New products

2-Channel GMSL MAX9296A Camera HAT for Raspberry Pi 5 - Waveshare 34504
  • New

2-channel GMSL camera expansion board based on the MAX9296A deserializer for connecting two GMSL cameras to Raspberry Pi 5, Jetson Orin Nano or Orin NX. It supports GMSL2 with GMSL1 compatibility, FAKRA Z camera connectors, MIPI CSI output and PoC camera power. Waveshare MAX9296-GMSL-HAT

zł350.55
6 weeks

No product available!

RGB LED Matrix 80 × 40px P4 HUB75 320 × 160mm - Waveshare 34431
  • New

Full-color RGB LED matrix with 80 × 40px resolution, 4mm pitch and 3200 light points. The panel uses the HUB75 interface, supports adjustable brightness and cascading, and measures 320 × 160 × 14.8mm. Waveshare RGB-Matrix-P4-80x40

zł129.88
6 weeks

No product available!

ESP32-S3 RGB Matrix Driver Board with Wi-Fi, Bluetooth and Dual Microphones - Waveshare 34422
  • New

Waveshare RGB matrix driver board with a HUB75 interface, based on the ESP32-S3-N32R16 module with a dual-core 240MHz Xtensa LX7 processor, 32MB Flash and 16MB PSRAM. The board integrates 2.4GHz WiFi, Bluetooth 5 LE, dual microphones, audio circuitry, a 6-axis IMU, temperature and humidity sensor, RTC and TF card slot for LED matrix interfaces and voice-enabled applications. Waveshare ESP32-S3-RGB-Matrix

zł114.19
6 weeks

No product available!

RP2350 Development Board with 0.85" IPS LCD 128 × 128 - Waveshare 34441
  • New

Waveshare development board based on the RP2350 microcontroller with a 0.85" 128 × 128px IPS display, 16MB Flash memory, QMI8658 6-axis IMU, audio codec, microphone, TF card slot and 8 programmable RGB LEDs. This version is supplied without a battery and supports an optional 3.7V lithium battery through the MX1.25 connector. Waveshare RP2350-LCD-0.85

zł65.35
24h
Available quantity: 2
Available
RP2350 Development Board with 0.85" IPS LCD 128 × 128 - Waveshare 34437
  • New

Waveshare development board based on the RP2350 microcontroller with a 0.85" 128 × 128px IPS display, 16MB Flash memory, QMI8658 6-axis IMU, audio codec, microphone, TF card slot and 8 programmable RGB LEDs. This version includes a 3.7V 1000mAh lithium battery with an MX1.25 connector. Waveshare RP2350-LCD-0.85

zł71.66
24h
Available quantity: 2
Available
COB RGB WS2812B LED Strip 5V 5m - Waveshare 34159
  • New

Programmable COB RGB LED strip measuring 5 m in length, featuring 800 LEDs at a density of 160 LEDs/m and WS2812B-compatible control chips. Powered by 5 V, it offers power consumption of up to 12 W/m, a width of 2.7 mm, and a 180° beam angle. Supports RGB color control with 256 brightness levels per channel and a total of 60 independently controlled segments. The flexible design with an adhesive backing allows installation in furniture, computer cases, and decorative lighting systems. The strip can be cut at designated points every 12.5 mm. The 5 m version features a male SM 3PIN input connector and additional power supply wires at the end of the strip. Waveshare RGB-27-5V-160D-5M

zł159.19
6 weeks

No product available!

