Water atomizer - Grove module
ID: 564199
5906623414123
zł64.50
Tax included
zł52.44 tax excl.
The kit includes a control module (with ETA1617 and NE555) and an ultrasonic transducer. The water atomiser module allows for the construction of, for example, a small humidifier. The module has a connector in accordance with the Grove standard. Seeed studio 101020090
Description
The kit includes a control module (with ETA1617 and NE555) and an ultrasonic transducer. The water atomiser module allows for the construction of, for example, a small humidifier. It can also be used for other projects where atomization (spraying) is needed. The module has a connector in accordance with the Grove standard.
The module can be used with the Base Shield V2 - shield extension with Grove connectors for Arduino
Attention!
Do not touch the contacts to which the ultrasound transducer is connected (marked with a red frame in the picture above) because the voltage (momentary) up to 65 V may occur on them, in addition the area heats up during operation.
Do not touch the contacts to which the ultrasound transducer is connected (marked with a red frame in the picture above) because the voltage (momentary) up to 65 V may occur on them, in addition the area heats up during operation.
properties
- Based on the following systems: ETA1617, NE555
- Maximum power: 2 W
- Peak output voltage: 65 ± 5 V
- Operating frequency: 105 ± 5 kHz
- Grove connector
- Power supply: 5 V
Included
- Water atomizer - Grove module
- Ultrasonic transducer
- Grove system cable
564199
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A small module with a temperature sensor (thermistor). As the temperature changes, the resistance of the thermistor changes, which allows the temperature to be measured in the range from -40 to 125 ° C with an accuracy of 1.5 ° C. The module has a connector in accordance with the Grove standard. Seeed studio 101020015
zł15.36
24h
Available quantity: 2
Available
Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049
zł38.14
24h
Available quantity: 2
Available
The module allows the detection of volatile organic compounds (VOC) in the air, based on Winsen\'s WSP2110 system. Allows for detection in the air; formaldehyde (HCHO), methane, benzene, toluene, alcohol, etc. The sensor output is an analog signal. Seeed studio 101020001
zł79.32
24h
Available quantity: 4
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 19
Available
Other products in the same category (16)
STMPRIMER-PROTO is a set of 5 universal prototyping boards compatible with the STMPRIMER-BASE, enabling rapid testing and creation of hardware extensions in the EvoPrimer environment.
zł202.00
24h
Available quantity: 2
Available
This encoders are designed for DFRobot 3PA and AWD Rovers. It can give you the rotation degree of the wheels. Encoder uses non-contact method to convert the angular displacement signals. Best fit with Micro DC Geared Motor. SEN0038
zł54.93
24h
Available quantity: 2
Available
Development kit with SAMD21G18 microcontroller with ARM Cortex M0 core and LoRa RFM95 868/915 MHz radio communication module. Adafruit 3178
zł176.16
24h
Available quantity: 1
Available
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł10.47
24h
Available quantity: 15
Available
USB module supporting Bluetooth 5.3, Bluetooth mesh, Thread, Zigbee, 802.15.4, ANT and 2.4 GHz protocols. It is an ideal target device for use with the nRF Connect for Desktop application. Nordic Semiconductor nRF52840 Dongle
zł69.90
24h
Available quantity: 6
Available
The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. The set contains all the elements needed to build a weather station. Sparkfun KIT-16274
zł898.98
3 weeks
No product available!
A powerful development board based on the ESP32-S3-WROOM-1 microcontroller, offering a dual-core Xtensa LX7 processor with a frequency of up to 240 MHz, which enables support for advanced AIoT and IoT applications. The board is equipped with 16MB Flash and 8MB PSRAM, which allows for storing larger applications and efficient real-time data processing. With built-in 2.4GHz Wi-Fi, Bluetooth 5.0 LE and easy connection via USB-C, it is an ideal solution for the development of smart devices, sensors and automation systems. Waveshare ESP32-S3-DEV-KIT-N16R8-M
zł48.68
24h
Available quantity: 35
Available
NUCLEO series starter kit equipped with a STM32WL55JC microcontroller (256 KB Flash, Cortex-M4/M0+), with a built-in STLINK-V3E programmer-debugger, equipped with Arduino-compatible connectors
zł252.92
24h
Available quantity: 1
Available
ESP32-C3-LCD-0.71-B is a compact, energy-efficient module with an IPS display and wireless connectivity, featuring a protective enclosure and lens. Ideal for portable projects such as watches, graphic interface sensors, simulation systems, or touch-controlled devices. With support for LVGL and flexible expansion options, it is suitable for a wide range of embedded applications.
zł57.26
24h
Available quantity: 3
Available
A module with a magnet sensor that allows you to detect the presence of an object emitting a magnetic field in the environment. The module is supplied with the voltage ranging from 3.3 V to 5 V and has a digital output. DFrobot DFR0033
zł13.74
24h
Available quantity: 1
Available
Module with the alcohol sensor MQ303A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020044
zł43.95
24h
Available quantity: 1
Available
Available
NUCLEO series starter kit equipped with an STM32U545RE microcontroller (512 KB Flash, Cortex-M33), with a built-in ST-Link/V3 programmer-debugger, equipped with Arduino-compatible connectors. STMicroelectronics NUCLEO-U545RE-Q
zł112.05
24h
Available quantity: 4
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-17745
zł125.42
24h
Available quantity: 3
Available
Data logger pre-programmed to automatically record data from IMU, GPS and Qwiic series sensors. SparkFun DEV-16832
zł285.20
24h
Available quantity: 1
Available
Module with 16-bit AD5693R DAC converter with built-in EEPROM memory. Equipped with a STEMMA QT connector, it communicates using the I2C bus. Adafruit 5811
zł57.47
24h
Available quantity: 3
Available
The kit includes a control module (with ETA1617 and NE555) and an ultrasonic transducer. The water atomiser module allows for the construction of, for example, a small humidifier. The module has a connector in accordance with the Grove standard. Seeed studio 101020090