. Range in the open space reaches up to 500m. The module communicates using the SPI bus. Compatible with Arduino
zł13.91
24h
Available quantity: 9
Available
Available
The FS1000A transmitter and the MX-RM-5V receiver enable communication in the ISM band; they are easy to use, do not require advanced bus control and have very small dimensions. Especially recommended for work with Arduino and STM32
zł5.63
4 weeks
No product available!
DFRobot 315MHz RF receiver module using SC2272-L4 low power decoder chip. DFRobot TEL0112
zł33.97
24h
Available quantity: 1
Available
WIFI-LPT100 Eval Kit module enables UART data transmission via WiFi, ultra low power consumption, encrypted communication
zł110.76
4 weeks
No product available!
A GFSK transceiver operating in the ISM 2400 ... 2483.5 MHz frequency range. Powered by a voltage of 1.9 ... 3.6 V, the pins are goldpin connectors. It has a built-in PCB antenna. HOPE MICROELECTRONICS RFM75-S
zł7.20
24h
Available quantity: 5
Available
HAT module with RFM95W 868 MHz system for LoRa/LoRaWAN communication and OLED display, designed for Raspberry Pi minicomputers. Adafruit 4074
zł197.59
24h
Available quantity: 2
Available
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
zł110.65
4 weeks
No product available!
Radio module with RFM69HCW 433 MHz chip, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4073
zł144.14
24h
Available quantity: 2
Available
Expansion board for STM32 Nucleo based on S2-LP RF transmitter operating in 868MHz band. The expansion board is compatible with ST morpho and Arduino UNO R3 connectors. STMicroelectronics X-NUCLEO-S2868A2
zł161.81
24h
Available quantity: 1
Available
Module with 2.4 GHz transceiver system (transmitter and receiver) LT892. It is powered with the voltage of 3.3 V and has a built-in antenna
zł5.67
4 weeks
No product available!
Multi-channel wireless data transmission module operating at 433 MHz. It is supplied with the voltage ranging from 3.2 V to 5.5 V and communicates via the UART interface
zł23.90
4 weeks
No product available!
A set with a radio transmitter and receiver operating at 433 MHz. The modules are equipped with Grove connectors and communicate via a digital interface. Seeed Studio 104020002
zł62.15
24h
Available quantity: 2
Available
A set with a radio transmitter and receiver operating at 315 MHz. The modules are equipped with Grove connectors and communicate via a digital interface. Seeed Studio 113020001
zł50.26
24h
Available quantity: 2
Available
6-channel transmitter (RC apparatus) 2.4 GHz Flysky FS-i6 with LCD display in set with receiver FS-IA6 with telemetry support. 6V power supply (4 x AA battery). Left-hand throttle (right-handed version). Flysky FS-i6
zł252.88
4 weeks
No product available!
Wireless communication module based on the NRF24L01 chip. It is designed for SMD mounting and will be perfect for the construction of small devices
zł6.43
4 weeks
No product available!
A 2.4 GHz radio receiver for FPV drones and RC models, supporting the ExpressLRS (CRSF) protocol. With a 1000Hz and 500Hz refresh rate, it delivers ultra-low latency and high-precision control, ideal for racing applications. Based on the ESP8285 and SX1281 with a TCXO and PA+LNA amplifier, the system guarantees stable communication and telemetry with a power output of up to 100 mW. Its compact size, single Ipex1 antenna, and flexible mounting options make it ideal for lightweight and compact designs. SEQURE ELRS 2.4GHz Single RX