COB RGB WS2812B LED Strip 5V 1m - Waveshare 34160
  • New

Programmable COB RGB LED strip measuring 1 m in length, featuring 160 LEDs per meter and WS2812B-compatible control chips. Powered by 5 V, it offers power consumption of up to 12 W/m, a width of just 2.7 mm, and a 180° beam angle. Supports RGB color control with 256 brightness levels per channel and 12 independently controlled segments per meter. The flexible design with an adhesive backing allows installation in furniture, computer cases, and decorative lighting systems. The strip can be cut at designated points every 12.5 mm. The 1 m version features SM 3PIN input and output connectors. Waveshare RGB-27-5V-160D-1M

zł36.89
24h
Available quantity: 2
Available
Wio-LR2021 Sub-GHz/2.4GHz LoRa Module - Seeed Studio 100058045
  • New

Multi-band Wio-LR2021 RF transceiver module based on the Semtech LR2021 chip, designed for wireless communication in the 863-928 MHz Sub-GHz and 2.4 GHz ISM bands. Supports LoRa, FLRC, (G)FSK, (G)MSK, 4-FSK, O-QPSK, and LR-FHSS modulation schemes, enabling data transmission at up to 2.6 Mbps in FLRC mode. Offers receiver sensitivity down to -141.1 dBm, transmit power up to +22 dBm, and current consumption of 583 nA in deep sleep mode. Equipped with an SPI interface and 22 SMT terminals, it operates with a supply voltage of 1.8 V to 3.7 V. Designed for IoT devices, LPWAN networks, telemetry systems, and tracking applications. Tape Reel version for surface mounting. Seeed Studio 100058045

zł40.36
4 weeks

No product available!

LTE Cat 4 EC25-EUX mini PCIe Module - Seeed Studio 113991135
  • New

LTE Cat 4 cellular communication module based on the Quectel EC25-EUX modem, designed for IoT devices, M2M systems, and industrial gateways. Supports 2G GSM/EDGE, 3G WCDMA, and 4G LTE networks in frequency bands used across the EMEA region and Thailand. Provides LTE-FDD data rates of up to 150 Mbps download and 50 Mbps upload, along with GPS, GLONASS, BeiDou, Galileo, and QZSS positioning support in GNSS-equipped variants. Features a Mini PCIe interface with USB 2.0 connectivity, SIM card support, and a 3-3.6 V power supply range. Its 30 x 51 x 4.9 mm dimensions allow integration with compatible computers and industrial controllers. Seeed Studio 113991135

zł226.52
24h
Available quantity: 2
Available
Throwing Star LAN Tap Pro - 10/100Mbps Passive Ethernet Monitor in Enclosure - Great Scott Gadgets
  • New

Passive Ethernet monitor designed to capture and analyze network traffic in 10BASE-T and 100BASE-TX networks. Equipped with four RJ45 connectors, including two for connecting the monitored Ethernet link and two independent receive-only ports for analyzing traffic in both directions. The device requires no external power supply and works with Wireshark and tcpdump. Its fully assembled design in a plastic enclosure allows immediate use without soldering. Great Scott Gadgets Throwing Star LAN Tap Pro

zł209.90
24h
Available quantity: 9
Available
Throwing Star LAN Tap Kit - 10/100Mbps Passive Ethernet Monitor Soldering Kit - Great Scott Gadgets
  • New

DIY kit for assembling a passive Ethernet monitor designed to capture and analyze network traffic in 10BASE-T and 100BASE-TX networks. Includes a PCB, four RJ45 connectors, and two 220 pF capacitors. Two ports connect to the monitored Ethernet link, while the remaining two independently receive data transmitted in opposite directions. The device requires no external power, works with Wireshark and tcpdump, and requires soldering before use. Great Scott Gadgets Throwing Star LAN Tap Kit

zł89.00
24h
Available quantity: 10
Available
HackRF One Bare Board - 1MHz-6GHz SDR Transceiver (Without Enclosure) - Great Scott Gadgets
  • New

Great Scott Gadgets HackRF One Bare Board supports radio signal reception and transmission over a frequency range of 1 MHz to 6 GHz. Features half-duplex operation, sampling rates up to 20 MS/s, and 8-bit I/Q samples. Equipped with a USB 2.0 Hi-Speed interface, SMA antenna connector, clock synchronization input and output, and expansion headers. The Bare Board version is supplied without an enclosure and includes a USB cable. Great Scott Gadgets HackRF One Bare Board

zł1,399.00
24h
Available quantity: 10
Available
Clear Acrylic Case for GreatFET One - Great Scott Gadgets
  • New

Clear acrylic enclosure for the GreatFET One development board, protecting the electronics from accidental contact and mechanical damage. Cutouts in the top panel provide access to the expansion headers, allowing additional neighbor modules to be connected. The enclosure consists of two acrylic panels assembled using the included screws and standoffs. The kit also includes stacking standoffs for expansion modules and a GreatFET One pinout reference sticker. The GreatFET One board is sold separately. Great Scott Gadgets Clear Acrylic Case for GreatFET One

zł77.63
24h
Available quantity: 10
Available
75MHz-1GHz SMA Telescopic Antenna - Great Scott Gadgets ANT500
  • New

ANT500 telescopic antenna designed for radio devices and SDR receivers, operating in the frequency range from 75 MHz to 1 GHz. Its length can be adjusted from 20 to 88 cm, while the rotating mount and adjustable elbow allow flexible positioning. Made of stainless steel, with an SMA male connector and 50 Ω impedance. Designed for use with Great Scott Gadgets HackRF One and YARD Stick One, among other compatible devices. Great Scott Gadgets ANT500

zł149.90
24h
Available quantity: 7
Available
DS3231 RTC Module for Raspberry Pi - Seeed Studio 103030278
  • New

Seeed Studio real-time clock module based on the DS3231 and designed for Raspberry Pi systems using the I2C interface. The RTC maintains seconds, minutes, hours, day, date, month and year information, providing an independent time source for data logging, automation and offline applications. Seeed Studio 103030278

zł56.60
24h
Available quantity: 3
Available
8-Channel 12-Bit ADC for Raspberry Pi - Seeed Studio
  • New

Seeed Studio 8-channel 12-bit ADC module designed to add analog inputs to Raspberry Pi. The board communicates over I2C, provides 8 analog channels A0–A7 and 4 Grove Analog connectors, and operates at 3.3V. Current versions may use the MM32F031F6P6 instead of STM32F030F4P6TR while preserving the same functions and usage. Seeed Studio 103030280

zł40.09
24h
Available quantity: 3
Available
Prusament PLA Galaxy Silver 1kg NFC Filament 1.75mm
  • New

Prusament PLA Galaxy Silver filament with a 1.75mm diameter and 1kg net weight, designed for FDM/FFF printing of decorative models, prototypes and functional parts with moderate thermal requirements. The Galaxy Silver variant provides a metallic silver glitter finish, while the material offers a density of 1.24g/cm³, filament tensile strength of 57±1MPa and low warping during printing. Prusament PLA NFC

zł146.96
24h
Available quantity: 3
Available
Prusament Woodfill Birch White 1kg NFC Filament 1.75mm
  • New

Prusament Woodfill Birch White filament with a 1.75mm diameter and 1kg net weight, designed for FDM/FFF printing of decorative and functional models with a wood-inspired surface appearance. The material prints at 195±10°C, has a density of 1.16g/cm³ and can be used with a standard 0.4mm brass nozzle. Prusament Woodfill NFC

zł189.08
24h
Available quantity: 2
Available
Prusament Woodfill Charcoal Black 1kg NFC Filament 1.75mm
  • New

Prusament Woodfill Charcoal Black filament with a 1.75mm diameter and 1kg net weight, designed for FDM/FFF printing of decorative and functional models with a wood-inspired surface appearance. The material prints at 195±10°C, has a density of 1.16g/cm³ and can be used with a standard 0.4mm brass nozzle. Prusament Woodfill NFC

zł192.08
24h
Available quantity: 4
Available
Prusament PA11 Natural 800g NFC Filament 1.75mm
  • New

Prusament PA11 Natural filament with a 1.75mm diameter and 0.80kg net weight, designed for FFF printing of technical parts, gears and moving components. PA11 provides a low coefficient of friction, high wear and impact resistance, UV resistance and temperature resistance up to 122.5°C after annealing. Prusament PA11 NFC

zł517.20
24h
Available quantity: 1
Available